Sökresultat:
8947 Uppsatser om Blue Drive System - Sida 8 av 597
Hjälpkraftsystem med två lågspänningsnivåer
Because of increasing demand of power on Malmbanan the capacity of the existing wires which supply the trains must be increased. This increases the stress on the existing poles and for this reason the system for supplying the loads along the railway is to be removed from the poles and be replaced by some other system. This thesis is a study on a two-level low voltage (1 kV and 0.4 kV) electrical system with the aim to investigate if it can be an alternative to the system used today taking into account the voltages, fault currents and costs.In this thesis the following tasks have been performed:? Gathering of data? Description of basic theory? Loadow and fault current calculations of the system with MATLAB? Life Cycle Cost estimate of the system? Analysis and conclusions from the resultsThe results show that the new system can be an alternative to replace today's system. The simulations and calculations show that the voltage drop is at an acceptable level and that the fault currents are large enough to supply a safe disconnection if a fault occurs at the far end of the system..
Business intelligence : Framgångsfaktorer vid användningen av ett BI system
The management of information is a significant competitiveness in companies. Companies stored and save information every day, and it is very common to save de information in different sources. This makes de management of information complex. To mange, monitor and analyze the information, companies can use a system called Business Intelligence. BI system is an analytical system that extracts and converts data into useful information that helps employees to make informed decisions.
The Future of ABC at Sandvik Tooling
Abstract Title: The Future of ABC at Sandvik Tooling ? Incorporating ABC with information systems in order to drive business development from a cost point of view. Authors: Jenny Andersson and Camilla Salomonsson. Supervisor: Charlotta Johnsson ? Department of Automatic Control, Lund University.
Dags att förändra den svenska utnämningspolitiken! En idéanalys
This paper discuss the possibilities to improve the Swedish political nomination system. It brings up some of the values and norms that can be used to change the existing system. Values as openness, the demand of responsibility and also if there is values from the American spoils system that can be used in the Swedish system. A minor purpose is to discuss the part of the parliament within the nomination process. To investigate this I have some theoretical starting points and a self constructed analysis tool.
Förändring = Förbättring? : En studie av hur några användare skattar och upplever förändringar i ett datorstöd
Human-computer interaction is central for computer assisted development. The aim was to investigate the user experience of a new (U2) compared to an old (U1) computer system, within a cognitive psychology frame of reference. Six subjects, frequently using the system, participated in the study. It was shown that the new (U2) compared to the old system (U1) enhanced and supported more the users? system related procedures/tasks.
Vad påverkar folkbibliotekens inköp av skönlitteratur för vuxna ? en jämförande studie av ett svenskt folkbibliotek och dess engelska motsvarighet
The purpose of this bachelor thesis is to do a comparativecase study between a public library in Sweden and one in England. Our aim is to examine what factors affect alibrarian in charge of purchasing fiction for adults and to what degree. We have used two methods of study, specifically semi-constructed interviews with two librarians and text analysis of policies in place at each library respectively. Our research questions share the above mentioned context and should therefore be read with that backdrop:-How is selection and purchase covered in the policies?-What selection criteria are used by the respondents?-What differences are there regarding the decision making? -How can the viewpoints be explained?Our analytical framework was based on three arguments namely market demand, quality and social inclusion when examining our material.
Varför svänger stenen? : En studie i curlingens komplexa tribosystem
The tribo system ice-curling stone was investigated in order to understand the mechanisms behind the stones' behavior on the ice sheet. The problem with non-identical stones should also be addressed.The stone curls, that is, its sliding path deviates from a straight line to the right for a clock-wise rotation and to the left for a anti-clock-wise rotation. Several mechanisms to explain this behavior have been proposed over the years but none has been successful.By carrying out experiments at the local curling rink and studying silicon castings of ice- and stone-surfaces with scanning electron microscopy and vertical scanning interferometry, it has been decided that the curl is not due to dry friction, ice-debris or the difference in friction on the left and right side of the stone. The side force comes from the fact that the friction is higher at the back of the stone than at the front.The contact between stone and ice is never completely dry, nor in the hydrodynamic lubrication regime. It is probably a combination of hydrodynamic lubrication and a contribution from mechanical scratching of the ice.
Ett mät- och reglersystem för temperaturkompensering
An automatic control system for calibration of pressure indicators has been constructed. This control system can be used as a complement to the calibration system located at AerotechTelub, division MainPartner, in Linköping. The calibration system used today contains some not wanted pressure changes, which is compensated by hand today. The new system presented in this report automates the calibrating process and simplifies the calibration. Suitable hardware as motor, controls card and so on have been found and software in the form of Visual Basic program has been developed.
Effektivare produktionsarbete med BIM som arbetssätt på Skanska Väg och Anläggning region Stockholm
The author of this report has created a Web-based invoice system and CRM at therequest of the company Webhouse.se. The purpose of the System is to makeeveryday tasks in the company easier. The system also needed to prevent mistakesand errors by managing orders and invoices.The system has been created with the company?s requests in focus. During thedevelopment of the system information security and interaction design have beenimportant aspects that have been taken into consideration.The system has been created using techniques such as PHP and MYSQL.
Resurssnålt kommunikationsprotokoll för små inbyggda system
Web Services har vuxit i popularitet de senast åren. Användningen av inbyggda systemökar också ständigt, och möjligheten att göra inbyggda system tillgängliga via Web Services öppnar nya möjligheter.Detta arbete visar på möjligheter och problem med standardiserade textbaserade protokoll för kommunikation i inbyggda system med små resurser. XML-RPC och SOAP studeras ur detta perspektiv. SOAP befinns vara mer komplext att implementera stöd för än XMLRPC i den begränsade testmiljön, som har 32kB internminne. XML-RPC visar sig ge fördelar över proprietära protokoll främst när det gäller underhållbarhet och återanvändbarhet..
Materialhantering och alternativa förpackningslösningar : En studie vid GETRAG All Wheel Drive AB
Köpingsföretaget GETRAG All Wheel Drive AB utvecklar, tillverkar och levererar komponenter för drivteknik till personbilsindustrin. Genom projektet 580-9 planerar företaget att införa en monteringsbana för en nyutvecklad produkt. Till denna önskar företaget skapa en materialhantering som är kostnadseffektiv, lever upp till kundernas krav på hög kvalitet samt utesluter hantering av träemballage vid monteringsbanan. Syftet med examensarbetet är därför att ge förslag till en kostnadseffektiv materialhantering där emballage som avger restprodukter inte hanteras vid monteringsbanan.För att undersöka examensarbetets frågeställningar har vi utrett hur materialförsörjningen till banan bör skötas. Studien bygger främst på teorier om lean produktion och förpackningslogistik.
Driftsäkerhet i verksamhetskritiska system
Vi har undersökt ett verksamhetskritiskt system i en större organisation för att se hur systemet är konstruerat och hur förvaltningsarbetet bedrivs för att undvika avbrott i systemet. Då det är särskilt viktigt att dessa system har hög tillgänglighet har vi försökt lyfta fram faktorer som visat sig vara särskilt viktiga för att uppnå hög tillgänglighet. Undersökningen har genomförts som en fallstudie där vi intervjuat personer med olika befattningar inom organisationen. Vi presenterar även ett antal rekommendationer som vi tror kan minska risken för avbrott i det undersökta systemet..
Students balancing human capital through scorecard - a study of non-profit organizations
PURPOSE: By analysing collected data using theory, we aim to interpret the design, implementation and the usage of BSC in NPO?s to be able to contribute to the research. METHODOLOGY: A case study design has been made through semi-structured interviews and backed up by a quantitative survey and internal documents. THEORETICAL PERSPECTIVES: Based on the sources given from the creators of the scorecard together with some sceptics and some followers, we have outlined the bases of balanced scorecard. To map out the non-profit sector and its strategic needs, the theories have tried to settle the specific need for the strategic tool given.
Implementation av ett Content Management System
Under de senaste åren har webbplatser blivit allt mer komplexa och informationen som ska visas och hanteras allt större. För att underlätta hantering och administration av dessa system har många CMS-system vuxit fram. Dessa system kan skilja sig mycket beträffande pris och funktionalitet, allt från mindre open source system till stora komplexa kommersiellt drivna system. Detta arbete bygger på att skräddarsy ett CMS-system för administration och hantering av innehåll på diverse artist sidor, som hanteras av ett medieföretag. Systemet använder tekniker som JavaScript, PHP, MySQL som grund för dess uppbyggnad.
Övervakning för DC-system
Examensarbete har utförts för AIAB DC Systems i Karlstad.Vår uppgift gick ut på att göra ett övervakningssystem för DC-system. Enheten skall användas för att övervaka isolerade DC-system avseende spänningsnivåer och isolation samt larma vid fel. Tidigare har man haft ett analogt system ute på marknaden men nu vill man ha ett digitalt processorbaserat system.Vi har använt oss av en 8-bitars RISC-processor. Programmeringen har gjorts i assembler med hjälp av ett utvecklings-kit och sköter logiken för övervakningen. Programmet manövreras med två tryckknappar och en display.Programmet vi har tagit fram behöver kompletteras med vissa funktioner.