The purpose of the case study is to research whether the brand Hollister can establish themselves to their target audience working with communication. To achieve the goal with the study, the following theories has been applied: brand building, visual communication, two-way symmetrical communication and communication channels. The study was conducted by a quantitative online questionnaire survey. The online survey was aimed at teenagers aged 15-18 years old living in Täby or Umeå where one question was "What difference can be discerned between Täby, where there is a shop, and Umeå where there is no shop". The material was collected during a period of eight days between december 11th to december 19th 2013.

Sweden has long had access to low electricity prices due to the wide availability of hydro and nuclear power. This has now changed because of today's rising electricity rates resulting in increasing heating costs for properties, especially in the properties with electric heating systems."Ankaret" is a parish for "Svenska Alliansmissionen", which is located at "Gullbrannagården".The parish has installed electrical radiators and an exhaust ventilation system that makes the energy demand high due to the large ventilation flows. The building was built as the price of electricity was still low and would reduce energy use today by combining its heating system with an air/air heat pump. The heat pump delivers more heat into the room than the electrical energy that it uses. This lowers the electricity needs.

Moisture damage in kitchens is an area that many people believe to be irrelevant andnot a subject to concern, however the problems encountered might be larger thananticipated.The purpose of this essay is to get a view of how problematic moisture damagecurrently is as well as what can be done to prevent damage during the constructionand building of new housing.Statistics regarding moisture damage as well as several tools for damage preventionhave been studied and investigated. Industrial regulations have been reviewed tounderstand the requirements construction companies must legally follow during theconstruction and building of new kitchens. Home manufacturers and largerentrepreneurs have been contacted in order to get their point of view regarding theproblems with moisture damages in kitchens.The knowledge of moisture safe constructions is prevalent by home manufacturers,insurance companies and entrepreneurs. Despite this knowledge, the constructioncompanies predominately follow the industries regulations, which normally onlyimplement the minimum requirements.In order to get construction companies to design and build kitchens with increasedmoisture security, stricter industrial regulations might be needed to be implemented.Unlike bathrooms and laundry rooms, kitchens are not defined as a ?wet room? andthe regulations for the construction of kitchens are more lenient.It is difficult to detect water leaks in an early state and the moisture damage is usuallyextensive before it is discovered and repaired if the kitchen lacks moisture securedconstruction and water security.

The purpose of this study is to propose and formulate quantitative indicators to help measure an aspect of the Environmental Objectives in Swedish legislation: ?A Good Built Environment, Interim Target 2.? The governmental bill 2004/05:150 suggests changes to Interim Target 2: By 2010 built environments of cultural heritage value will be identified and placed under long-term sustainable management. Following the revised formulation regarding sustainable management, indicators should be formulated to measure the fulfilment of sustainable management of built environments of cultural heritage value. An important part of management takes place at the municipal level of planning, where detailed development plans include regulations to protect built environments of substantial cultural heritage value. As a result, this study is focusing upon the regulatory function of the Swedish Planning and Building Act in respect to the built environments of cultural heritage value.

Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.

Population growth leads to an increased need for new buildings, both residential and commercial. The regulations of structural design also changes with time. From a sustainable community perspective it may be profitable if existing buildings, that no longer performs their original function, are reconditioned. Knowledge and understanding of the surroundings of the residence must be available. Regulations regarding accessibility to all has increased.

BIM, Building information modeling, anses idag som det nästa stora arbetssättet som kommer revolutionera arbetet inom byggnads- och anläggningsbranschen. Det tros att BIM kommer förändra hela branschen med allt från entreprenörer och konsulter till statens beställare. Företagen i Sverige tar ett sort ansvar för att utveckla och implementera BIM som arbetsmetod då de idag ser vinsterna som kommer komma med BIM. För BIM är inte bara ett arbetsredskap eller en teknik utan det är en helt annan arbetsmetod som kommer leda till många fördelar. Denna rapport presenterar översiktligt vad BIM är för den som inte riktigt vet vad det innebär och hur nuläget ser ut idag i Sverige inom byggprojektering och även lite i övriga världen.

NCC has given us a commission to investigate a planned housing area in Haga, Karlstad, situated close to the traffic route Hagaleden and the railway. The housing area consists of one hundred apartments in five different houses. The houses are linked to each other by balconies with glass panels. A long carport is situated between Hagaleden and the housing area to absorb part of the noise from the road. The design of the housing area is creating a silent backyard.

As an increasingly rationalized forestry and agriculture have human interference in the form of tradition, grazing and use declined. There is a strong link between biodiversity and disturbance of the landscape. In sandy soils many insects and plants require exposed sand to survive while the disorder may contribute to seed dispersal in the woodlands. On behalf of O-Ringen Skåne 2014, a study of the interference from orienteering in sandy soil and the forest during competitions conducted. The aim is to clarify the interference of which orienteering runners contributes, through to inventory presence before and after the competitions in the bottom and field layer in three locations.

During the past years fire has been identified as an important factor for nature conservation in the forest landscape. To accurately quantify the size of a burnt area is obviously important, but also to quantify the degree of fire damage to the tree canopy. Such data are important for assessing the conservation value, and to support planning and management of the burned area in the future. I have examined how to estimate the status of tree crowns after fire from interpretation of aerial photographs. This is possible because fire changes the structure of tree crowns and this influences the colours in aerial photographs by spectral reflection. Included in the study are four areas, three of which burned in 2005 and one in 2006.

In a time where information overload is a fact, well formulated messages is required and communication is a big contributing element for building strong brands. In the north of Sweden, Norrmejerier is one of the big actors with dominance on the dairy factor market. Through making milk products that lands in the consumers refridgerators, they are not only working for economical interest but also for improving the nature of the north of Sweden. Through visual communication, Norrmejerier shows the consumers a beneficial view of the north of Sweden which corresponds to the populations own impression of their part of the country. This contributes to a feeling of belonging that makes strong and loyal consuments. The feeling of belonging is also reflected in Norrmejeriers commercial movies, that uses the consumers conscience to make costumers. By two group interviews and a semiotic analysis of Norrmejeriers commercial movies, this study aims to examine how Norrmejerier uses qualities of the north of Sweden when building their brand.

For a long time, economic activity has decreased and shows a downward trend in the food sector. To break this requires efforts to strengthen corporate position with the ability to meet market challenges. In the small producers is a great potential for them to be able to increase its profitability thanks to its ability to offer added value in the product. But to achieve this requires not only a willingness and creativity out of the ordinary but also factors that lead us into this report, current issues. The issues are related to marketing, brand building and the importance of developing a stable network. The study aims to investigate how small businesses operate in rural areas are experiencing the possibilities of support from various networks and organizations and that, from a business perspective, and also see which areas that they need more support in to achieve a growing business. The work has been followed by an inductive method, when we initially could not say anything about the empirical results.

The survey aims to highlight and describe how the schools' teaching strategies look like in the work of pupils from the neuropsychiatric disability AD/HD (Attention Deficit / Hyperactivity Disorder). The pedagogical strategies have been investigated in an integrated and segregated teaching method. The study is qualitative in nature where the interviews conducted, first with a student who has been diagnosed AD/HD but also with teachers from each school who is well versed in student teaching and work. The results of the study show that knowledge and commitment about AD/HD is crucial to students' role and function in school. If knowledge and commitment is sufficient for the student teaching tailored to student needs and the risk of misunderstandings occur decreases. Security is a key factor for students who have been diagnosed AD/HD and learning form in itself is no guarantee that students will feel safe. Students have in the two teaching methods stressed that they feel safe at school and with their education and therefore has no teaching method preferred.

In this essay, Risk and crisis management Conservation policy and normalization production, I discuss how societies, communities and individuals are responsible for the handling of catastrophes and crises. Risk and vulnerability analyzes are parts of modern risk and crisis management. The purpose of these analyzes is to prepare people and organizations for any crises. For managing this it is necessary to comprehend, be able to change mindset in creating concrete tasks and inform others.The purpose of this essay is to analyze modern risk and crisis management by studying empirical material, such as interviews, observations and literature. My aim is to combine these materials and study how they cooperate.One of the findings in this essay is that risk and vulnerability analyzes are of great complexity. These analyzes require a discussion in order to identify the development of the society's crisis management system, as well as the continued support of the individuals that have a responsibility for preventing and preparing their organizations..

The main goal of this project was to develop some sort of a diverter for pipestransporting waste in a vacuum system. This unit was supposed to be both cheap andeasy to serve/exchange worn out parts. With a limited space to install the pipeexchanger, the challenge was to keep it as compact as possible without constructingbends with to small radius or to sharp angles as this would wear out the system a lotfaster than planned. The system was also supposed to be able to handle clothes andscrubs from hospitals. Having too much sharp edges or angles would tear the clothesapart.