This thesis has been done at the powder department (GH) at AB Sandvik Coromant in Gimo. With a rheometer measurements has been made on raw materials and powder blends. The focus of this report has been to find correlations between raw material powders and press data, comparisons have also been made between raw materials and powder blends.The rheometer can show information of how a powder act in flow conditions, together with air and with pressure. Analyses has been done comparing the rheometer data with press parameters (for example: rejected orders, weight variations and the compaction pressure) with the goal to find correlations between the powders flow properties and the powders compaction in production.The measurements and analyses have been showing that the powder flow properties depends on the powders composition and that properties like flow rate, aeration and permeability varies between powder blends and batches of the same powder sort. It seems to exist a correlation between the pressure force and the flow rate of a raw material.

Since July 2005 the major companies listed on the Swedish stock exchanges are required to apply the Swedish Code of Corporate Governance. The code states that companies shall have a nomination committee responsible for nominating new board candidates and seek to obtain gender equality in the Board of Directors. This paper examines the trend of board as well as nomination committee composition among Sweden's 60 largest publicly traded companies between 2005 and 2008. Our overall finding is that neither the board nor the nomination committee composition has changed to a notable extent during the period and that the share of newly appointed female board members has actually decreased. However, the trends vary between different sectors.

Strong relationships are something that is really important for companies to succeed with, in purpose to increase and protect their market shares. After major research on the subject, it has been found that variables like exchange of relationship, trust, control mutability, satisfaction and commitment are important in the establishment of measuring a relationship. The purpose with this thesis was to: increase the knowledge on how companies measure, and then consequently evaluate, their relationships. To answer the purpose of the study we chose to do a case study at Stadium AB, which is a retailing concern with a high level of customer contact on a daily basis. The conclusion is that trust most likely is the key variable in measuring relationships.

The Rya power plant in Borås produces district heating, district cooling and electricity. The plant is owned by Borås Energi och Miljö AB and is run by Dalkia Facility Management AB.In order to get the best heat exchange from the district hot water a pair of twin pumps and a turbine circuit pump are used as return pumps. Turbine circuit pumps are used to increase the pressure through the heat exchangers at the power plant. The pumps are in use when the flow is over 2 000 m3 h-1 and during the summer when re-cooling is used to improve the effectivens of the heat boilers.Since the pumps, that are parallel connected, rotating at a fixed rate per minute, the pressure is regulated with regulating valves. This report shows that during the 4,300 hours that the pumps where in use, energy corresponding to 590 MWh was wasted.

This thesis has been done at the powder department (GH) at AB Sandvik Coromant in Gimo. With a rheometer measurements has been made on raw materials and powder blends. The focus of this report has been to find correlations between raw material powders and press data, comparisons have also been made between raw materials and powder blends.The rheometer can show information of how a powder act in flow conditions, together with air and with pressure. Analyses has been done comparing the rheometer data with press parameters (for example: rejected orders, weight variations and the compaction pressure) with the goal to find correlations between the powders flow properties and the powders compaction in production.The measurements and analyses have been showing that the powder flow properties depends on the powders composition and that properties like flow rate, aeration and permeability varies between powder blends and batches of the same powder sort. It seems to exist a correlation between the pressure force and the flow rate of a raw material.

Twitching is frequently used in horse management because of its sedating and pain-relieving effects. In this study, the effects on the horse?s nervous system by twitching were investigated by thermography of the skin temperature. The temperature is regulated by the sympathetic nervous system through postganglionic sfincters at the capillaries of the skin. The effects on the endocrine activity have also been studied by the measuring of ACTH and cortisol in blood plasma.

In this essay, I investigate Swedish possibilities to influence the Common Agricultural Policy of the European Union (CAP). After having summarized my findings, I try to explain the structure of influence by using Multi-level governance theory.Ten years have passed since Sweden joined the Union, and many changes have followed in the agricultural sector. By investigating the small country of Sweden's possibilities to influence CAP, I hope to be able to get a notion of the possibilities to influence the EU in general. The essay examines four possible paths for agricultural interests to influence the policy process in Brussels:* Through elected representatives of Sweden in the European Parliament, the Council of Ministers and in the Swedish Parliament* Through subnational institutions, such as the local authorities and regional representatives.* Through the Swedish Agricultural Office* Through the Swedish pressure group within the agricultural area, LRFThese four groups all have very different channels to the policy process on agricultural issues. The differences are mostly in terms of decisive power or advisory power and institutional contacts or lobby contacts.

Pyometra (chronic purulent uterine inflammation) is a common disease in middle-aged and older intact bitches. The disease most frequently occurs in metoestrus and previous research studies have shown that both hormones and bacteria are involved in the development of the disease. Analysis of the blood levels of prostaglandin metabolite 15-keto-13,14-dihydro-PGF2? (PG-metabolite) has previously been shown to be clinically useful in the differentiation of canine uterine diseases such as pyometra and mucometra. The PG-metabolite concentration has also been correlated to severity in pyometra as determined by hospitalisation length. The purpose of the present study was to investigate if blood levels of PG-metabolite can differentiate uterine diseases such as pyometra from other diseases in female dogs.

This thesis is performed at Saab Bofors Dynamics in Karlskoga and investigates a technique for ranging with laser pulses. The investigated technique is called Constant Fraction Detection (CFD). Described briefly, the received laser pulse is split into two equal parts, where one part is delayed half the pulse width and inverted. This signal is added to the original pulse. The resulting curve has the shape of a laying S and the detection of the zero level is used to stop the time measurement.

The use of a bit in the mouth of a horse is being increasingly questioned with respect to its actual function, and is sometimes judged an obsolete instrument of control with potential to injure the horse. The objective of the research presented herein was twofold; firstly, to investigate the actual pressure load in the mouth of the horse with regard to oral health issues, and, secondly, to investigate whether this could be a viable method to objectively measure strength exerted by a rider/driver to the mouth of the horse especially with regard to training regimes. From the results, it is evident that these newly developed sensors have a future in equine research, although they are still under development. They can be useful both as a pedagogic teaching instrument, providing instructor and pupil with instantaneous, objective feedback on the contact between hand and mouth, as well as an aid in measuring pressure loads from our common bits. .

In today's society there is tougher climate both financially and time wise. Accountants working under tight deadlines leading to the compromise between quality and quantity in the audit process and them therefor are being guilty of so-called reduced audit quality, RAQ. Reduced audit quality involves intentional actions designed to somehow reduce the evidence contained in the audit. We examine in this study the impact of time budget pressure (TBP), underreporting of time (URT), ethical organizational culture and charismatic leadership has on the frequency of RAQ.Previous research has already shown that there are clear links between TBP and RAQ, between URT and RAQ and between ethical culture in organizations and audit quality available. Five hypotheses were designed to the study.

Tissue factor (TF), a 47 kDa glycoprotein, is the initiator of the extrinsic pathway of blood coagulation and consequently of the upmost importance when damage to blood vessel occurs. The source of TF in circulation has been investigated. However, the source of TF is still not clear. One theory is that platelets express and increases the expression of TF after stimulation and the aim of our report was to investigate whether platelets really are a source for TF in circulation.Using specific primers for TF mRNA, platelets in plasma from healthy volunteers and from patients suffering from cardiac infarction were analyzed by using real-time polymerase chain reaction (PCR). Gel electrophoresis was performed after amplification of TF mRNA to verify the results.The samples were negative for TF when using real-time PCR and the few positive all had cycle threshold (Ct) values above 35.

This master thesis was a subtask of a project called EMIR-1. The goal with the thesis was tobuild a system for particulate mass measurements in one of the engine test cells at KTH. Theparticulate mass measurements are planned to be measured with a TEOM.The exhaust gases must first be diluted with air before the sample is sent to the TEOM.Therefore an ejector diluter for this matter also was designed and evaluated in the thesis.Emissions measurements have been done both with and without dilution to determine thedilution ratio. Tests have been done for different speeds and loads.Problems with stability of the dilution ratio have been an issue throughout the process andpressure pulsations in the exhaust pipe are believed to be the cause. More tests have to be done tomake sure that this is the problem.One idea is to make the inner diameter of the diluter nozzle smaller and see if it changes thedilution ratio stability.

Celiac disease (CD) is an autoimmune disease, induced by an immune mediated reaction in the small intestine after ingestion of gluten and related prolamines. There is a strong genetic linkage and most important are the genes that encodes for HLA-DQ2 and HLA-DQ8. The European Society for Paediatric Gastroenterology, Hepatology and Nutrition (ESPGHAN) has developed new guidelines for investigation of CD in children and adolescents, which include genotyping for HLA-DQ2 and HLA-DQ8. Therefore, the clinical microbiological laboratory in Västmanland wants to introduce a method for analysis of these genes. Microarray is a newly developed method for determination of the alleles HLA-DQA1 and HLA-DQB1 that encodes for the ?- and ?-subunits of the HLA-molecules.

This thesis describes the planning and development of a volume meter of pine and spruce cones. The product was designed and developed for Stigsjö Skog och Frö AB in Härnösand. It was developed taking into account a number of requirements set by the supervisor David Zetterlund. The main requirements were that the volume measurement would be fast and give accurate results. These are two requirements that are missing in today's volume measuring method which is very problematic for the company.The plant was visited several times in Härnösand, mainly to discuss the generated concepts with the supervisor and perform tests on the prototype.