In the west part of Trelleborg, on previous farmland a new society is under construction. It is situated right next to the ocean and close to the European freeway. Eight types of villages, all with different kind of architecture will be built in the area, one of them is Torns Village built by Skanska and Ikea. A concept called BoKlok. This specific village consists of twelve houses and five apartment buildings. They are all somewhat classical in their appearance with wooden panel, but at the same time they have a modern touch.

In recent years it has become more and more evident that man has contributed to much of the climate changes that have taken place during the last century. A major challenge today is to reduce emissions and energy usage at the same time as the global population is growing. To contribute to a better environment, Stockholms Stad has set at target of becoming fossil fuel free by the year of 2050. The construction of new districts is done with this goal in mind; energy efficiency and renewable energy sources are examples of methods to achieve this.Solar energy is considered to be a sustainable energy source and the most common techniques to harvest solar energy in Sweden are solar cells and solar collectors which produce electricity and heat respectively. This report aims to investigate whether an investment in any of these systems would prove to be economically beneficial at Kvarnholmen, a district under construction in eastern Nacka, Stockholm.Since the finished blueprints only cover a small portion of Kvarnholmen, the report examines the possibilities for a house where construction has already begun, Nya Kvarnen.

Abstract Background: Families with sick children are expressing the needs of accommodation near the hospital, in order to be close to their children and be together as a family.Aim: To investigate how parents experienced the hospitality and the environment at the Ronald McDonald House (RMH) in Uppsala and how they feel their children have experienced the stay.Method: Descriptive qualitative interview study. Five parents who lived with their family at RMH between 2013- 2014 have been interviewed with a semi-structured approach. A qualitative content analysis with an inductive approach according to Graneheim and Lundman (2003) was conducted on a manifest level.Results: RMH made the families? situation easier. RMH met their needs of a homelike environment where they could be themselves; be together and maintain everyday routines.

The purpose of this study was to examine how youth useFacebook and how Facebook perceives construct their own identity. Anotherquestion was if the construction of the self-identity is different between thegenders.The study is based on empirical material that has been collected by usingquestionnaires. The questionnaire was handed out in three different classes in3rd grade in secondary school in southern Sweden. The analysis in this studywas based on two different kinds of theories, Erving Goffman?s social theory ofdramaturgical analysis and stigma and Yvonne Hirdman?s gender studies.

This study focuses on single peoples construction of their lifes in relation to normative heterosexual coupledom. It is based on five interviews made with single women and men at the age of 24 to 51 who live by themselves. The queer theory which puts the heteronormativity in question is used as a theoretical framework. Discourse psychology functions as an analytic approach. It focuses on the use of language in the construction of reality in a world of determinant discourses.

My Finnish grandfather had a passion for architecture, eventhough he wasn?t an architect. In the end of the 1950s he builta wooden summerhouse on a lot outside of a small villagecalled Lempäälä, close to the city of Tampere. Today the lotbelongs to my mother. Every time I visit our summerhouse, itmakes me want to do as my grandfather did ? to build a smallhouse next to it.My project is a proposal for a wooden house on mymothers lot.

Background: The strategic importance of purchasing departments is increasing, yet supply risks are rather uncharted. The procurement of coffee involves supply risks and the purchaser needs to be able to handle these to enable the roasting-house to produce coffee as specified. Purpose: To chart risks in connection with the procurement of coffee as well as the possibilities of handling these. The thesis also examines if general risk management theories are applicable on the supply risk present within Swedish roasting-houses and can become an integral partof the purchasing process. Method: A qualitative case study of the purchasing process of Swedish roasting- houses.

Understanding how innovation and renewal occurs in an industry is important for how to manage technical development for individual companies. It is also important for creating a beneficial industrial context for renewal, from both a political and an industrial perspective, in which new solutions can arise and spread through the involvement of several actors of the industry. How innovation and renewal occurs in the construction industry in Sweden is however viewed differently. One challenge that has been pointed to is that most of the work performed in the construction industry is organized in projects, which in turn should affect how innovation and renewal can be achieved. The aim of this thesis is to provide an understanding of how the project organizing in the industry affects innovation and renewal. This is executed through a case study of the construction of Skandionkliniken, a proton therapy clinic, and by using an industrial network theory that challenges the traditional view of how innovation is achieved.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

There are problems with poor quality, poor scheduling and poor working climate in the Swedish construction industry. Many parts have been involved, trying to solve the problem.This spring a new planning and building-law becomes final. In this law, the requirements set on the controls are greater. Hopefully this will lead to fewer construction errors. The requirements set on the working environment have also increased, forcing consultants and contractors to focus on safe workplaces.For each project requiring a building permit, an inspection plan has to been drawn.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

Mapping a process enables a greater understanding of the work, and is standard to evaluate and improve a process. This thesis is conducted at Test Bed Mechanical Design at Scania in Södertälje. Test Bed Construction is a complex process, characterized by a large amount of creative work, technical challenges and coordination between different people and different organizational functions.The aim of the thesis was to identify the Test Bed Construction Process and to develop a visual model of the workflow that also served as support for the engineers in their daily work. During the mapping process, comparisons were made with previous research in lean product development to identify process improvement.A literature review on process mapping and process visualisation resulted in a method for process mapping. The study showed that research on process visualisation is neither structured nor well defined.

High housing- and construction costs is a fact in Sweden today. Prices on building materials more rapidly than producer price index for industrial goods. Prices tend to rise during market boom but does not adapt during diminishing demand. The effects of fading demand can rather be deduced through discounts and quotations. During 1992-1998 when the Swedish construction sector found it self in severe crisis the prices of construction materials kept rising more rapidly than PPI for industrial merchandise.

BIM has been a trend in recent years when it comes to design and construction ofnew buildings. However, there has been less talk about what happens to BIM modelsafter the construction phase.This issue has been raised at the Forsmark construction documentation department.This thesis aims to look at how the information in a BIM model can be transferred tofacility management and GIS systems and thus add value, even after the constructionphase.Questions raises how such an exchange might look like and whether it is reliable.How should a claim be brought to planners for such an exchange to work.This thesis tested some of the most common methods for this kind of exchange ofinformation from BIM models to facility management and GIS. It was formats like IFC,Fi2xml and a database connectivity that was analyzed by a computer simulation of amodel provided by Forsmark. The model consisted of an existing office building atForsmark, modeled in Autodesk Revit.The results indicate that the formats tested require a precise plotting of the models.The loss of information that came to light in the simulation could be attributed tofailure modeling in Revit. Even such things as naming of areas must be consistent.

The graduation essay has been carried out in co-operation with Kalmar Industries in Lidhult, Sweden. The purpose of our essay was to develop a complete construction solution on a hoist that could lift a laying wheel, lift it up and then turn it 90 degrees. After that the wheel shall be placed in a special holder.The background of the essay is a record of reports of damage wheels when they been incorrect lifted with a forklift. The hoist shall be used together with the same forklifts that manage the wheels today. Together with our instructor at Kalmar Industries we developed a requirement specification and from that we got free hands.However this was not the main task from the beginning, then a simular hoist should be develop but used directly in the assembly workshop without using a forklift.We started to find principle solutions that later was evaluated against the requirement specification.