A patient simulator for testing anaesthesia machines has been developed at Maquet Critical Care AB, to reduce costly and time-consuming experiments on animals. The device simulates human lungs regarding lung dynamics and volume, uptake of anaesthetic agents and the production of carbon dioxide, heat and moisture. Further demands on the simulator are durability and size; the device shall be compact enough to be moveable.The resulting simulator fulfils the requirements and enables better repeatability and ability to test extreme cases than experiments on animals do.Uptake of the anaesthetic agent is achieved in a active carbon filter and controlled by regulating the flow. The flow is created by a regenerative blower and controlled using a proportional valve. The uptake can be set by the user or by a simple uptake model modified to recursively handle changes in the concentration of anaesthetic agent.Carbon dioxide is fed into the system from a tank by a mass flow regulator.

AbstractFor several years, the organic food sales have increased, and more are choosing to buyorganic food of more diverse causes. Unfortunately the sales have slowed down the past year,a lot depends on the Swedish economy has been in decline and it has led to more will checkone more time on the price. But even if the sale value has decreased, the amount of organicfood has increased, it is because many stores have their own organic brands and they can pushprices down.The internet has become a great help in our daily lives, we do most our business via theInternet. But now we are not just paying our bills through the Internet anymore, we shopclothes, movies, music and books too. E-commerce was become more serious last decade andhas grown every year that has passed.

I denna rapport beskrivs en utvecklad utbildningssimulator o?ver spa?rfordon och dess del- komponenter pa? ja?rnva?gen. Simulatorn a?r en ha?rdvarubaserad prototyp o?ver ett do?rrsystem pa? spa?rfordon. Prototypen ska anva?ndas av systemspecialister och tekniker inom ja?rnva?gs- branschen.

AbstractFor several years, the organic food sales have increased, and more are choosing to buyorganic food of more diverse causes. Unfortunately the sales have slowed down the past year,a lot depends on the Swedish economy has been in decline and it has led to more will checkone more time on the price. But even if the sale value has decreased, the amount of organicfood has increased, it is because many stores have their own organic brands and they can pushprices down.The internet has become a great help in our daily lives, we do most our business via theInternet. But now we are not just paying our bills through the Internet anymore, we shopclothes, movies, music and books too. E-commerce was become more serious last decade andhas grown every year that has passed.

Idag fokuserar företag mer och mer på att energieffektivisera sina verksamheter då det finns både ekonomiska och miljömässiga vinster i detta. För att minska energiförbrukningen i samhället är det bra att börja med dess infrastruktur. För att funktionen hos ett avloppsreningsverk ska vara god samtidigt som energikostnaderna hålls nere är bland annat valet av rätt pumpar och blåsmaskiner för den aktuella driftsituationen av största vikt. Att hitta balansen mellan funktion och energieffektivitet hos en kombination av maskiner är dock ett tidskrävande arbete. Genom två fallstudier och matematisk modellering var syftet med detta examensarbete att bestämma huruvida det är möjligt att grovt uppskatta livscykelkostnaden hos olika kombinationer av pumpar och blåsmaskiner i varierande driftsituationer.

Sometimes relatives have taken me on one side and told me they cannot bear it any more:"Isn't there something you can do to end it all?"More often requests for euthanasia have come from those who are ill. I remember visiting a man with lung cancer. He asked his wife to leave the room. As she closed the door he leaned over and grabbed my arm.

Public participation is a key aspect in the planning of Swedish municipalities. It is probably the most important tool of them all in the planning towards a sustainable future within the cities and the municipalities as a whole. Participation from the public can take on several different forms. In this paper I focus to research and discuss in and around the usage of a web-based 3D platform called City Planner. The tool allows the user (the public) to view the municipalities planning in a fairly new (but quickly growing) environment.

Bakgrund: Flera studier beskriver vikten av att minimera dörröppningsfrekvensen på operationssalarna. Högre frekvens av dörröppningar leder till försämrad ventilation på operationssalen, vilket i sin tur kan leda till vårdrelaterade infektioner.Syfte: Syftet med denna studie var att på en operationsavdelning observera frekvensen av dörröppningar under pågående operation, varför och av vem de öppnades.Metod: Metoden var en kvantitativ deskriptiv observationsstudie med tvärsnittsdesign. Personalen på en operationsavdelning i Mellansverige observerades under pågående operationer. Observationerna utfördes sex vardagar i januari 2013 och valdes från operationsprogrammet.Resultat och slutsats: 22 observationstillfällen observerades, 11 från vardera konventionell respektive infektionskänslig kirurgi. Studien visade att dörröppningsfrekvensen var högre vid konventionell kirurgi jämfört med infektionskänslig.

In a world obsessed with the visual our homes have gone viral. Through the frame of Instagram family members seems switched to furnitures and the so-called smartphone surely opened the door to new, digital places. Social media has become part of the life of many and, as an effect, also of the way we do our homes. In the era of digitalization, the concept of sharing has gotten some new dimensions where the borders of private and public, here and there, becomes blurred. Why do people post pictures of their homes on Instagram? How is it performed and what boundaries are pushed in the process? These have been some of the main topics guiding this thesis.

The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.

The company Bergteamet, Boliden, Sweden, is installing ventilation shafts of the Garpenberg mine. For such work a platform is needed which you can stand on and work from. The Shaft Reinforcement Team at Bergteamet performs the installation work and is the sponsor of the platform. The project described in this report is performed at the department MEC, Mining Equipment Construction, which has been given the task to design and construct the platform, customized for the current shaft. After this the platform is manufactured and inspected at the workshop at Bergteamet.The design work was carried out as follows:- After an initial meeting a requirement specification was worked out, describing the problem and previous experiences of platforms and requirements for the design and equipment.- A concept sketch was developed with consideration of surrounding factors.- A constructed 3D model was presented along with the choice of materials.

The division of Engineering Materials at Linköping University, department of Management and Engineering, conducted a research project concerning Fatigue life of thermal barrier coatings during 2009. During this project equipment to provoke these fatigue failure by rapidly heating and cooling test subjects in cycles, was ordered.Design and manufacturing of the equipment was handled internally at LIU.The equipment was built using a furnace that is lowered and raised over the table where the test subject is placed. To keep the temperature of the furnace a lid slides in place to close the downward facing opening of the furnace when it is in the raised position. On this door there is nozzle that is used to cooling of the test subject by air.To make sure that the equipment can work independently you need an automation controller that can evaluate if movement can occur without danger of collisions. The control system also needs to monitor that all elements are performed according to plan.This degree project is based on a modular system from OPTO 22 and includes the configuration of a PLC that will be supplied with logic and a user interface.The degree project resulted in a graphic interface in which a user can set desired values for different parameters and get information about current values for them.

This thesis investigated the possibilities to resume cultivation of an old manor house built of timber and what this would mean from an energy and moisture perspective. The building in this case study is named Sofiedals mansion and was built in 1858 in Valbo 11 kilometers west of Gävle.The structure of the house was documented and used as a starting-point for carrying out calculations focused on energy and moisture aspects. With the help of a number of computer programs and a conducted air tightness test, the buildings energy consumption were calculated and compared with the current building regulations.In addition, the building was analyzed considering energy retrofitting and what it meant for moisture problems. The energy retrofitting consisted of additional insulation, decreasing the buildings permeability through air sealing; window and door replacements. When a building is equipped with natural ventilation it is difficult to know its precise performance and how an energy retrofitting affects it.

This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde, first semester 2007. The assigner was Tibrokök in Tibro, Sweden. The commission was originally to design a sliding door concept for kitchen. Later it was expanded to also include bathrooms.During the feasibility study of the project Internet was used as an information source. Kitchen brochures and magazines were ordered from different companies to give inspiration and ideas.

Zakrisdal and the west coast region of Karlstad was at one time a protected area where the ammunition factory AmF Zakrisdal 1941-1994 was situated. This factory manufactured explosives for the Swedish armed forces and for export. In this context it is an interesting paradox that the production of ammunition, mines and armorpiercing grenades for more than 50 years has preserved the environment surrounding the factory.The factory is now gone and the production is moved to Karlskoga. Plans are being made to build housing for 3-4000 residents and other enterprises within the area. The area now stands before yet another change, most likely the most profound to date.The inspiration for this work comes from the economic historic Jan Jörnmark.