The purpose of this report is to examine various roof structures that can operate in a warehouse with large spans. The building that is examined in the report is currently under construction, and the roof construction has already been selected. The selected roof system will therefore be compared with some other structures and materials that have been possible. The report will evaluate three different frame materials, two insulating barriers and two overlaying materials. Another important part in major construction projects is the roof safety.

This Master Thesis is a product development project that has been carried out incooperation with Metso Paper Sundsvall AB. The task has been to develop a holdingsolution that generates force between two rolls and to evaluate the new solution withrespect to functionality, manufacturing, structural stability, costs, assembly etc. Theroll holding solution is a system that is part of a rollpress. The rollpress is used towash and dewater pulp. The existing solution creates forces that have to be absorbedby the gable of the press.

The report aim to increase awareness of factors that have a major role whenremodelling an apartment building from the 1950s to offices.The thesis can be used for future projects when remodelling apartments to offices.The report can provide ideas and inspirations on how this can be done in aneffective way, ie . A way that does not require rebuilding the supporting structure,but only non Bearing walls. The thesis also gives insight on the parts that will needto be supplemented from Boverket?s requirements in terms of accessibility,acoustic and fire requirements.The methods used in this thesis are literature studies, case study and sketch work.In the literature studies, the primary sources were Boverkets byggregler BBR, andArbetsmiljöverkets föreskrift AFS 2009:2 but other literature were also used. Theprimary items were chosen from the literature studies and they were furtheranalysed in the sketch work.

The purpose of this thesis is to investigate the degree of influence of holes in the web of steel beams with long spanson weakening of their Bearing capacity. Making holes in the web of the beam generally reduces the Bearing capacity of the beam. However, it might be necessary seen from both an architectural perspective as well as from a building services perspective by creating an opportunity for building installations.The objective of this thesis is to examine how much an I-beam can be weakened without sacrificing safety and functionality. The investigation has been done by using Finite Element Method through commercial software.The regulation for structural design of building structures in Sweden used to be specified in the document known as BKR. But this was replaced by the European norm Eurocode back in May 2011.

This report is the result of a thesis carried out at the Department of Innovation, Design and Technology (IDT), at Mälardalen University on behalf of ABB AB Machines.The year was 1988 when ASEA and Brown Boveri formed a joint venture under the name ABB (Asea Brown Boveri).We perform our thesis at the division Discrete Automation and Motion where they primarily develops, manufactures and sells synchronous and asynchronous AC motors and generators.The main purpose of this thesis was initially to write a general packaging instruction, but the priority changed to develop more specific packaging instructions for Rotors, Stator gables, Bearing support and Outer Cover (plates) instead.The work started off to deal with a problem about that the staff had to start its work to grind away rust on the stator gables due to those stored outdoors. The result was mainly an investment in a new gable rack so that the material can be stored inside, as well as a packing instruction as it was originally intended.The problem on the Bearing supports were that the staff thought it was demanding and difficult to clean them from the rustproofing they were greased in. If it is not possible to remove all rust protection it can cause the paint to not attach properly. After having compared with similar articles a test were done to order a pair of Bearing supports without corrosion inhibitor, which gave good results. This initiative also set in motion a process to do the same for more different items.For special pallet, a survey were made of the process with two different VSM and a calculation of how much ABB would earn at ordering more special pallets than getting the material delivered on the A-pallets.

The current standards for design of steel beams are divided into four classes based on the slenderness of cross-sectional parts. Depending on the section class a beams load capacity is either determined by a plastic, elastic or a reduced elastic model. The division between cross-sections calculated by a plastic and an elastic model is today done in a very harsh way with no smooth transition. This leads to a large difference in the calculated resistance for the sections located near the class limits. Elasto-plastic sections are in the current situation calculated as purely elastic and their large plastic reserve is not considered in the current standards.

This thesis aims to illustrate how environmental impact can be reduced, through the use of lean concrete. It also illustrates how environmental data can be applied to a house through implementation with BIM. In this study a unique concrete structure developed by Swedish Cement and Concrete Research Institute is assessed for environmental impact, by calculating the carbon dioxide equivalents using LCA methodology. The construction is a sandwich element where the concrete is made ??up of three layers.

A great number of empirical researches show that hedging is associated with higher firm value, particularly hedging interest rate and exchange rate. However, there is no clear support for value-added risk management hypothesis in the case of producers of commodities. Moreover, according to Shrand and Unal (1997), there are two types of risks, core business risks (or core risk) and homogeneous risks (or non core risks), which are based on a firm's comparative advantages with respects to the source of risk. Firm can earn economic profits for Bearing core risks in which it has a comparative information advantage. Firm earn a zero economic rents for Bearing non-core risks, where it has no advantage information than its competitors.

A pavement construction designed to cope with the different type of traffic loads; it is exposed to and at the same time it can resist the effect of the climate. A road structure consists of sub- and superstructure which is divided by a boundary known as terrace. During the construction of unbound layers (base course and sub-base course) in the superstructure, it is always ensured that the material meet the requirements for Bearing capacity and the degree of compaction. These parameters are controlled by various laboratory tests and control methods. To obtain increased knowledge of the material and improve the quality of the compaction in the field, it is necessary to perform laboratory tests in order to determine material properties.A base course material 0/ 32 mm limestone from Gotland (Hejdeby) was investigated in this study.

IRB 340, Flexpicker is an industrial robot used for sorting, packaging and the handling of details up to two kg. The Flexpicker is a delta robot, meaning that it with three arms controls a triangular plate, swivel, in a work area shaped like a cylinder. Joints using plain Bearings connect the arms.The plain Bearing in use today consists of a plastic ring which slides against a hard anodized joint ball. Despite the fact that the plastic contain friction-lowering additives, the Bearing needs to be lubricated to prevent noise. Because the robot is used in food and drug handling environments, where the demands on hygiene are set very high, the robot is often washed.

The purpose of this thesis is to build on the current debate on male circumcision and from thetwo perspectives, consequentialism and non-consequentialism, describe the conflict of rightsthat exists on the issue and outline a normative conclusion about whether Sweden should banmale circumcision of boys or not. The idea is to clarify how the two sides' approach to theconflicting rights differ on the issue. The perspectives intends to provide further clarity to thearguments and provide a framework to resolve the rights conflict by, which creates morefavorable conditions to understand the moral Bearing of the arguments in the debate. Thesurvey is conducted as a debate analytical study, conducted by compiling and organizing thearguments for the various positions in the debate. Based on the two theories I conduct ancritical analysis in which I examine the extent to which the arguments of each side lives up tothe perspectives moral standards.

The most predominant method for forest harvesting in Sweden is the cut-to-length method based on two-machines, a harvester that fells trees and cut them in a predefined length, and a forwarder which transports logs to a landing area for further transport to a processing facility. New machine solutions have to be much gentler to the ground than today?s machines. To be able to develop a forestry machine that preserves the terrain requires a proper understanding of the interaction between tire and soil.The goal of the project is to contribute to the existing knowledge of forest machine tire-soil interaction and to develop a tire-soil model that enables dynamic simulations of forest machines operating in rough terrain. The modeling has especially been focused on the interaction between tires and soft ground.A comparison of theoretical data of different WES-based terrain interaction models and a comparison test data from a full scale field test is presented.

The purpose of the project was to design a furniture collection that can be packed in flatpackages and be assambled by the buyer. The idea is that the assembling will give the furniturean added value. I have tried to create a collection that is easy to produce so that the productwill be cheap for the consumer.The collections aestethic is inspired by Gothenburgs harbour The wide and Bearing elementsof the furniture has set much of its expression.Joints has been highlighted details instead of being hidden..

AbstractIn this study, then collaboration agreement impact of the work on 11 and 19 § § MBL are studied. The employer and collective agreements Bearing employee union are often involved in collaborative agreements to facilitate cooperation between them. Issues addressed to collaboration areoften questions related to employee participation. The purpose of this study is to investigate two local employers and related collective Bearing employee unionsview of the cooperation agreement related to the MBL. The purpose leads to these questions:?How can co-operation agreements affect 11 and 19 § § MBL??What are theadvantages and disadvantages cooperation agreementscan lead to, regardingemployer disclosure and negotiation duty?To try to sort out these issues are interviews conducted to create a greater understanding of the work of the Cooperation Agreement between organizations and how it affects them.Results of the study suggest that collaboration agreement leads to simplifications in the work of the employer's information and bargaining duty.

AbstractIn this study, then collaboration agreement impact of the work on 11 and 19 § § MBL are studied. The employer and collective agreements Bearing employee union are often involved in collaborative agreements to facilitate cooperation between them. Issues addressed to collaboration areoften questions related to employee participation. The purpose of this study is to investigate two local employers and related collective Bearing employee unionsview of the cooperation agreement related to the MBL. The purpose leads to these questions:?How can co-operation agreements affect 11 and 19 § § MBL??What are theadvantages and disadvantages cooperation agreementscan lead to, regardingemployer disclosure and negotiation duty?To try to sort out these issues are interviews conducted to create a greater understanding of the work of the Cooperation Agreement between organizations and how it affects them.Results of the study suggest that collaboration agreement leads to simplifications in the work of the employer's information and bargaining duty.