Companies become more and more aware of the added values of the packaging. A well chosen and developed packaging can reduce the costs for the companies through reduced costs for transports, reduced quantity of waste and discards and increased goodwill for example. The companies? costs for salaries can also be reduced due to the increased packaging handling efficiency and the reduced costs for sick leave, reduced work capacity and rehabilitation etc. that can arise when handling poorly developed products and packaging.

There is a shortage of locally produced high quality protein concentrates in Europe andSweden. Local production would decrease the dependency on imported soybean and meet thedemand for organically grown feedstuff from ecological dairy farmers. Field bean (Viciafaba), peas (Pisum sativum) and sweet lupin (Lupinus angustifolius) are good alternatives tosoybean, but contain anti-nutritional substances (ANS) that could reduce their use as proteinconcentrates in dairy cow diets. The aim of this literature study was to review which ANSfield bean, peas and sweet lupin contain and whether they affect dairy cows negatively.Trypsin inhibitors and Chymotrypsin inhibitors (TI) were present in all three crops. TI couldbecome inactivated and degraded in the rumen, but due to the high passage speed of thedigesta, most TI left the rumen in an active state.

The present study examines power relations, textual genre and attitudes to the matching process in the labor market in the employment office?s opinion articles in the period 2009?2014.     The power relations that emerge in the debate articles between employers, job seekers and private employment constitute the study's main question.The theoretical starting points are taken from Fairclough?s critical discourse analysis (1992, 2001, and 2010), where the discursive practice consists of the employment office?s production of opinion articles during a recession. The social practice consists of the laws and regulations that make its actions to reduce unemployment in the society. The method is derived from Halliday?s (1994, 2002) systemic functional linguistics.

AbstractManagement is a field that started getting attention in the beginning of the 20th century by Frederick Taylor. His publication is called the Principles of Scientific Management and is based on the principles of using scientific methods to find the best way of conducting each operation within a production facility. Many of Taylor?s principles may appear obsolete today but the matter of an effective material flow is still highly current. Efficiency is the relationship between the input into an operation and its result.

The object with this thesis is to evaluate which of the catch crops oil radish and white mustard in combination with establishment method, give the most effective nitrogen uptake. The main purpose of the catch crops is to reduce leakage of nitrogen. They are sown after the main crop and killed before the next crop. In Sweden the farmers gets subsidies to establish catch crops. The thesis is limited to the trail L3-9010 sited at HS- Malmöhus, Borgeby Gård, 237 91 Bjärred, Sweden, 2007. Only treatments with oil radish, white mustard and the reference treatments were studied.

The background for this degree thesis is a need to replace the existing seal used to protect equipment containing secret or sensitive equipment used by Swedish Defence. The target design should satisfy both the need for tamper evidence and reduce Life Cycle Cost. In developing a new design for a seal, additional benefits such as improved logistics support and indication of attack methods such as heat and solvents have been considered.The lack of guiding principles for end users of seals became evident during the interviews. Major concerns for the future are education of users, information about actions if a seal is broken and user liability.The design work was divided into several phases. A feasibility study was performed including investigation of theory of labels, materials and possible technologies.

Organisations constantly live under the potential threat of events and accidents that seriously could harm the organisation. Forsmarks Kraftgrupp AB, the company that this master thesis focus on, is in no aspect excepted from this threat. Through an early identification of near misses and the taking of corrective action in use, Forsmarks Kraftgrupp AB has managed to reduce the likelihood and the consequence of events and accidents. The purpose of this master thesis is to evalutate Forsmarks Kraftgrupp AB?s operation experience process on the basis of IAEA?s and WANO?s requirements within the field of operation experience and to develop a usable system applicably within the field of operation experience.The thesis is divided into two parallel tracks, where one is the evaluation of the operation experience process and the other the design of a usable system, applicably within the field of operation experience.

Ever since ABB has begun diecasting their rotors instead of permanent mold casting it,variation in the quality of the cast has arisen. Diecasting is performed in three differentmachines, M1, M2, M3 with 400, 660 respectively 800 tons of die locking pressures.The aim of this thesis is to answer the following questions:What is the ?right? cast quality? How is the right quality achieved?For sizes 160-180 solutions will be proposed that consider eccentricity between thelaminate and the short circuit ring as well as elimination of the thin Al film that appearson the outer periphery of the rotors.Through considering the statistic material the most often diverging rotor type has beenidentified and one of the actual rotors has been sent to a laboratory to be analyzed inorder to establish the current defects. The result of the analysis shows that there areplenty of gas- and oxide-porosity.It has been proved that every time the dies temperature decreased below 120°C thecontent of gas porosity increased. It is due to rapid solidification of metal that flowsthrough the ?cold? laminate.It has confirmed that enhanced porosity in squirrel cage causes high impedance in therotors.

Biogas is a renewable energy produced through anaerobic digestion, which means that organic matter is degraded by microorganisms under anaerobic conditions. The produced biogas can then be used for cogeneration, electricity, heat or upgraded to vehicle gas. Eskilstuna Energy & Environment AB has four digesters at Ekeby water sewage treatment plant, Eskilstuna. One of the biogas reactor (RK4) is equipped with a jet-mixing system while the remaining digester uses top-mixing. The mixing system is an important parameter to achieve optimum operating conditions for the process regarding gas production and degree of digestion.

Title: A Culture School?s (?En Kulturskolas?) work in an multicultural areaThis research is a study of Culture Schools in Angered which include both Lärjedalens and Gunnareds Culture Schools. The Culture Schools of today reach only a limited part of our society, and for this reason the purpose of this research has been to study a school in a multicultural area. To learn from others? experiences is an important step in work with school development.

Introduction: The auditor's going-concern warnings express the quality assurance of information and if these are wrongly based, the stakeholders become deluded. Previous research has shown that auditors do not have any major difficulties in identifying companies that are financially distressed to the extent that they risk receiving a going-concern warning. International studies on the determinants of going-concern warnings have instead focused primarily on the auditor's decision regarding companies that are already in bad shape financially. Auditor grounds for issuing a going concern warning may be linked to factors related to the client, the auditor, the audit firm, the relationship between the client and the auditor and the environment. Purpose: The purpose of this study is to find out what specific factors that affect the auditor issuing going concern warnings for financially distressed companies.

For a long time Lean has been a well-known concept among manufacturers. Theinterest of understanding Lean and the ability to implement it is common amongcompanies. The concept of Lean, used in the right way, can help companies to reducetheir lead times, their complexity and increase the efficiency of the working processes(Hyer och Wemmerlöv, 2002). Unfortunately the work towards increased efficiencyhas primarily been focused on manufacturing and plant work, resulting in that Leanhas been adjusted to these areas. The conclusion of this is that companies don´tprioritize to improve processes such as administrative ones.

Today´s debate in farming is being focused on tourism, outdoor life and hobbies in the rural areas. This is of interest also for the general public as a way of counteracting the depopulation of the rural areas. Within the last years, the farming has become more technically advanced and hence efficient. This has led to increased production volumes and wider selection of products with lower margins for the farmer as a consequence. When the profitability is reduced, the farmer is faced with the choice of either increasing efficiency or diversification of the business.

Transportation constitutes a large part of the forest industry's raw material costs. Transport also contributes a significant proportion of the carbon dioxide emissions. In order to reduce both the cost and environmental impact different types of decision support are required. These, in turn, require extensive information about the road network and correct information on road path selection and transport distances. In the development of national road data base for forestry (SNVDB) a road selection application has been included.

This thesis deals with the field of warehouse management, focusing on frequency control of stock. The purpose of the thesis is to reduce the warehouse staff mileage by placing an article based on its number of picks, i.e. how frequently it gets picked. In order to achieve relevant results the following four questions have been answered in the thesis: How should the articles be placed with regard to the picking frequency?Which factors, if any, needs to be addressed beyond the picking frequency when articles are placed based on frequency?Can the present picking system be improved?Is frequency placement with regard to the picking frequency profitable to implement for the company?The thesis is based on literature studies and on the data that has been collected from the company?s business system.