Together with NCC and Sweco we measured the air-flow on a semi-detached house in Jönköping. When a pressure measurement is made, the house gets exposed to over- and under pressure. This is done in order to examine the houses climate shell. The climate shell of the semi-detached house we tested exceeded the required air thickness in BBR-2002, hence, measures have to be taken.This report also displays the importance of building air thick houses and what consequences a non air-thick house can have for the ones residing the house. A discussion of different measures is on for the addressed problems with the flow-measurement and the alternative construction-solutions.Furthermore we have described in this report of how to account for the performance of the air pressure, what kind of equipment we used and how we came up with the results.

The aim of the study was to through empirical studies interpret the relation between three partially investigated house foundations, on an abandoned farm in Langhammars on northern Fårö. This relation focused upon two main questions; the time of use and the spatial distribution of the archaeological finds.Trough comparative analysis two of these houses can establish to have been contemporary, the third one is too roughly examined. A discussion about the hypothec idea of two or three contemporary farms was made with a negative result.In house 1 smaller processing of tools of flint has taken place near the fireplace in the larger room. A concentration of pottery was also visible near the fireplace, likely to be connected to cooking and eating. The smallest room in the northeast part of the house could have functioned as a storeroom and/or held workshop activities.The archaeological finds and the distribution of it, strongly indicates that house 1 mostlikely consisted of a dwelling house and house 2 functioned as a workshop; linked to activities with handicrafts.

The purpose of this paper is to analyze the project Knitting House using art and architectural theories to question the forms of the project as well as the town planning in the area of Husby, a suburb to Stockholm. In order to stress the architectural issues in the area of Husby, the thesis examines the aim and intention of the project Knitting House. The project explores the standardized architectural form that was used and built under the Miljonprogrammet, through the years of 1960-1970 in the neighborhoods of Järvafältet. The thesis will also investigate some of the problems that arise when attempting to discuss knitting as a method used to perform Knitting House. This paper explores the relationships between public and private spaces, the areas in between them and how they interact. The claim made throughout the thesis is that Knitting House can function as a political catalyst by presenting a combined perspective of art, architecture and politics to address the social and ethnic segregation in suburbs like Husby. .

AbstractTerrace III in the Birka Garrison. An analysis of function based on artifact quantification and find preparation. This paper deals with Terrace III in the Garrison of Birka, Uppland, Sweden. The main purpose is to investigate the function of Terrace III. The analysis consists of two parts.

The following article consists of two parts; one part is about house construction and the other is a specialization about radon. The house construction part describes how to project a house from start. It contains the conformation of the house, the installations needed, calculations considering the strength of the construction, energy calculation and what materials were chosen. Calculations considering the costs of building and operate the house has been carried out. The result showed that the house would cost approximately two million Swedish kroner to build and thirteen thousand kronor a year to operate.

Today all buildings contain some form of home automation. It might be heating controlled by athermostat or motion detectors controlling outdoor lighting.This paper,The Intelligent House, deals with the planning of a house in Kiruna, in the north ofSweden and further immerses itself in home automation or intelligent control in single-familyhomes. The house has been entirely planned, from layout to structural design and plumbing.The purpose of the paper has been to investigate the possibilities in home automation in singlefamilyhomes and to choose a suitable home automation system for the house being planned.The system has been designed and the costs and energy savings have been calculated.The system chosen for the house is called KNX and is the largest system for home automation inSweden. It is used to control heating, ventilation, lighting and alarm systems in the house. Is hasbeen found that KNX is very expensive and that the amount of energy, possible to save in thehouse, using the system, is relatively small.

This essay has been made on behalf of the co-operative society Mäster Grön, which is selling ornamental plants to retailers in Sweden. The aim of this study has been to find out what added value Mäster Grön gets from their co-branding with the Swedish Seal of quality. The main topic of discussion was; how much value added does this co-branding give to Mäster Gröns pot plants? Are there differences from a customer point of view in value added between a garden center and a retail store? How much weight does the costumer put on the branding when buying a plant? Does the customer know what the values of Mäster Grön and Swedish Seal of quality mean? Two questions of lesser worth were asked to the consumers about what they thought about the protective plastic around the plant, and if they were interested in getting more information about the origin as well as the method of production of the plant. The study was divided into two parts, one in which customers were observed and one where the customers answered a survey.

This report is the product of the course AF101X, a bachelors degree in Samhällsbyggnad atKTH. The task of the course is to design a small house at a given location and also implement adeepening study. The house in this report is located in Kiruna in the north of Sweden, where theclimate is much colder than in the rest of the country.The deepening study of this report is to evaluates how realistic passive housing north of thePolar Circle is based on those facts. The house will to some extent be designed to fit the passivehousing standard.

When I got the opportunity to write this examination did I want to write about something that I both was interest in and also can use in the future. I think it?s going to be difficult to carry on the milk production with only 28 cows. I wanted to investigate the possibility to increase the herd of cows. I also wanted to compare this cost with a new cow house the cows where milked with a robot.

This report is of technical character and treats how to plan a small building in Borlänge, Sweden.The technical components that have been treated in the report are the construction, foundation,installations and thermic abilities of the house. In addition to planning this house the report alsocontains a part that deepens in net zero energy buildings. The purpose of the report is toinvestigate if the house in Borlänge can be constructed to meet net zero energy buildingdemands.Energy efficient houses such as passive- and net zero energy houses are showing more frequenton the market in Sweden. Ongoing climate changes and growing consciousness about theenvironment in society have contributed to that the environment is a well discussed topic. Toconsume small amounts of energy and at the same time produce local energy is thereforesomething that lies in the future and future houses.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

This study was made to examine what the Fountain house can do to help their members and how the members feel about their situation and their ability to participate in their rehabilitation. To do so we contacted one of the Fountain houses in Sweden, located in Falkenberg, to get a better view of what their members thought about the process. Our main purpose with this study was to turn the spotlight on what the Fountain house organization means to its members. To do so we had two main questions that we wanted to examine more closely:?How do the members experience the Fountain house organization? ? To which extend do the members feel that they are allowed to participate in their rehabilitation? ? How much influence do the members feel that they have? For this study we choose to use the qualitative method which included a lot of literature research, observations and interviews with members of the Fountain house organization.

Recently, retailers within the Swedish grocery retail sector have launched lines of products under its own brand, quite often produced by manufactures within the same category of products. The common term of this phenomenon is called private labels. Therefore, private labels could be seen as competitors against branded goods, despite the fact that it is, in several cases, the same manufacturer who produces each of the products.The main purpose of this study is to provide understanding of how the manufacturers choose to position themselves, formulate their strategies and compete on the market among private labels, also to examine the motive behind the manufacturer's choice to produce private labels. The study intends to provide a broader view of how the interaction between manufacturers, retailers, private labels and branded goods appears on the Swedish market. We decided to use a qualitative research method and personal interviews to approach the study.