The goal with this examination thesis is to investigate the difference in carbon dioxide emissions between a building with a wooden versus concrete carcassing from a life cycle perspective. The huge amounts of carbon dioxide released into air from human activities must be reduced to prevent serious consequences. A way to limit this issue is through performing a comparative study where the result shows which of two products with the same function has the lowest emission of carbon dioxide, whereof the product with the lowest carbon dioxide pollution can be chosen.To be able to perform a study like this an object has been chosen and studies about life cycle analyses have been done. The rental square meter, the thermal conductivity value, the energy requirements and the placement of the building has been set equal in both framework types. There were solely dissimilarities of the two buildings taken into account when this comparison study was performed.The result of the study is that a building constructed with a wooden carcassing has the lowest amount of carbon dioxide emissions.

In Swedish shops today there are a lot of magazines aimed at teenagers, which fight for young girls? attention. These teenage-magazines are one of the most important sources for young girls to get information about sex and love-relationships; therefor it?s important how these magazines portray it. We have examined how the magazine Frida has portrayed sex and love-relationships from 1991 until today. The way sex and love-relationships are portrayed in Frida?s articles affect the young readers in their process of building an identity. Using a combined rhetoric- and discourse analysis we found that the main focus in Frida is for the reader to have a love-relationship with a guy, instead of a physical sex-relationship.

This thesis has been carried out at the Department of Urban and Rural Development at SLU Ultuna during the spring semester 2009. The topic of the paper is how energy consumption can be influenced through design and if the conditions for good design decreases when solutions based on energy efficiency are used. The report is divided into one literature study and one part where energy efficient solutions are used in a design. The thesis work has its origin in a project called "Energihus i Uppsala." The planned building will be a center for energy research in Uppsala. The project aims to demonstrate to the public what is currently happening in research related to energy.

Tången 2 is a building situated in Stockholm, Sweden. It´s built in the 1930s and contains both residences and businesses. The property owner, Diligentia AB, wants to lower the energy use in Tången 2. This report consists of an energy audit which clarifies the specific circumstances linked to Tången 2. Collected knowledge is then used, together with the results from the literature study, to decide energy measures to proceed with.

The purpose of this study is to investigate the effect of physical activity for people suffering from depression and which nursing interventions nurses can do to make this patients start to exercise. The method used, is a review of articles from Ci-nahl, Cochrane, Elin, PsycInfo, Pubmed and Science Direct, which were analyzed according to Polit och Hunglers criteria for scientific research. The result from the nine studies shows that physical activity has an antidepressive and anxiety reduc-ing effect. Interventions emerged is supporting, encouraging, activating and teach-ing about physical activity as health-promoting measure. Conclusion: Nurses can as an intervention introduce exercise as complementary treatment for people suffering from depression.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

Test bench for air bearingsThis thesis work consisted of bringing forward and defining the test parameters relevant for a test bench and constructing a test bench that can test and verify the largest existing air bearings that are of use in Micronic Laser Systems AB machines. Because the knowledge about air bearings is limited it is thought that with the help of the test bench the knowledge would increase and in that way improve the air bearings.After learning more about air bearings and their purpose at Micronic Laser Systems AB, I started the concept phase for the test bench. For each part in the test bench I consulted my two tutors, Torbjörn Hedevärn and Johan Bergqvist, at Micronic Laser Systems AB. The final concepts where documented as 3D-modells in Solidworks and some of them have been tested in Solidworks FEM-program.The test bench is designed so that, with the help of a pneumatic cylinder, 25 kilo weights are placed on the air bearing to test its stiffness, damping and the pressure performance under its surface area. To test these parameters the test bench has to have a pressure meter, accelerometer and a microcator.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

A large proportion of the energy consumption is in the building industry and a large part goes to heating our homes and premises. In the developing countries' development now threatens the large consumption of energy in our earth's climate. It is in the West world that we must be good role models in terms of energy efficiency. One solution to reduce energy consumption for heating of buildings may be to continue to build low energy houses and passive houses, but it is also about rebuilding the buildings that currently have high energy consumption such as the old Million program Houses. These buildings will be standing many years and their energy consumption will not diminish over time by itself and energy prices will certainly not diminish in the future.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

Holmen Skog is one of the largest forestry companies in Scandinavia and they depend heavily on a large network of forest roads for production and logistics in connection to their forestry operations. The company recently introduced a new system for planning of road management. The system will also be developed with the intention to facilitate the monitoring of actions performed by road contractors. This report will provide information to support future decisions regarding further development of the system, after its introduction. In addition to a presentation of results from interviews, the report also provides a smaller study of the different subjects associated with roads, process work and process development. The study is largely based on interviews with road contractors that perform work for Holmen Skog today.

I have done a case-study about building a new stable for slaughter pigs at a farm close to Kalmar. The farm is able to supply the breeding with cereals and it has enough area to spread the manure on. The most important factors to gain profit, is the cost for building the stable, the price of the feeding-stuff and the growth of the pigs. The discount from the slaughter-house was less important than I thought from the beginning, and it?s a factor that is hard to influence. With the new production of slaughter-pig and cattle that already exist on the farm, the farm will get a well-functioned rotation of crops with lye and autumn rape as interruption-crop.

AimThe aim of the study is to examine how future teachers of Physical Education view the subject, the occupation and their attitudes about the future and create an understanding about this through these research questions:In what way do the teacher students justify the subject Physical Education?How do teacher students view the future of the subject and the occupation?According to the teacher students, what and whom affect the subject? Is there a difference between the teacher students?views and attitudes depending on if they are currently in their second or last year of their education?MethodThis study use qualitative methods in order to create a deeper understanding for the participants? views and attitudes. Eight teacher students of Physical Education were interviewed. The interviews were between 27-57 minutes. They were recorded, transcribed and then analyzed from a socio-cultural perspective as well as Bernstein?s theory of classification.ResultThe participants justify the subject in words such as that it gives the students? knowledge about how to uphold a decent standard of living and an understanding for the correlation between physical activity, nutrition, health and wellbeing.

The primary focus of this Master thesis is to study how industrial house building can be implemented during production of rental flats under the terms of public procurement. In order to determine a suitable working process as well as presenting a possible architectonic result of the process, a case study is carried through.A housing projekt is designed on a site i Malmö, where the commisioner is MKB Fastighets AB and the contractor is NCC Komponent with the industrial building system NCC Komplett. The focus of the design is to accomplish high quality apartments to a resonable price, as well as solving the overall scheme for the site.The housing projekt, Kv. Flaggskepparen, built on the consept of a single house model, used to handle the entire site, shows that the building system is well suited to accomodate the commisioners demands.In order to reach the best possible architectonic result with the building system, cooperation initiatded in an early stage of the process is neccesary.A model is proposed to handle the situation under the terms of public procurement. The model suggest that the geometrical design is mainly carried out after inquiry and that architectonic qualities should mainly be defined in a non geometrial way for inquiry..