Forest biomass is becoming an increasingly important source of renewable energy, and thereby the demand is increasing. There is currently 213 000 km of forest roads in Sweden that could be suitable for biomass harvesting. Harvest of biomass along forest roads both provides biomass and maintains the quality of the roads. Currently, the volume of biomass along roads can only be assessed post harvest, chipping and industry deliverance. As the decision of whether or not to harvest should preferably be based on more than experience, the TJ-method has been proposed. The TJ-method is a subjective method to quickly determine the dry matter quantity with the assessment being conducted from the roadside.

The countries in the European Union have agreed to increase their percentage renewable energy sources to 20 %. To reach this goal an increase of biomass production needs to be made. One way of achieving this is by using nonnative species. Poplar in Sweden produces biomass faster than the domestic trees. In the southern parts of Sweden plantations has been made with good results. In the northern parts survival is a problem that needs to be solved before plantations can be made for commercial use.

The aim of this study is two folded. We wish to investigate if there is a value premium from hedging jet fuel exposure for American and European airlines. We also seek to answer if airlines can affect their probability to default by using Risk Management. During the period 2003 ? 2006 there existed a value premium for airlines that hedged their expected future consumption of jet fuel.

The purpose of this study is to compare the economic differences between withdraw of forest fuel and withdraw of pulpwood in first thinning, to see which method gives the maximum profitability (income - cost). Another purpose is to investigate the economic impact of the thicket cleaning. The study compares four different methods: i) pulpwood output with thicket cleaning, ii) pulpwood output without thicket cleaning, iii) forest fuel output with thicket cleaning and iv) forest fuel output without thicket cleaning. The study was conducted in a 30-years old stand, dominated by spruce, outside Harg in Uppland. The method that generated the best economic net income was pulpwood without thicket cleaning. It generated a positive net of 1,383 SEK per hectare. Forest fuel output without thicket cleaning also generated a positive net in 720 kronor per hectare.

Vehicle simulators are becoming more common in vehicle industries. Company earns lot of money on simulations instead of real tests. Real tests are necessary but not made so extensively as before.In this thesis the building of an vehice simulator will be described and a comparison between three different cruise controls. The three cruise controls are PI-regulator, a regulator who regulates after positions in the terrain and a MPC-regulator. The reason for choosing this three is to see the difference between simple regulation and more complex regulation with respect to fuel consumption, travel time and complexity.The vehicle simulator is made in Matlab/Simulink, Visual Studio and Open Scene Graph.

A Monte Carlo simulation of the ELECTRA reactor using (U,Zr)N fuel and a liquid lithium coolant is performed using the Serpent simulation code. The results show a reactor with a total reactivity coefficient of the coolant, fuel and material expansion that is strongly negative. These properties make the ELECTRA reactor a good candidate for a safe space reactor that could be used for propulsion of manned and unmanned space vehicles to Mars and other parts of our solar system..

At SIA TallOil's pellets factory in Latvia wood shavings and saw dust are dried with flue gases from a gas burner. TallOil wants to replace the gas with a biofuel that is available at the pellet plant. The reason for this is the unstable gas market in Europe in combination with the fact that TallOil wants to improve its profile as supplier of renewable bio fuels. In this project the technical and economical possibilities for a fuel conversion to ether bark powder, wood shavings or wood powder have been investigated. These fuels should be burned in one of the following applications: TPS BioSwirl, VTS Multifuel burner or Saxlunds bio fuel combustion plant Due to the fact that the fuel alternatives available are relatively common except for bark powder, the work has mainly been focused on bark powder.

When the Swedish Forestry Act was changed in 1994, brushing of young stands became non mandatory. Since then the annual need for brushing in the country has increased by about 100 000 hectares per year. In later years the price for biomass energy has increased to the same level as pulp wood. The high price on biomass energy and the large areas of stands in the need of brushing has created a new market with its own technical, economical and environmental conditions. There is a development of various techniques to manage the forestry stands with late brushing.

Bioethanol is one alternative energy fuel that can be produced from different types of biomass. Second generation bioethanol comes from fermentation of lignocellulosic material and can be seen as a more environmental friendly alternative as e.g. forest residues and agricultural by-products are used. To be able to use lignocellulosic biomass in ethanol production, it has to be subjected to different treatments first. In this study, aspen sawdust was used as lignocellulosic material.

A third party access to district heating networks has been proposed in Sweden, to increase the competition on the district heating market. Such third party access could create opportunities for the agricultural sector as an energy producer. This study describes the technical, economical and environmental prerequisites for a farmer cluster to build and run a heating plant, fueled with local wood fuel. The heating plant in the described scenario is 8 MW and will supply a village of 1000 houses, and is fueled with wood chips exclusively. Supplying a heating plant with fuel puts high demands on the logistics, since there need to be a continuous flow of fuel. In the scenario, wood residues from felling and thinning is stored in stacks in the forest, and a few times a year chipped and transported to a storage area at the heating plant. In the study, an estimation of the profitability has been made by estimating the cost of the investment, personnel, operating and maintenance costs and costs for the fuel and ash handling.

This project examined the possibility to create an electronical aid with the purpose of increasing environmental awareness and to design the aid in a fashion that inspires other to develop similar applications. The impact of car traffic was examined, and the base of the aid was built up in modular form to simplify the hardware aspect. For the active, data processing part of the aid the Arduino platform was chosen because of its simplicity and big possibilities of help in different internet fora, for those who choose to create similar applications in the future. The main part of the project var the use of real-time information from the car?s on board diagnostics.

The aim of this report is to give a picture of how attitudes and behaviours of owners of environment cars look like and how they can be influenced. The alignment lies on environmental cars which run on biogas and ethanol which both are renewable fuels. The starting point is to sort out if it is environmental thinking that controls the choice and use of an environmental car. The feeling is that there are many other factors that can be more controlling, for example the price and the quality of the car. The result of the questionnaire survey which is the foundation of the report shows however that those who buy an environmental car do it mostly because of environmental reasons.

Ungulates are causing conflicts between stakeholders due to browsing damage on forests and agricultural crops. At the same time there is a big demand of keeping high ungulate densities for sports hunting and recreational purposes. Movement patterns of ungulates are strongly correlated with forage availability. Therefore, measures affecting forage quantity and distribution might be a tool to reduce the economical losses in forestry without decreasing the ungulate densities and thereby decrease the conflict between different interest groups.This study investigated the potential biomass production and utilisation of marrow-stem kale (Brassica oleracea var. medullosa), at game fields in Misterhult, Sweden, as well as browsing effects on adjacent forests.

In this literature review the characteristics of two free-floating macrophytes, water hyacinth   (Eichhornia crassipes) and duckweed (Lemna sp.), and two microalgae, Chlorella and Scenedesmus, have been examined regarding their suitability as efficient nutrient removers in the treatment of wastewater with high levels of nutrients and suspended solids from a biogas plant in Loudden. The needs required for the plants to be able to grow in wastewater and the amounts of biomass they can produce have also been studied. The results show that Chlorella is capable of a very high uptake of nutrients in photobioreactors with high nutrient loadings. With an ammonia uptake maximum value at 10900mg/m2/d Chlorella outshines the other organisms in this study. The test organism that performed the closest to Chlorella in terms of nitrogen uptake was water hyacinth with an uptake about 1602mg/m2/d.

The objective of this M. Eng. Diploma work was to validate the new version, CASMO-5M, and compare the results with CASMO-4E, by using the same input in both programs. The tasks that were included in this work was to compare TIP-measures, k-effective curves (warm), k-effective curves (cold), the effect of void on k-effective, the isothermal temperature coefficient (ITC), the moderator temperature coefficient (MTC), damping ratio calculations, internal effect in a fuel bundle of a BA-rod, the speed of BA-out burn, impact of xenon, falling control rod, margins and isotopes.The TIP-measures showed that the differences were small for all reactors, at most, 6% nodal improvement by C5M (Casmo-5M) for Oskarshamn 3. The warm measurements of k-effective showed that C5M had a higher value for all cycles of Oskarshamn 1, 2 and 3 in comparison to C4E (Casmo-4E).