Sök:

Sökresultat:

253 Uppsatser om Batch sizes - Sida 3 av 17

Traktstorlek före och efter omarrondering i Dalarnas län -frågor kring Lantmäteriets båtnadsberäkning

Land consolidation is a major problem in many countries in Europe. In Sweden, mainly the state of Dalarna, there is a strong consolidation of forestland, probably the strongest in all of Europe. The consolidation is a big obstacle for forest management and ownership questions due to the often long and narrow strips of land. One of the main reasons for land consolidation in Dalarna results from the heritage procedure, were land is divided between all of the inheritors. To improve the consolidation large surveys in the consolidated villages in Dalarna are carried out. Many laws have to be followed due to the survey.

Avskiljning av ammoniumkväve och fosfatfosfor i reaktiva filtermaterial : skak- och kolonnförsök

In Sweden more than 400 000 private households have not yet sufficient wastewater purification. These effluent is considered as an increasing problem and many onsite purification methods have been studied. In this investigation, the method of reactive bed filters have been tested by column and batch experiments. Five different kinds of filter materials with reactive surfaces have been studied concerning their capacity to absorb ammonium and phosphorus from wastewater. The materials that were examined are Filtra N, wollastonite Filtra P, blast furnace slag and Polonite®.

Batch-digitalisering och GIS-anpassning av analoga enkätdata

I denna rapport beskrivs arbetet med att tillvarata och anpassa data från en enkätundersökning till digital hantering i GIS. Undersökningen är en besöksstudie utförd av Karlstads kommun och Skogsstyrelsen för att kartlägga människors rörelsemönster i I2-Skogen, ett gammalt militärt övningsfält som numera används som rekreationsområde. Enkäten består av ett antal frågor om exempelvis typ av aktivitet, ålder och åsikter om området, samt en karta på vilken besökaren ritat in var i området han eller hon rört sig. Utgångsmaterialet för arbetet har varit en databas innehållande enkätsvaren, samt originalkartorna med den ritade informationen. Arbetet omfattar dels att undersöka om kartinformationen kan digitaliseras automatiskt genom scanning och vektorisering i batch, och dels att normalisera och strukturera databasen med enkätsvaren.En metod för digitalisering har utarbetats och testats på ett urval av kartorna.

Förutsättningar för småskalig solelproduktion i Australien

The study aims to investigate the feasibility of small-scale electricity production with solar electricity systems, also known as PV (photovoltaic) systems, in Australia. Due to the global warming, sustainable energy has in recent years become an increasingly important issue, both internationally and in Australia. With one of the largest dependencies on fossil energy sources in the world, the country's abundant solar radiation is a possible solution to this issue.Both the technical and the economic feasibility of small-scale PV systems were investigated. On the technological side, the electricity generation, distribution and consumption systems were studied. On the economical side, the parameters that drive the profitability of a PV investment were investigated.

Metodiker vid regelskrivning

Examensarbetet utreder metodiker för skrivning av de regler som styr den taktiska simulatorn TACSI, vilken används och utvecklas av SAAB Aerospace, samt möjligheten att använda de befintliga verktygen ADEC och TACSI-batch för detta. Tonvikten i arbetet ligger på att att skapa en metodik för regelskrivning baserad på inhämtad kunskap kring den problematik som möter gamla och nya användare av TACSI. Denna metodik avses både fungera som ett hjälpmedel för TACSI-användarna såväl som en startpunkt för vidare arbete inom området..

Bogsår hos digivande suggor: inverkan av strategisk halmning och hull

The objectives of this experimental study were to investigate if a strategic method to supply loose housed sows with large quantities of straw 2 days before expected farrowing and if the sow?s body condition had any effect on the occurrence of shoulder lesions 5 weeks after farrowing. Data came from a study conducted on four commercial piglet-producing farms in southwest Sweden between March and December 2009. At each farm one batch of sows was followed during two consecutive lactations. The sows were randomly assigned to two different treatment groups and the sows that remained in the batch during the second lactation switched treatment group.

Relationship between moose (Alces alces) home range size and crossing wildlife fences

Wildlife fences are today commonly used along highways to reduce the risk of vehicle collisions with wildlife. Since traffic and roads have expanded over the years, wildlife behaviour has become more interesting not only for the prevention of vehicle collisions but also to understand how human activities impact their natural habitats. Moose is one of those animals that have increased in interest in such studies. In this study, I tested if the probability to cross wildlife fences of moose would increase with increasing home range sizes, and also at what time of the year they cross. The study area is situated in Nordmaling municipality, located in Northern Sweden in the County of Västerbotten.

Mineraliska material som reaktiva filter för avskiljning av tungmetaller från dagvatten

Highly polluted urban storm water from e.g. highways can contain large amounts of heavy metals that may cause harm if they are discharged into recipients. To remove the heavy metals a possible low-cost method that does not require much maintenance, could be the use of reactive filters with filter materials consisting of industrial residues or other cheap mineral based materials. Dissolved metal ions are removed by reactive filters through the processes of ions binding to active sites on the surface of the filter materials, or by formation of insoluble precipitates.The ability of CaO-treated granulated blast-furnace slag, iron oxide coated sand, olivine and nepheline to remove seven heavy metals (Cr, Cd, Cu, Ni, Zn, Pb and Hg) from urban storm water was studied. Initially batch experiments were performed where the effect of pH, dissolved organic carbon (DOC) and dissolved ions on the adsorption efficiency was studied.

En ekonomisk hållbar växtodling i sörmländsk mellanbygd :

We have been looking at three different types of agriculture in Södermanland, in the middle east of Sweden. We call the different types for Intensive, Extensive and Mix. The purpose is to get an economic defensible plan for how to run different farm sizes. We also have been looking at the working hours and how many hours the different types will give. We have a farm called Taxinge Gods as our pilot farm. Taxinge Gods grow 407 ha land and is located 60 km southwest from Stockholm.

Effekt på mark och gröda av olika bearbetningssystem, med och utan CTF

Swedish agriculture has gone through big changes in the latest 60 years. The farm sizes have increased, which has led to raised tractor and machinery sizes and therefore increasing problems with soil compaction. A method to reduce these problems is to implement controlled traffic farming, CTF. All field operations are then concentrated to specific tracks by using GPS guidance. The aim of this work was to study how the tillage regime, with or without CTF, affects the soil, with the main focus on macroporosity. In Säby close to Uppsala, and Alnarp close to Malmö, randomized block trials has been carried out, and the data has mainly been taken from these trials.

MUSKULÄR STYRKA VID MULTIPLA REPETITIONER: : SKILLNADER VID STYRKETEST I BÄNKPRESS OCH LIGGANDE BÄNKRODD MED SKIVSTÄNGER AV OLIKA DIAMETEROMFÅNG

Introduction: A complex interaction between muscles, tendons, bones, joints and nerves are required for optimal function of the human hand. It is known that an individual?s grip strength is vital for performance of physical demanding tasks such as strength training with free weights. Strength training including a thicker grip around the bar may enhance the strength of the grip in the athlete without other special routines for grip strength development. The purpose of this investigation was to examine the difference in performance in multiple repetitions in two strength training exercises using two different sizes on the bar, to look for correlations between grip strength of the subjects hand and the amount of repetitions executed with two different size of the bar and finally the correlation of hand size and the amount of repetitions executed with two different size of the bar.Method: 15 strength training men (23,9 ± 4,1 years), underwent measurements of hand size, maximum grip strength, 1 repetition maximum (1RM), a 80 % of 1RM weight strength test with two different  bar sizes.Results: The results from the present investigation indicates a 21,1 % reduction of 80 % of 1 RM weight performance in repetitions executed in the bench press with the thicker diameter of the bar and a 66,2 % reduction in repetitions executed with a 80 % of 1 RM weight in the lying bench row with the thicker diameter of the bar.

Dragbrotschning av invändiga profiler

High-precision cutting in metal is very complicated, a lot of parameters affect the result: what geometries to be manufactured, surface roughness and tolerances to be achieved, batch size etcetera. When pull-broaching internal parts this might be even more important, than in any other cutting operation. Everything is machined in one single stroke and the general technology is built in to the tool, therefore big investments must be made to change the process. Milling for an example: one piece at a time is machined away, and a lot of parameters can be changed easily.It is very high pressure on the cutting-edge when the broach is cutting. To achieve the specified product and to avoid unnecessary toolwear it is essential to use the right cuttingfluid and the right cuttingspeed for an example.

Removal efficiency of perfluoroalkyl substances (PFASs) in drinking water : evaluation of granular activated carbon (GAC) and anion exchange (AE) using column tests, and the effect of dissolved organic carbon

Poly- and perfluoroalkyl substances (PFASs) are a group of environmental contaminants that have gained increasing attention due to their potential to bioaccumulate, environmental persistence and potential toxicity. PFASs have been found in surface water, sediment, air, soil, sludge and ice caps globally, as well as in wildlife and humans. Furthermore, PFASs have also been detected in drinking water, leading to raised concerns for human health, since drinking water is one of the most significant sources of PFASs for the general population. Conventional water treatment techniques have shown to be ineffective removing PFASs, highlighting the importance for further research to develop efficient removal techniques. The aim of this study was to investigate the removal efficiency of PFASs in water using two treatment techniques; granular activated carbon (GAC), type Filtrasorb 400®, and anion exchange (AE), type Purolite A-600. Additionally, the effect of dissolved organic carbon (DOC) on removal efficiency was studied.

Design och uppbyggnad av satsvisa och kontinuerliga reaktorsystem för anaerob teströtning

Detta arbete innefattar planering, uppbyggnad och inkörning av teströtningsanläggning för biogasproduktion, bestående av batch- och tankreaktorsystem. Arbetet inbegriper även utförandet av experiment, på batchreaktorsystem, som syftar till att ge en första inblick och vägledning för vidare studier kring optimering av processen med inriktning på tillsats av kolkälla och justering av kvoten mellan kol och kväve. Utifrån de resultat som erhållits vid försök på batchreaktorsystemet observerades en positiv effekt, gällande ökad nedbrytning av VFA, vid tillsats av glukos till systemet. Igångkörning av tankreaktorsystemet gav erfarenheter gällande handhavandet av anläggningen samt driftsäkerheten, vad gäller t.ex. återstart efter strömavbrott, loggning av gasflödesdata, pålitlig substratdosering och substratuttag utan syreläckage in i systemet..

Kemisk stabilisering av gruvavfall från Ljusnarsbergsfältet med mesakalk och avloppsslam

Mine waste from Ljusnarsbergsfältet in Kopparberg, Sweden, is considered to constitute a great risk for human health and the surrounding environment. Some of the waste rock consists of sulphide minerals. When sulphide minerals come into contact with dissolved oxygen and precipitation, oxidation may occur resulting in acid mine drainage (AMD) and the release of heavy metals. The purpose of this study has been to characterise the waste material and try to chemically stabilize the waste rock with a mixture of sewage sludge and calcium carbonate. The drawback of using organic matter is the risk that dissolved organic matter can act as a complexing agent for heavy metals and in this way increase their mobility.

<- Föregående sida 3 Nästa sida ->