Sökresultat:
440 Uppsatser om Branch diameter - Sida 19 av 30
Anpassad skötsel - exempel på hyggesfritt skogsbruk i Mellannorrland :
Total protection is often the option chosen when protecting forests with high environmental values. An alternative to total protection is application of management regimes that do not interrupt continuity of tree cover. This study focuses mainly on continuous cover forestry (CCF) in forest stands already protected. All objects are situated in the county of Jämtland in northwest Sweden.
The purpose of the study was to attain a greater knowledge about CCF practices.
Skogstillväxten ca 20 år efter plantering på Flakmossen : dikningens och gödslingens betydelse vid beskogning på en avslutad torvtäkt i Värmland
This study was performed in an afforestation experiment established 1982 on an abandoned peat harvesting area, Flakmossen, in the province of Värmland, SW Sweden. The experimen-tal design include planting with Scots pine (Pinus sylvestris), in combination with various drainage intensities (20, 30, and 40 m between ditches), and fertilizer doses 0, 100, and 200 g PK per seedling applied at the date of planting.
The aim of this study was to achieve more knowledge about the conditions on afforestation of peat harvesting areas, especially regarding drainage intensity and fertilization requirements, by means of determining the stand growth and yield in the Flakmossen trial.
The forest growth did not differ significantly between the drainage intensities tested when the same amount of phosphor and potassium fertilizer was added. Thus, shorter distances between ditches than 40 m can not be recommended.
When no fertilization was carried out seedling survival was very low, and the growth of sur-vived seedlings was poor. The largest diameter and height growth were observed in the areas where the highest dose of phosphorus and potassium (200g/seedling) was given.
Rening av avloppsvatten med anaerob membranbioreaktor och omvänd osmos
This master's theses was carried out on assignment from Stockholm Vatten AB as a part of a project developing new waste water treatment techniques. The goal of the theisis has been to evaluate an anaerobic membrane bioreactor for treatment of waste water from Hammarby Sjöstad. The bioreactor has not been heated and the main interest has been to study the gas production, power consumption and the reduction of organic matter and nutrients.The system has been completed with a reverse osmosis unit and a total of four batch runs have been made with good results. The use of reverse osmosis allows nutrient in the waste water to be reintroduced into circulation as the reverse osmosis concentrate can be used as crop nutrient.The membrane unit is of VSEP ("Vibratory Shear Enhanced Processing") type and an extensive membrane test has been conducted. This so called L-test helped determine the most suitable type of membrane for the system to allow a higher ±ux and thus lower power consumption.
Webbaserat kanotbokningssystem : För Friluftsfrämjandet i Uppsala
På Sandvik Materials Technology, SMT, Rörverk 68 i Sandviken tillverkar man ånggeneratorrör till kärnkraftsindustrin. Rören är upp till 30 meter långa och ca 20 mm i diameter, så när de ska lyftas upp ur ett rörställ där de mellanlagras, kräver det stor försiktighet. Inte minsta repa får förekomma på rören och de får inte bli krokiga. Lyftet görs nu för hand vilket inte är lämpligt ur arbetsmiljösynpunkt. Därför finns behovet av ett lyfthjälpmedel som underlättar för operatörerna.
Konstruktion av lyftanordning för slanka känsliga rör
På Sandvik Materials Technology, SMT, Rörverk 68 i Sandviken tillverkar man ånggeneratorrör till kärnkraftsindustrin. Rören är upp till 30 meter långa och ca 20 mm i diameter, så när de ska lyftas upp ur ett rörställ där de mellanlagras, kräver det stor försiktighet. Inte minsta repa får förekomma på rören och de får inte bli krokiga. Lyftet görs nu för hand vilket inte är lämpligt ur arbetsmiljösynpunkt. Därför finns behovet av ett lyfthjälpmedel som underlättar för operatörerna.
Förekomst av törskate (Cronartium flaccidum, Peridermium pini) på tall (Pinus sylvestris) i relation till markfuktighet och fältskikt : en studie om 2000-talets törskateepidemi i norra Sverige
Resin-top disease is a rust fungi that occurs both as a host alternating form, Cronartium flaccidum G. Winter., and as a non-host alternating form, Peridermium pini Pers. The host alternating form can use a variety of hosts but the most commonly used species in the boreal forest is Melampyrum sylvaticum. In Scandinavia the Resin-top disease infect Scots pine, Pinus sylvestris L. The fungus infects the needles through the stomata and then grows through the branch to the stem where it strangulates the vessels transporting water and nutrition to the treetop, which kills the top.
Mode och varumärke i modeföretag - Dess eventuella samband och yttringar
Syfte: Syftet med uppsatsen är att kartlägga hur ett tänkbart samband mellan mode och varumärke kan se ut i modeföretag. Metod: En kvalitativ studie med ett abduktivt angreppssätt. Slutsatser: Sambandet mellan mode och marknadsföring i modeföretag är mycket starkt, även om branschen i sig, historiskt sett inte agerat som om så vore fallet. Centrala faktorer för modeföretagen med ett starkt samband i just dessa två begrepp är bl.a.: ? Överexponeringsproblematiken, det faktum att varumärken kan förbrukas.
Hyggesbränning på Orsa besparingsskog - en studie på tillväxt och föryngring,15år efter etablering
The main purpose with this study was to investigate whether the tree growth differs or not in prescribed burnt areas compared to mechanically scarified. Together with the result from the main purpose, answers of whether it's possible or not to combine nature conservation with tree production in prescribed burnt areas was presented. In these areas the regeneration were analyzed to see if there was enough tree plants to comply with the Swedish Forestry Act regulations terms for approved regeneration. A field survey was conducted at 6 objects, three objects for prescribed burning and three for mechanically scarification. All objects were planted within the same year.
Svensk kod för bolagsstyrnings påverkan på aktiekursen i företag med frivillig tillämpning
Due to a rising debate concerning corporate governance that has caused increasing demands for companies? transparency, several codes of conduct have been introduced. The Swedish Code for Corporate Governance is obliged to companies with a turnover exceeding three billions. There are companies that voluntarily apply the Swedish Code. Possible causes to this phenomenon ought to be that the code for corporate governance conveys legitimacy through the insight into the affairs of a company the public receives, through the report of the corporate governance that is published in the annual report and on the home page of the company.
Organisationsplan för Skanska Direkt Värmland
AbstractSkanska Sweden has decided to split the organization that earlier handled both large and small projects into two different subsidiaries. A consequence of this is that all construction service handling will from now on be enforced under the name Skanska Direkt AB. The management of Skanska sees this as an opportunity to develop the organization and in the long term achieve higher earnings. The task which Skanska in connection with the reorganization wanted to be investigated was a proposal on how the organization of work with the insurance work in the future should look like.The organization that is handled is from production manager to professional workers and includes damage handling that has been obtained from insurance companies in the southern and northern parts of Värmland. The purpose with this work is to present a different kind of view to the problem with developing this branch of the company. The main target was to work out a proposal of an organizational plan for the damage handling in Skanska Direkt AB that is possible to apply, less sensitive for dismissals, results in higher earnings, obtains higher customer satisfaction and also a staff stab that develops their skills at their own.The report and work progressed as following:Opening theory study of strategies to obtain the objectives set.Restructuring of existing organization with theories as support.Interviews with the actors involved to verify feasibility of the developed organization plan Organization chart, the result of work means that some workers at each location shall be responsible for a small group of workers and work independently. They shall manage the process of invoicing and calculate costs at the same time as they work out on the workplace.
En undersökning av Elektromagnetiska störningar på hörselmätningsutrustning
Cnior Mobile AB i Lindesberg utvecklar en mobil trygghetstelefon för äldre. Detta examensarbete går ut på att utforma en handsfree-enhet för denna. Handsfree-enheten ska integreras i larmknappen, som bärs av användaren runt handleden, och har kontakt med telefonen via blåtandsradio. I examensarbetet ingår att välja ut lämplig högtalare och mikrofon, hitta lösningar för smuts- och vattentålighet samt att lösa problem med ekon och bakgrundsstörningar.En högtalare hittades som uppfyllde kraven för smuts- och vattentålighet samtidigt som den hade utmärkt frekvensgång för återgivning av tydligt tal. Vattenavrinning från högtalaren löstes genom att ett sinussvep sänds ut från högtalaren varje gång ett samtal ska kopplas upp.
Produktivitet och lönsamhet vid skogsbränsleuttag längs skogsbilvägar :
With an increased demand for biomass based energy and with development of better technique harvest biomass, new possibilities open up. With the possibility to combine traditional cleaning of road?s right of way with biomass harvesting, the work of suppressing tree vegetation could become profitable or at least decrease the road maintenance cost. However, knowledge about productivity and profitability in mechanical biomass harvesting in roads? right of ways are still limited.
Digitala nämndhandlingar : Kartläggning och jämförelse av användningen av beslutsunderlag i två olika nämnder
På Sandvik Materials Technology, SMT, Rörverk 68 i Sandviken tillverkar man ånggeneratorrör till kärnkraftsindustrin. Rören är upp till 30 meter långa och ca 20 mm i diameter, så när de ska lyftas upp ur ett rörställ där de mellanlagras, kräver det stor försiktighet. Inte minsta repa får förekomma på rören och de får inte bli krokiga. Lyftet görs nu för hand vilket inte är lämpligt ur arbetsmiljösynpunkt. Därför finns behovet av ett lyfthjälpmedel som underlättar för operatörerna.
Byggnadsdetaljers påverkan på lufttätheten: Och hur vi som brukare påverkar lufttäthetens beständighet
I ett samhälle som strävar efter en mer hållbar utveckling måste vi minska vår förbrukning av energi i hela samhället. Fastighetssektorn står för en stor del av den totala energiförbrukningen i Sverige och när vi avser att bygga mer energisnåla byggnader är lufttätheten en viktig fråga att ta hänsyn till. Även om energiförbrukningen är det vanligaste argumentet för att uppföra byggnader med god lufttäthet finns det många fler goda skäl. I en byggnad med god lufttäthet minskar risken för fuktskador, termiska komforten ökar, luftkvaliteten förbättras och byggnadens ljudisolering blir bättre. I det här examensarbetet har en fallstudie genomförts där ett antal olika detaljer har testats för att se vilken påverkan de har för byggnadens lufttäthet.
"Vadå, har du bara en examen?" : En studie om relationen mellan studier och extraarbete
This study discusses the relationship between studies and part-time work. The aim is to gain a deeper understanding of why students enrolled in the programme of human resource management and working life choose to undertake part time work, specifically in the human resource business in such great extent while studying full time and what this means for the students regard gaining knowledge. It focuses on the students experience and in order to gain the understanding of this phenomenon three qestion formulations were formed; ?What are the reasons formed by the interviewed human resource-students for having part-time work in the human resource bransch, in addition to their full-time studies??, "What values are made visible regarding the students choices of having a part-time work in addition to their full-time studies?" and ?How does the students express the thought about their part-time work as a key to learn from their studies?? The empirical data were collected through interviews with eight branch-specific human resource-students. The data was analysed based on previous research and a theoretical framework consisting of Lave & Wenger's theory of communities of practice and John Deweys theory of learning by doing.