A current conveyor is an active building block that can be used to implement most active and passive components. It differs from the operation amplifier in that it uses current instead of voltage. The current conveyor also has significantly higher voltage gain over a broader frequency range. To simplify the construction of analogue circuits and increase the construction efficiency it is desirable to use a top-down methodology. This means that the whole system is partitioned into a hierarchy of subsystems.

How do we match our education with the needs of the construction line of business and the requirementsof the Swedish National Agency for education? Is there something that we have to change?In this study I have asked our former students about their opinion of our education and I have also asked them to give me their view on what a good teacher is like. I have been able to benefit a lot from their answers in my efforts to be that good teacher. This survey took place at Facebook.The answers showed that we carry on a piece of solid workmanship. But you can always improve, try harder.

The aim: was to describe and compare a group of experts and critical care nurses' agreement in detecting delirium in intubated, ventilator treated patients with sedation / analgesia, before and after an in house training intervention with the instrument Confusion Assessment Method for the Intensive Care Unit (CAM-ICU).Method: A quasi-experimental study, one group pretest - posttest design. A convenience sample of 17 critical care nurses in a general intensive care unit included. To detect delirium the instrument CAM-ICU was used, 21 paired tests before and 22 after an educational intervention.Main Results: The results showed that after an in house training intervention sensitivity and kappa coefficient improved of the characteristic 1 "acute onset and fluctuating course," an improvement that was significant. In other features, and overall values were signs of numerical improvement and deterioration in sensitivity, specificity and kappa coefficient but no significant change.Conclusion: Implementing a new instrument for detecting delirium in clinical practice requires education and follow-up. A small sample of critical care nurses with varying ability to use the new instrument and the fact that patients' status may change rapidly making it difficult to draw any conclusions from this study.

This is a degree project performed at Halmstad University in Sweden on the subject carpet ofreinforcement. This project is developed in association with Celsa Steel Service in Halmstad.The purpose of this report is to investigate how much time that can be saved if carpet ofreinforcement is used instead of the traditional way to work with reinforcement and seewhat kind of parameters that is important between the choices. We are also going to seehow this product affects the situation for reinforcement workers from an ergonomic point ofview.Carpet of reinforcement is made by straight reinforcement?s bars that are welded togetherwith steel bands. These rolls are made at a factory with a machine that welds together thebars in determined centre distance, with desired dimensions after the constructionengineers? blueprints.

Every year more than 6000 thefts, to a value of 1.5 billion SEK, are reportedwithin the Swedish building trade. Plus all the indirect costs of having theconstruction site standing still.SafeTool is a newly started company that will try to prevent this problem witha modern technology solution.The key to SafeTool?s solution is RFID ? Radio Frequency Identification ? andthe solution looks like this;All tools are stored in a container on the construction site. Every tool isequipped with a RFID-tag that uniquely identifies the tool. With antennas in thecontainer it is possible to detect when a tool is leaving the container and whenit comes back.

Denna rapport ger en bild av vilka olika saker byggherrar i Sverigeanvänder sig av idag för att öka den sociala hållbarheten. De projektsom studerats är Bygga om Dialogen i Malmö, Älvstaden i Göteborg,Vivalla i Örebro och föreningen Byggemenskap.Genom att intervjua en person från varje område studeras likheteroch skillnader i hur man arbetat med den sociala hållbarheten vidbyggnation. I Malmö och Örebro studeras arbetet med att öka densociala hållbarheten vid renoveringsobjekt, hur får de hela områdensom länge haft ett dåligt rykte att bli socialt hållbara där stort fokusligger på att anställa långtidsarbetslösa.I Göteborg och i föreningen Byggemenskap fokuserar man på attföra in den sociala hållbarheten vid nybyggnation och hur vi kan byggahyresrätter som har en lägre hyra än nybyggda lägenheter i dagslägethar..

An era ended in 1920 when the Walloon ironworks village of Strömsberg closed. The Wallon people had lived on the spot for 300 years and influenced the region was a lot. The kitchengarden in Stromsberg was a gardencenter 1920-50. The count´s good profits made him reinvest a lot of capital in the Wallon ironworks village to make it better and to construct forges, buildings and gardens. The kitchen garden´s history in Stromsberg started in 1660-70s, when Johan Vervier, built Strömsbergs first manor house.

We live in a time where the influence of citizens is taking a larger role in the spatial planning. The Swedish laws, such as PBL, deals with matters of citizen participation which advocates that the youth should be included in the consultation circuit, but there is no directive given.  The report's purpose is to demonstrate methods for how to get the young people's influence included in the spatial planning, with a main focus on the ages between 13 and 21. On the base of literature and two case studies, the goal is to illustrate how to integrate young people through a meeting place in Jonkoping, Sweden. The report is structured along with an analysis based on the literature, two case studies from previous projects and discussions/interviews with young people from four selected areas in Jonkoping.  The case studies from Malmo and Gothenburg show how the cooperation between different participants can be organized during the planning and how to give the users a greater involvement. Based on literature and case studies, we carried out a field analysis of the four most segregated areas of Jonkoping; Osterangen, Oxnehaga, Ekhagen and Raslatt.

Background: Today there are high claims on organizations to show a positive economic view. To satisfy the demands and expectations from interested parties it is very important to carefully plan the companies tied up capital and cash flows. Purpose: The purpose with the thesis is to describe what actions organizations take to resolve the conflict between showing a positive cash flow and the need to tie up capital.The purpose is also to explain the different factors that must be considered when making decisions regarding cash flow and capital tied up. Method: A qualitative study of the actions and factors wich must be considered when decisions in swedish construction companies are made regarding cash flow and capital tied up. Results: A model of the factors and actions that affect cash flow and capital tied up in projects.

The purpose of this essay is to investigate the subject field of male vegans and masculinities through empirical method interviews and narrative analysis. The starting-point for this essay is animal ethics, feminist ethic vegetarianism and theories that suggest that eating meat is one part of the social construction of masculinities. The problem formulation is such as follows:How do male vegans construct masculinity? In an attempt to answer such a question there are three problem formulations:What do male vegans think about the connection between manhood and eating meat?How do male vegans relate to the norms in society?What do male vegans think of stereotype conceptions about vegans?I will come to the conclusion that male vegans think that eating meat, as well as drinking beer, is one part of the social construction of masculinities. Male vegans are aware of norms in the surroundings and the strong attachment of meat normativity in the western culture.

Byggsektorn står för en stor del av de emissioner som påverkar klimatet negativt. Byggmaterial baserade på trä påverkar den globala miljön mindre negativt jämfört med alternativa byggmaterial som betong. Trähusindustrin kan därför anses ta ett miljömässigt ansvar eftersom deras produkter har en lägre klimatpåverkan, vilket bidrar till att minska byggsektorns totala miljöpåverkan. Informationen om träbyggandets klimatfördelar behöver också kommuniceras för att skapa möjligheter för kunden att göra miljömedvetna val vid köp av hus. Idag tenderar trähusindustrin att marknadsföra kostnadseffektiva fördelar i större utsträckning än miljömässiga sådana.

This report's aim is that by field measurements determine the function of Aprobo soundproofing material dB2 for reducing impact sounds, the measurements is done in ?the school for fine art? in Umeå also known as ?konstnärligt campus building nine?. The construction technique is used in areas sensitive to impact sound between different floors in the building. The measurement?s is also to do a function control of the buildings sound quality compared to Swedish and European standard when it comes to air sound, impact sound and reverberation time .

Abstract New methods, techniques and tools for the building industry are constantly being developed and improved and launched on the market. The problem in the building industry development is not that the products are not good enough. The problem is instead that the existing construction companies do not choose to use these innovations, instead they continue to employ the technologies they already possess and master. This leads to the fact that the construction industry is, in the public eye, beeing seen as a conservative industry. AquaVilla is a company that basically produces houseboats.

Our Bachelor´s Thesis has been performed in co-operation with Bors Automation & Tool AB.Our task was to develop a servomotor powered tube cutting-machine with initial point fromtoday's hydraulic driven tube cutting machine Bors HYD 23. The purpose with the newconstruction was to achieve a more power-efficient tube cutting machine which could lowerthe power consumption, and also meet the market continued growing demand forenvironmental-conscious production.Bors Automation & Tool gave us relatively free hands in order to enable new thinking ideaswithout following their traditional constructional solutions.Our solution resulted in a construction based on a power source existing of a servomotordrivenrollerscrew, witch provides a more rational use of energy compared with the currentmethod.Bors Automation & Tool AB has decided to fabricate a prototype of Bors E 23 during theautumn of 2007, which they are planning to revile at the Tube 2008 exhibition in Düsseldorf,Germany.NOTE:Due to an agreement signed by the authors in the beginning of this project, no appendix is published at this time.If you want to wiew these documents, please contact the authors..

This diploma work addresses the question of how much energy is spent whenmanufacturing the components of a building as well as of how much energy is used inthe production of a building. The object of the studies is BioCentrum at the SwedishUniversity of Agricultural Sciences in Ultuna just outside the city of Uppsala. The aimof the work was to investigate how much energy was consumed when manufacturingand production in relation to the management, how many years the production wasrepresented. It was also a study in how mature the construction industry is to answerhow much energy was consumed in manufacturing.In order to get these answers a question form was developed and sent to thesuppliers to BioCentrum. In this form they were to respond to the quantity suppliedto BioCentrum and the amount of energy was spent when manufacturing thecomponents.