A few hundred metres from the beach on Fårö, Gotland, is a small lot with pine trees, green moss and wild fl owers situated, owned by my brother and sister. Eventually they would like tobuild a summerhouse here, in close proximity to their relatives. My project is a proposal for the summerhouse at the site, within the restrictions of 61 m² building area, with focus on interior,exterior and the environment.My proposal is a house close to the surrounding nature, with reference to the the building tratition on the island and with local materials. Orientation to the sun, road and neighbours hasall infl uenced my ideas of this house and the relation between inside and outdoor living, were important in my creative work. The aim was to create a house made for the family and theirholiday lifestyle and allowed consideration for the possibility of a growing family with more children.

Akademiska hus is a real estate company that specializes in providing Swedish universities with housing facilities for educational and research purposes. The company strives to reduce its use of energy by 40% between the years 2000 and 2025. The aim of this thesis is to determine which measures can be taken to reduce the need of purchased energy in a building that is used by theSwedishUniversityof Agricultural Sciences inUppsala.In order to determine the results of various changes to the building envelope and ventilation system, the building was modelled in the computer simulation program VIP-Energy. Other proposed changes to make the use of energy more efficient concerned water use and lighting. The need of purchased energy can also be reduced by producing electricity or heat on site, using solar energy.Results show that economically viable measures include upgrading windows and faucets, adjusting control systems for ventilation and lighting, and installing roof mounted solar panels for power production.

The purpose of this report is to examine various roof structures that can operate in a warehouse with large spans. The building that is examined in the report is currently under construction, and the roof construction has already been selected. The selected roof system will therefore be compared with some other structures and materials that have been possible. The report will evaluate three different frame materials, two insulating barriers and two overlaying materials. Another important part in major construction projects is the roof safety.

Finnhamn is a small group of islands in the Stockholm archipelago. At Stora Jolpan, the biggest island, there is a hostel. The main building was built in 1915 and is called Utsikten. The purpose of this project is to on behalf of the Archipelago Foundation (Skärgårdsstiftelsen) find alternative systems that can replace the existing heating system of Utsikten (an oil-fired boiler and electricity heaters) to a system with renewable energy. The alternative system that this project focuses on is a system of solar collectors combined with a wood chip boiler.

The main purpose of this Masters thesis is to examine three Swedish librarians views on their role regarding their local learning centre and its adult students. The thesis also tries to find out whether the persons responsible for the local learning centres in these municipalities regard the libraries as a resource in this context and if the municipalities express the importance of such a cooperation in documents. Previous research in information seeking and learning is presented and a survey of lifelong learning, local learning centres and libraries is made. Relevant theories, such as Loertschers taxonomy, Kuhlthaus approaches of library skills instruction and levels of mediation as well as Bruces categories of information literacy, are presented and later used in the analysis. A qualitative method was found to be most appropriate for this study, as the majority of the empirical material has been collected through interviews.

This is an investigation of a mobile prefabrication factory´s competitiveness and profitability which also will result in a suggestion for a design of the factory. The mobile prefabrication factory is an idea of a new concept for production which is meant to be used in the manufacture of slab. The main intention with this concept is that by using a fast established prefabrication factory to produce elements near the construction site, thus avoiding transport from the factory to the building site. This means not only an environmental and economic gain, but also that you can avoid risking damage the elements which often occur during transportation. The contractor is owner of the mobile prefabrication factory and can thus avoid long waiting times and cyclicality.

Vid objektorienterad systemutveckling är det viktigt att man genomför en analys- och designfas, dels för att man inom ett utvecklingsteam lättare ska kunna visualisera hur ett system är tänkt att bli och dels för att kunna fånga och åskådliggöra kundens krav. Till sin hjälp i dessa faser har man metoder/processer och modelleringsspråk. Varje företag har i regel haft sin egen variant av ovan nämnda, men allteftersom kom kravet på en gemensam standard att bli oundvikligt. Sedan ett antal år tillbaka finns nu en standard. Trots det finns det säkert företag kvar som ännu inte antagit denna standard.

This is a study about the transition process and the consolidation of power in Belarus. In this paper the concept of "authoritarian state building and the sources of regime competitiveness in the fourth wave" is the major theory used. After giving a description of the theory?s concepts a short historical background of Belarus follows. Chapters four describes and explain the political situation in Belarus during five periods.

A study to optimize insulation thickness for stock-, industrial- and office-buildings for external walls and roof in an economical perspective has been conducted on behalf of DynaMate. DynaMate?s role is to maintain all Scania?s buildings. Analysis has also included other parts of the building envelope, such as windows, exterior doors and industrial doors. In this thesis, three different types of exterior wall constructions has been investigated, these are a sandwich design consisting of sheet metal and a another one consisting of concrete, as well as a wall of concrete with a coating of plasters.

VAV (Variable Air Volume) system has been studied in a newly constructed office-building. The goal for the study has been to evaluate how the ventilations system work in practice, if adjustments can be made to achieve an more energy efficient system and to evaluate if other alternative ventilation systems is to be preferred in the further.The degree project has been executed at Helenius Engineering Firm who is working with the environment, media systems, HVAC and energy in buildings. The building that has been studied is owned and operated by Akademiska hus.Literature studies, visits at site, inventory, review of system documentation, energy analyses, interviews, key figures, LCC, sand energy- and indoor climate simulations has been made to study the building. Where appropriate some tools from Six Sigma have also been used.How to achieve an energy efficient system and a pleasant indoor climate is studied with human health and well-being as base for the indoor climate requirements. Technical support systems such as ventilation systems have to be designed so that an acceptable indoor climate can be achieved.

The forest industry is one of the most important industry branches in Sweden. Since the demand of high precision wood deliveries has increased, the demand on a well constructed forest road net also has increased. A good road net gives the wood-supplier competition advantages and also increases its service level towards its customers, lumber-mills and pulp-mills. In some parts of Norrbotten, the road net is still insufficient and not yet built out enough, and that is why it is important to know how to act and where to improve the road net in these areas. The purpose of this thesis was to create a work-model for long term road planning in areas with no road net or a not yet complete road net. The model has been created in an ArcGis environment, where a long chain of tools has been tied together with the program ?Model builder?.

Abstract This degree project examines how much carbon dioxide that emits during the construction phase of a road project. This is to make it possible to compare how the amount of carbon dioxide differentiates between traditional road construction and Swepave construction, which is PEAB?s alternative way to design roads. To make the comparison a calculation tool has been produced. To compare the amount of carbon dioxide emissions a reference project was needed.

This thesis is based upon the work done at Westinghouse electric company (WEC)inVästerås during the spring semester of 2015 and describes the development of a quickcoupler with associated blade changing tool. These are meant to be used togetherwith a sawing tool that the company uses for the dismantling of nuclear reactors,which is performed under water.The aim of the thesis was to develop a complete manufacturing documentation withdrawings and related CAD models which Westinghouse later can use to manufacturethe tool and the quick coupler. It was also included in the assignment to, if necessary,modify parts of the saw tool to adapt these to the intended blade changing tool.A number of visits to the company's workshop was made during the time to study thesaw that the thesis is based upon. The purpose of these visits was to get a better ideaof the dimensions, construction and the field of use of the saw. On three of thoseoccasions various engineers and consultants accompanied us to discuss possibleproblems with different ideas.This was interspersed with information in the form of literature studies on quickcouplers to create a clearer picture of the nature of the task.When enough information had been gathered a functional analysis was made to dividethe main problem into subthis phase the idea and concept generating process took place.The methods used for this was mainly brain writing and brainstorming.

An information system is something that evolves over time to enhance the company that is using it. The technology for building an information system is also evolving. New methods and new programming languages make system development easier. As new technology breaks ground and the demands of a company?s information system grow, the company will sooner or later get to a point where a change in the base of the system is necessary.

This is a thesis project in the field of information technology which begins by evaluating existing food price comparison systems and subsequently aims to design an improved, web based system for said purpose. The system features interfaces for price reporting, price comparisons as well as various search and review functions. The objective is to create a system able to compete with existing price comparison systems, which requires careful selection of products that can be found in all foodstores that also represent different households; a user-friendly price reporting and price comparison interface and an efficient tool for ensuring the validity of reported prices.The designed system features a more accurate formula for calculating average prices in events where the real price is missing; a more reliable security mechanism forv alidation of reported prices and a more comprehensible interface for viewing price reports, reporting prices, reviewing stores and products in comparison with existing systems. The system does, however, suffer from some optimization issues primarily in the form of inefficient database modeling; SQL queries and JavaScript code although testing has shown that these shortcomings do not hamper overall performance to such a degree that usability is compromised. Further usability testing performed on the system with five test subjects shows that a high level of overall user-friendliness has been achieved even though some special features, such as the detailed report containing price information per product for each store need to be improved.It is not possible to say at this time whether or not the designed system will be able to compete with existing ones or if the very concept of food price comparisons per se is viable in terms of profitability and marketability.