During the last decade, the construction industry has focused on improving and optimising its production process. The construction industry is now facing larger changes regarding efficiency in their supply chain for the next decade. Many companies are now trying to optimise its supply chain together with its supplier. JM AB, which is one of the biggest construction companies in Sweden, is looking at different options to improve its own logistics together with their suppliers. One option is to use a terminal between JM and the suppliers to solve problems such as quality, custom service and inventory for the in production.

The aim of this study is to illustrate conceptions held by librarians and library and information scientists about weeding practices of printed books in public libraries. The study has been carried out by performing a series of qualitative interviews with librarians and by study of earlier research relating to the subject of weeding. The results have been analysed by utilizing a textual analysis method called idea and ideology analysis using so called dimensions to analyse and structure the results. The results indicate that weeding at Swedish public libraries is carried out by a mixture of objective and subjective methods, with certain statistical elements. Weeding procedures mainly appears to be legitimized according to what one refers to as knowledge of the local community, although lack of lending are cited from time to time.

When the Tsunami occurred on Boxing Day 2004 it caused a major stress upon the governmental agencies in not only the affected areas but also in states that had a large number of citizens in the affected area. The governmental agencies were not prepared for the demands from the citizenry in these countries to deal with rescue and crisis management in areas situated halfway around the globe. This thesis main purpose is to research what the causal mechanisms of Sweden?s and Finland?s crisis management were through the method of process tracing. Taking its theoretical stance in Allison?s & Zelikow?s three models of decision making, the thesis compares the course of events of the first two critical days in Sweden and Finland to establish what mistakes were made during this critical period.

This paper describes and develops a trade off model of optimal capital structure by Bradley et al. (1984). The model is then tested to examine how changes in corporate tax rates affect the optimal capital structure of firms. Based on theoretical implications of the model, four hypotheses are derived stating that firms? optimal debt-to-value ratio is (1) negatively related to financial distress costs, (2) negatively related to non-debt tax shields, (3) negatively related to firm volatility and (4) positively related to the corporate tax rate.

The purpose of this paper is to find more understanding for pupils in compensatory educational situations and get an idea about how they place themselves in the social hierarchy. In my study I have interviewed four pupils with different experiences from school with the common denominator of being placed in a special class during some hours of the week. The purpose of this placement is to get them to achieve better results in various subjects depending on their grade but this also means a social separation from friends in the ordinary class and this doesn't correspond well with the democratic idea of "one school for all".What I found was that these pupils categorize themselves different from each other and while two of the pupils find themselves very included in the school's social network the remaining two had problems functioning satisfactory in a social matter according to their own liking. The feeling of exclusion though can not be connected to their participation in the special class but rather to their earlier social experiences..

Detta examensarbete beskriver hur förarbetet till att datorisera ett underhållssystem genomförs. Uppdragsgivare är Lear Corporation i Torslanda. Examensarbetet består av två delar: utvärdera en på förhand vald programvara och att dokumentera allt förebyggande underhåll (FU). Syftet är att få bättre kontroll och planering av förebyggande underhåll (FU) i framtiden. Programvaran som skall utvärderas om den är lämplig för ändamålet heter Tekla? Maintenance.Målet var att dokumentera allt förebyggande underhåll (FU) för två av tre liner i Lear Corporations fabrik i Torslanda.Det visade sig att Tekla? Maintenance uppfyllde de krav som fanns.

Scana-Booforge is a Swedish company which specialize in heat treatment of various metal. The treatments take place in quenching ovens, where fans are used to circulate the hot air. The fans used today do not have a satisfactory lifespan. This thesis aims to develop a new design of the fans for the quenching ovens, and the goal is that the new fans will bring cost savings for Scana-Booforge.The design development process started with mapping out the environment in which the fans operate, and with analysis of the existing fan structure and damages, in order to establish the cause of failure and of short durability. The performance of the fan were also established at this stage.

The paper evaluates two housing proposals with Space syntax as method. The proposals are very different in a topological sense but are in a configural sense almost the same. This effect is because both proposals connect themselves to the existing configural structure of the city in the same way. Neither of them takes advantages of the most integrated streets in the existing structure and use them to concentrate pedestrian and car flows to the streets or points which are intended to be the most urban areas. The knowledge of Space syntax and this evaluation puts focus on the pour understanding among architects and planners of what effect urban design proposals will have..

In today?s society there is an increasing demand for renewable energy sources such as sun and wind power. These sources are intermittent, and energy storage is therefore needed to ensure a constant power supply. This report compares pumped hydro energy storage (PHES), compressed air energy storage (CAES), flywheels, batteries, super magnetic energy storage (SMES) and hydrogen energy storage.The opportunities for further development are limited for PHES and CAES in comparison with the other technologies. Lithium-ion batteries and hydrogen energy storage are considered to have the most potential in the future.

Denna studie syftade till att ta fram ett ramverk för utveckling av API:er för tjänsteorienteradearkitekturer. Studien tar sin utgångspunkt i forskningsprojektet e-Me (utvecklingenav en integrationsplattform för att underlätta studenters vardag) samt en benchmarking avde i nuläget mest använda API:erna på webben. Studien har fem faser: En litteraturstudie,en benchmarking, en kvalitativ genererande intervjustudie, en teoribildande fas (framtagningav ramverket), samt en kvalitativ validerande studie. Litteraturstudien tar upp sådanafenomen som utvecklingsmetoder, systemarkitekturer (bland annat SOA) samt metautveckling.Denna studie låg till grund för den första intervjustudien, som i sin tur låg tillgrund för benchmarkingen. Resultatet av dessa två studier bildade tillsammans en grundför ramverket SOAPIF (Service-Oriented Application Programming Interface Framework),som till en början innehöll fyra olika faser: Conceptualization, där man försökerbilda sig en uppfattning om vad API:et skall exponera; Definition, där man försöker definieraett kontrakt för API:et; Testing & Implementation som tar sin utgångspunkt i testerför att implementera API:et; samt Delivery, som är den fas där API:et skall levereras.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

The purpose of ?The Lake? was to create an experience with music and visuals working with no budget.A personal purpose was that I wanted to explore new areas in design, like scenography, and combine them with my previous knowledge and skills. My method was to keep my hands busy at all times and use new materials. I also wanted to work with other creators and learn from their methods. Together with a musician I created the music and the concept for the project.

Purpose/aim: To investigate individual experiences of how a new communication technology, e-mail, influences a) the structure of the internal communication ? does it for example make networking any easier? ? and b) the form of the persons everyday language.Material/method: A theoretical framework gathered through a literature study and empirical data gathered through interviews with two persons.Main results: Differences and similarities exist between the experiences studied in this paper. The most unexpected result is that the system of e-mail does not seem to be able to create new channels of communication. If anything, it reinforces the structure that already exist. An aspect of decisive importance is the original rules and norms concerning internal communication within the organization..

Syftet med uppsatsen är att beskriva projektets gång och redogöra de olika val som har gjort. I projektet har jag sammarbetat med Volvo personvagnari Göteborg där jag också har suttit och arbetat. Temat för hela projektet blev ?barn i bil? och sedan också förvaring. Utifrån detta temat tog jag sedan fram ett koncept och en produkt som ska passa i Volvos nya personbilar.

Polaris Eyewear is one of the world's leading companies in innovative eyeweardesign. My assignment has been to, in collaboration with them, expand their range with a pair of children's glasses, while maintaining the innovative character they are so known for.The problem with childrens eyewear today is that most of the time the glasses tries to mimic the adult eyewear and the ?childish? type of designing is spared. From an ergonomic point of view, a child's nose is smaller than an adults and therefore needs a different type of shape and nosebridge. In addition, children have softer ears, which means that they need a different type of shaftend as well.