In 1994 a new Forestry Act was accepted in Sweden. One of the aims of the law is to raise consideration forpreservation of biodiversity. Since the new law got accepted and some time has passed, there now lie someinterest in examining whether the law has been effective towards its purpose. Methods suitable for analysishave been examined during this study. The content of this pilot study is based around five parameters whichcan be used to validate the effects of the new law.

We have through our theoretical framework been able to create a simplified measuring tool for a KIZ; the S-TKL. We have found that the S-TKL is possible to implement on the Öresund Region but with some flaws. Even though the Öresund Region has implemented the mindset of a KIZ, accurate statistics are in some areas hard to find. We can also through our empirical findings say that it is difficult to use the S-TKL on Shenzhen. The data we have found gives a good indication of both of the regions.

This report is a bachelor thesis presented at the department of Computer Science andEngineering at Chalmers University of Technology. The aim for the project is to find a simplemethod to measure and display physical quantities in a three dimensional room.The report describes a method to construct a system for measuring differentphysical quantities via sensors. The system must be built in a modular and expandable way tobe adaptable to different tasks.The system explained in the report consists of two parts;A physical scanner with moveable probes for carrying sensors and a microcontroller forcontrolling the probes and communicating with the next part.An application written in Java for storing the measured values and presenting them in a lucidperspective.It is possible to construct the scanner with different designs and circuitry, with multiplexers andflip-flops, to ensure that an unspecified number of probes can be added to the system and thatthey can be operated simultaneously.The Java application is written in a modular way, using a design pattern that separates eachindividual part of the application. It contains exceptions and interfaces that ensure a safe andexpandable application..

Today?s electrical grid companies understand that better knowledge of and information about their grid can help realize a smart grid network. One way to gain better knowledge and information about the low voltage network is to install measuring equipment on the substation transformer´s secondary low voltage side that measures the low voltage network losses for that specific substation. By doing so, grid companies can, due to the calculation of the low voltage network losses, identify and address issues such as illegal power dissipation, unmeasured power outtakes, and unsatisfied technical documentation for the substations low voltage network.During 2012, Mälarenergi Elnät AB had a total electrical network loss (both medium and low voltage network losses included) of three to four percent of their total distributed electrical volume. Converting this energy volume into a monetary figure this accounts for a loss of around 30 million Swedish crowns.

Previous research on Twitter use among nonprofit organizations has been centered on the US, thisessay Nonprofits on Twitter: a content analysis of Swedish nonprofits working for gender equalityseeks to expand that research to include nonprofit organizations operating in Sweden. By studying tenSwedish nonprofits all working to achieve gender equality this study can begin filling a gap in theexisting research. Focusing on both what kind of messages the organizations publish, and what kind ofmessages engage the organizations? followers. This is achieved by quantitative content analysis:categorizing messages into the categories Information, Community and Action, and measuring whichof these categories got the most shares, comments and likes.

The main purpose of this thesis has been to find a way to evaluate the soil parameters for the Total sounding method (TS), such as the inner friction angles and settlement modules. This study only includes an analysis of soil profiles from the Stockholm region. The chosen location for the study is a proposed residential area east of Igelstaviken in Södertälje. Presently, the subject plot is located in a residential area and is also adjacent to a school area.Total sounding is originally a Norwegian soil testing method. The differences between the sounding methods (weight-, ram-, CPT-sounding) are for instance how the sound is driven into the ground and what kind of parameters that are registered.

Marks do not only work as an acknowledge of the effort that has been made under a long period of time, but also as a receipt for eligibility to further studies. Within the political debate, marks have often caused a big discussion among the political parties. That is due to the obvious difference between the political parties on the left, and their counterparts on the right. However, there is one thing that they all have in common. Everyone of them have plans of measure within their political agenda, regarding the use of marks.The aim of this study has been to try to understand the way pupils think about marks.

This report is a bachelor thesis presented at the department of Computer Science andEngineering at Chalmers University of Technology. The aim for the project is to find a simplemethod to measure and display physical quantities in a three dimensional room.The report describes a method to construct a system for measuring differentphysical quantities via sensors. The system must be built in a modular and expandable way tobe adaptable to different tasks.The system explained in the report consists of two parts;A physical scanner with moveable probes for carrying sensors and a microcontroller forcontrolling the probes and communicating with the next part.An application written in Java for storing the measured values and presenting them in a lucidperspective.It is possible to construct the scanner with different designs and circuitry, with multiplexers andflip-flops, to ensure that an unspecified number of probes can be added to the system and thatthey can be operated simultaneously.The Java application is written in a modular way, using a design pattern that separates eachindividual part of the application. It contains exceptions and interfaces that ensure a safe andexpandable application..

At Volvo Cars Torslanda's paint shop there is a requirement to in a fast and effective way get an overview of the plants capacity. Therefore a capacity template was constructed as a tool for the engineers at Volvo several years ago. This template has during the years become complicated and outdated. Thus this thesis work will resort as a new capacity template, built from scratch. The new template has been built up based on requirements from Volvo and the concept of OEE (Overall Equipment Effectiveness).

Abstract Title: A conjoint analysis of packaging attributes. How can the attributes of a product?s packaging best look like to attract the consumer? Authors: Linda Granberg & Helena Niklasson Supervisor: Jan Svanberg Department: School of Management, Blekinge Institute of Technology Course: Bachelor?s thesis in Business Administration, 15 credits Purpose: The purpose is to find out how visual and technical attributes on product packaging affects the consumers tendency to want to buy the product. Method: Conjoint analysis and a quantitative survey. Results: When developing a package for a food product we?ve reached the conclusion that it is most important to have clear product information on it.

This report is the result of a master thesis at the Department of Mechanical Engineering, Division of Industrial and Economical Development, at Linköping University of Technology. The project was carried out on behalf of Fanerami AB, Mjölby and includes 20 weeks of full time schedule work.Cabinets with vertical mounted roller shutters all share the same problem, namely weight balancing. A roller shutter has an equilibrium area where the sum of the different forces acting on the shutter equals zero. As the shutter leaves that area it will pick up speed as it falls towards the bottom. When the shutter hits the bottom of the cabinet there is a potential risk of getting fingers caught and in this project a solution to prevent this from happening was to be presented.In this project, three concepts have been generated with the following different purposes:?In concept 1 the risk of getting any fingers caught when the shutter closes was to be eliminated in an efficient and inexpensive way.?In concept 2 the roller shutter had to be balanced at all time providing the possibility to keep the cabinet open in any position.?The last and most challenging task was to create a remote controlled TV cabinet.

Hofstede constructed a culture dimension called Power Distance, measuring the inequality of Power. Germany and Sweden have relatively similar values according to his world-renowned research. But a series of interviews of Swedish entrepreneurs in Germany shows that these perceive a large difference in inequality of power in the two countries. This essay seeks to explain the difference between these subjective-qualitative experiences and the objective-quantitative data of Hofstedes Power Distance Index. We propose that a combination of differences in communication, exercise and visibility of power and formality influence the way Power Distance is perceived.

Laminitis is a common but devastating condition, and affected horses are often euthanized or influenced a very long time. Many horses never return to their original capacity. Laminitis is often associated with severe pain and a long time of convalescence. Symthoms includes lameness, hoof hyperthermia, strenghthened digital pulse and pain. The horse often tries to move the body weight away from the forelegs which are often more severly affected than the hindlimbs.

?Mechanical debridment ? A studie in irrigation optimization? is a final thesis which was executed by Fredrick Ekman, in close collaboration with the other group member Mikael Johansson, during the spring 2012. The thesis was carried out through Karlstad University Faculty of Technology and Science in the study program of Innovation and Design Engineering (180 ECTS credits). The client of the project was Medilink AB located in Lindesberg, and the contact person was Nils-Erik Söderström, Chief Executive Officer. The project was supervised by lecturer, Lennart Wihk, and examined by lecturer and professor Fredrik Thuvander at Karlstad University.

Starting at the end of the Cold War, this publication assesses the impact of the upheavals in Eastern Europe and the atrophic Soviet Union on the Swedish doctrine of neutrality with its 200 year old tradition. Since the end of world war two the proximity of the Soviet Union had constituted the major impetus for upholding a position of neutrality and as this vanished a pressure for change was created. This essay works with a theoretical framework delineated by Kjell Goldmann and under this disposition, the Swedish tradition of neutrality, governmental positions, opposition and four major influential newspapers are studied. The standings of each variable are canvassed in an attempt to explain the development of Swedish security policy during the crucial years of 1988-1992..