All products will eventually end up as waste, which in a sustainable society has to be handled in an efficient and environment friendly way. This report focuses on waste fractions meant for combustion, often difficult to characterize. However, more homogeneous fractions that are treated biologically are also discussed.The study concerns the region of Borås, Sweden, where the waste plant Sobacken has provided a good starting point. On this site, fuel to the Energy-from-Waste plant of Borås Energi is prepared and the biological waste is treated through anaerobic digestion.One important part of the study has been to collect experience-based knowledge from the technical staff at Sobacken and Borås Energi. This information was compiled into an overview of wanted and unwanted fractions to the preparation plant and the boilers respectively.

The aim of this study was to develop a simple model for calculating stock costs for bio fuel at Billerud Karlsborg and subsequently recommending a suitable stock level of bio fuel. The stock components considered in the model are GROT (branches and tops), bark, dry wood chips, raw wood chips from barking and sawdust. The calculations are based on a probability distribution of historical deviations between ordered and delivered volumes. The model presents two different ways to manage the supply in case of irregular deliveries. The first way is to stock enough volume to cover the deviations and the second way is to compensate with a quick purchase from the spot market (at extra high purchase prices).

This report was written as a final thesis within the Department of forest economics at the Swedish University of Agricultural Sciences as a completion of the M.SC Forestry programme. The aim of this study was to create a model that, with respect to given stock levels, temperature, fuel usage and fuel price, would identify the optimal levels for purchase of bio fuels, optimal levels of incineration of bio fuels and the sum of the present values of all costs. The model would be applicable for a larger district heating plant. Data regarding temperature were received from SMHI. Information considering fuel prices was taken from the Swedish Forest Agency and the facts about fuel usage were collected from a large district heating plant, located in the southwest of Sweden. For the temperature, a sinus curve was adapted to describe the temperature over a year.

A piezoelectric injector was modeled, in this Master Thesis Project which was carried out at Scania CV AB in Södertälje, in GT-Fuel. GT-Fuel is simulation program from Gamma Technology.The simulation model for the piezo injector was divided into a hydro-mechanical system and an electrical system (Piezoelectric element). First the hydro-mechanic model was duplicated from Advance Continuous Simulation Language model (ACSL). The simulation results were then compared to the ACSL, to verify that the hydro-mechanical system was modeled correctly. The simulation results for the electrical model were also compared with a Simulink model.

Biogas is a renewable fuel that can be extracted from anaerobic digestion of many differentsubstrates, for example biological household waste. An alternative handling of the waste is tomix it with other wastes and incinerate it in a combined heat and power (CHP) plant. Thisstudy uses life cycle assessment to investigate which type of waste handling that is betterfrom an environmental point of view, anaerobic digestion with biogas production orincineration. The results are based on a case study of a biogas production plant owned by thecompany Ragn-Sells in Vänersborg. The alternative is incineration at a CHP plant inGothenburg.

AbstractThis report is made in cooperation with the municipality of Vasteras and technical committeestaff. The report addresses several topics that affect fuel stations in Vasteras. The reportcontains two parts, first is a inventory that review all stations in the area to be addressed. Theinventory is made with consideration to various things that geographic situation, whatcompanies are represented and what level of service stations have. And the second part of thereport, is done with the analysis of how it looks in daily situations review.

The main aim of this study was to investigate and compare different methods for the extraction of forest fuel from environments close to an archipelago. The study was based on relevant literature and published reports as well as personal communications. Forestry has traditionally been characterized by intense efforts to rationalize and mechanize the cutting technique used for timber and pulpwood. In line with the increasing importance of forestry, more concentrated efforts can be expected in the area of techniques and methods, especially for the above-mentioned product lines. In Sweden, forestry is of major importance and the Swedish economy and standard of living have mainly been created based on the revenues generated from it. Thus, it is vital that Swedish forests are harvested in an efficient and responsible manner. The demand for biofuel is growing and today accounts for 15% of total Swedish energy production, a share that will probably increase. This study is based on three research questions, which are described under the heading of Aim. The results reveal that the most profitable method for handling forest fuel is the traditional one, which is also the most commonly used method in southern Sweden, namely the stockpiling of logs in a clearing by means of forwarders followed by splintering at the place from where they will be distributed. Today, the high cost of barge transport required for the extraction of forest fuel in an archipelago environment renders such operations unprofitable.

In ambition to produce more and better harvests, artificial fertilizers are used to produce a better growth of crops in the agriculture landscape. This contributes to leakage of nutrients. Our forests also exhibit a leakage of nutrients. Air pollution contributes to more nutrients. High precipitation with high water flows as a consequence seems currently to occur more frequently in the county of Halland.

Wildlife is a valuable and renewable resource that promotes economical, ecological and social values. These values are important for developing and maintaining many rural societies. However, growing ungulate populations have led to increased browsing pressure on valuable forest trees and crops. Previous studies have proposed supplementary feeding and gamefields as potential methods for controlling the ungulate foraging and reducing browsing damage by providing other attractive food resources. However, quantitative estimates of potential biomass production of various gamefield crops and browsing pressure on the surrounding forest have been lacking.

To achieve the requirements to decrease emissions of greenhouse gases by 20 % by 2020, Swedenneeds to increase its use of bioenergy. In doing so it seems natural that those who already haveaccess to large amounts of biofuels in the form of by-products such as straw, wood chips anddigestible materials take advantage of these assets locally. By combining production of heat withpower production at the farm it may be possible to not only reduce the direct use of fossil fuel forheating but also reduce energy costs.The purpose was to simulate different cases of using a small scale biofueled combined heat andpower plant for farm-based systems. A MatLab-model was developed and used to draw conclusionsabout the costs for production of heat and electricity with different conversion technologies.The model uses climate data to simulate the variations in heat energy demand on a day-to-day basis.The given heat demand is the base of the simulation and from this the possible electric output iscalculated. This study has focused on the impact of the following properties: electric-, heat- andtotal efficiency, fuel, fuel price and specific fuel requirements.

Earlier attempts at mechanising pre-commercial thinning have been met with varying degrees of success. Most attempts have been based on techniques where residual stems are straddled. Early treatment is essential to limit damage on residual trees. One part of the present study is an evaluation of mechanised pre-commercial thinning using the new Vimek 404R. Vimek 404R is a fairly small machine that permits selective removal of stems, making it potentially suitable also for areas overdue for pre-commercial thinning. The study established the level of performance for the machine, as well as the improvement needed to make it an economically viable option.

Humidity problems and poor ventilation are factors that we associate with poor indoor airquality which are known to negatively affect health. Such problems have decreased with timein Sweden but, in other countries this is still a major problem especially during winter. InChile, this is most common in the central regions of the country, especially the Strait ofMagellan. This issue is primarily due to surface condensation happening indoors which bringsabout dampness which facilitates the growth of fungus and stains, foul odors, metal corrosionand more. This is due to a combination of poor ventilation and insufficient forms of heatingalong with buildings which have no insulation.

A new type of device for measuring thev m& ?rate of fuel sprays from a diesel fuel injector has been developed and the various steps in the development are described. The device works by deflecting all of the sprays from the injector at the same time by using a bell shaped deflector. A load cell consisting of a machined steel part with strain gauges mounted on it measures the resulting force. The shape of the curvature in the deflector bell shape has been evaluated by photographing the flow in a 2D?version of the curve shape.

AbstractThis report is made in cooperation with the municipality of Vasteras and technical committeestaff. The report addresses several topics that affect fuel stations in Vasteras. The reportcontains two parts, first is a inventory that review all stations in the area to be addressed. Theinventory is made with consideration to various things that geographic situation, whatcompanies are represented and what level of service stations have. And the second part of thereport, is done with the analysis of how it looks in daily situations review.

Development and construction of an electronic Breakout box is the main work for this thesis. The box is a part of a test system for the component Fuel Flow Transmitter and should convert signals to be suitable for a frequency counter. A previously constructed Breakoutbox for this purpose is being old and needed to be recreated. So SAAB Aerotech, Aircraft services, the company for the thesis work wanted to construct a new, more sustainable Breakoutbox adapted to a more modern technology. The signals to the box comes from the transmitter and should be converted to suitable signals for a frequency counter so it can show pulse and time difference between the signals.