The public interest in central living in today?s cities has led to an increasing effect of traffic noise pollution, and today 20% of the inhabitants in Sweden suffer from noise a level that exceeds the limits. At the same time the traffic keeps increasing, and recent researches shows that traffic noise pollution and several of today?s most common health issues are connected, for example, reduction of performance, sleeping issues and cardiovascular diseases. For this cause rules, guidelines and environmental goals has been developed, as well as software?s which calculates the levels of pollution, all this to investigate and improve the environment.

Climate and environmental issues is now high on the agenda. We live in a generation that must try to solve some major environmental problems. Buildings and habitations account for approximately 40 % of Sweden's total energy today. To reduce this figure, as needed, more research in the field of energy efficiency is required.This thesis concerns the heating of buildings. The load on district heating is heavy during certain times of the day.

AbstractThe real estate sector is today responsible for 40 per cent of the total amount of energy consumption within the members of the EU. All over the world there are collaborations within research and projects to find ways of reducing the amount of energy consumed by the real estate sector. In Sweden, a directive from the European Union has posed demands on authorities as well as on the private sector to reduce the amount of energy consumed by new building constructions. Together with the directive from the EU there are also new requirements and demands from Boverket for the real estate sector.  These requirements mostly concern the energy consumption of kilowatt-hour per square metre and that the consumed energy also should be renewable.  The aim of this study is to explain what kind of value municipalities experience in using certifications and environmental investments for new and existing buildings. Within the chapter theory, essential areas are described such as; environmental certification systems, economical viability, proceeds connected to building green, difficulties with building green, the performance of green buildings when affected by the behaviour of tenants and customer value.  The following chapter describes the methodology with which we have conducted this study.

All new households were to be constructed with "near zero energy house standards" (NZE-house) by the year of 2020. The ambition to construct energy-efficient buildings had to increase rapidly in the spring of 2013.The purpose of this report was to increase the interest for building contractors to construct apartment buildings with passive house standards. By locating and evaluating experiences from an existing passive house a case study including interviews, field visits and document analysis was made. Research of literature regarding other passive houses in Sweden also helped to answer the following questions:- What positive and negative experiences have the study of the passive house meant to the involved stakeholders and residents?- What improvements can be made based on identified experiences?- How can an apartment building be designed as a passive house based on possible improvements?By collecting good and bad experiences, as well as improvements and potential design proposals, a diagram was created designed as a tool for developers when constructing apartment buildings with passive house standards.

In this thesis proposals for different designs of a borehole thermal energy storage (BTES) have been developed for the building DN-huset in Stockholm, Sweden. To build a BTES results in savings in energy costs by approximately 44 %, i.e. 2 million Swedish crowns annually. Furthermore, a BTES would reduce the annual environmental impact with roughly 75-157 tonnes of CO2 equivalents per year, depending on how the electricity consumption?s environmental impact is estimated.

Byggbranschen står inför stora förändringar i framtiden i och med att BIM (Building Information Model/Modelling/Management) successivt introduceras inom området. BIM innebär en förändrad arbetsmetod som kan ge förbättrade möjligheter att minska tidsåtgången och omarbetningar i ett förprojekteringsskede samt skapa ett effektivare projekterings- och produktionsskede med färre fel. BIM är ett relativt nytt sätt att inom byggbranschen bedriva projekt och innebär en förändring för olika skeden inom byggprocessen vilket påverkar inblandade parter.Syftet med denna studie är att ta reda på hur Peab i Kiruna på bästa sätt kan nyttja möjligheterna som finns med BIM samt redogöra för några av de förändringar BIM kan innebära jämfört med nuvarande arbetsmetoder.En teoretisk del beskriver BIM och dess för- och nackdelar inom olika områden samt vilka hinder det finns för arbetsmetoden. Ett resultat baserat på den teoretiska delen förklarar att BIM i dagsläget främst bör nyttjas av Peab i Kiruna i ett anbudsskede, där ett förfrågningsunderlag görs om till en BIM-modell. Detta kan leda till underlättande för företaget att se fel i förfrågningsunderlag samt att utförande av mängdavtagning och kalkylering kan ske på ett enklare sätt.

During 40 years of industrial production, from the end of the 1890?s until the end of 1930?s, coal and wood distillation products were manufactured in AB Carbo?s tar factory along the River Gimån in Grötingen, in the county of Jämtland, Sweden. In accordance with the Swedish Environmental Protection Agency?s Methods for Inventories of contaminated sites, MIFO, the site in Grötingen has been identified as a potentially contaminated site. In order to determine whether toxic substances pose a threat to human health and ecological systems in the area, there was a need to investigate the presence of contaminants, their levels and potential for migration.

Funderingar kring användningsfall? Denna uppsats belyser användningsfallsmodellering, en enkel, effektiv och vida spridd metod, dock förenad med vissa svårigheter. En fallstudie är genomförd på två företag för att illustrera hur användningsfall utformas och om det finns någon utformning som kan ge mervärde för utvecklingsprocessen. Ett mervärde vi funnit är att använda beskrivningssätt som alla förstår. Uppsatsen belyser även svårigheter relaterade till framtagningen, varför dessa uppstår och hur de kan undvikas.

Vid objektorienterad systemutveckling är det viktigt att man genomför en analys- och designfas, dels för att man inom ett utvecklingsteam lättare ska kunna visualisera hur ett system är tänkt att bli och dels för att kunna fånga och åskådliggöra kundens krav. Till sin hjälp i dessa faser har man metoder/processer och modelleringsspråk. Varje företag har i regel haft sin egen variant av ovan nämnda, men allteftersom kom kravet på en gemensam standard att bli oundvikligt. Sedan ett antal år tillbaka finns nu en standard. Trots det finns det säkert företag kvar som ännu inte antagit denna standard.

Climate and environmental issues is now high on the agenda. We live in a generation that must try to solve some major environmental problems. Buildings and habitations account for approximately 40 % of Sweden's total energy today. To reduce this figure, as needed, more research in the field of energy efficiency is required.This thesis concerns the heating of buildings. The load on district heating is heavy during certain times of the day.

This thesis intended to examine how small enterprises within the retail industry work with brand building of their corporate name. More specifically it intended to examine how they do to choose corporate name and corporate logotype, and how they work to create a desired corporate image. A case-study was performed with three case-companies from different industries. The method was deductive as the empirics were brought in with starting-point in the theoretical frame of reference. The study showed that there are differences in the way small enterprises within the retail industry work with the brand-building of their corporate name.

This project is based on my fathers farm which lays outside Löberöd, twenty kilometres south of Eslöv in Skåne. While my family for some time have thought about building a new milkingstable with AMS(Automatic milking system) I decided to compare the AMS with a conventional milkingstable. We are abit concerned about how many cows we should have in the new stable. Because of that I calculated with two different number of cows. I have compared three different types of milking stables: One alternative is 180 cows milked in a double eigth hearing bone milking stable. The second alternative is 128 cows milked with two DeLaval VMS-robots. The third alternative is 171 cows milked with three DeLaval VMS-robots. One salesman from DeLaval and one salesman from A-betong helped me to get marketprices on the milkingrobots, building, ventilation and prices on all the concrete. In all the costs labour is included. The rest of the costs are calculated in a softwareprogram called K-data 03 which is a program with predicted costs. The calulations from the program showed that the price in the milkingpit system was 51 000 sek per cow.

The mistakes and failures on the roof are noticed during inspection of the construction, many of the commentaries are recurring. A contractor should only need to get a commentary once and then learn from the mistake. It has in this study been brought to light that the solution is not to tell the contractors to "stop slattern", it is more complicated than that. Today, the biggest problems are found in leadership, communication, feedback of experience and that the entrepreneurs take too little responsibility.To minimize the amount of commentaries all contractors need to work with a clearer leadership where the leader is both respected and appreciated. The leader must in an effective way be able to convey all the information to all employees.

During the last decennium climate issues have become more and more important. Many steps towards an adaption of efficient energy supply systems have been taken all around the world. These steps have been created to ensure the next generation?s energy demand. In EU and Sweden objectives have been set to ensure that the energy consumption decreases by 20% year 2020 and by 50% year 2050 compared with the energy consumption levels of year 1995.

A problem in the field of district heating is the oil burners needed to provide power when a peak load occurs. One possible way of reducing the needed amount of oil is to reduce the power demand for space heating in the district-heating substations when the need for district heating water exceeds a certain limit. This can be done by use of a locally working controller function.In this Thesis the options concerning load priority are evaluated. To evaluate the potential for using controller functions concerning peak load priority an experiment was brought out in a chosen district-heating substation. The impact on the indoor thermal comfort during a heat reduction was also taken into account.