This paper aims to describe the variation and develop a method to control the production for the product Metropol Kaktus from the snuff developer Fiedler & Lundgren. We are going to use the requirements from the product specifications as limits of the expected quality when we present methods to control the process. One method attempts to control during the process and the other attempts to maximize the number of products with strived quality before the process starts. Metropol Kaktus is a product produced with high quality, the mean weight is 20,023 gram and this is very close to the weight, 20 gram, which is reported in the product specifications. The variation in weight variable is less than what is reported in the specifications and the minimum weight is over the limit set by Livsmedelsverket.

An excessive input of nutrients to lakes and other water bodies has created a problem with eutrophication in Sweden. Untreated, or partially treated, domestic sewage is a major source for discharge of phosphorus (P), which is the nutrient most frequently responsible for eutrophication of most fresh waters and the Baltic Sea. The waste water can be cleaned by filter materials, which have a high P-retention ability and which after saturation may be used as fertilizers. Four potentially suitable filter materials were tested in batch- and column experiments in this study. In the batch experiments, the following materials were shaken with waste water in time series ranging from 5 seconds to 60 minutes: coarse (1-4 mm) and fine (0-2 mm) Polonite® (heated bedrock from Poland); Filtralite® (light expanded clay aggregates with limestone added before burning); water cooled blast furnace slag (BF-slag) and BF-slag mixed with 10% burned limestone.

Pulsatilla vernalis is one of several endangered plant species that benefit from wildfires and small scale disturbance events that repel competing vegetation and create open patches in the vegetation cover. Previous studies argue that Pulsatilla vernalis is decreasing in numbers due to vegetation changes associated with the decrease in wildfires, forest grazing and changes in forest management. In this study, 17 populations of P. vernalis were inventoried in order to examine if soil and/or vegetation structures affect the population structure of P. vernalis (i.e.

Brämhults Juice AB is one of Sweden?s leading producers of fresh fruit juices and drinks. The fruit drinks last 3 days once opened and when stored in a refrigerator kept at 7°C. Since factors that shorten the drinks? best before date are usually not noticed until the entire batch has expired, it would be advantageous to find a way to accelerate the drinks? natural deterioration, so that an unusal short best before date is noticed before more products are shipped off to the stores.

Brämhults Juice AB is one of Sweden?s leading producers of fresh fruit juices and drinks. The fruit drinks last 3 days once opened and when stored in a refrigerator kept at 7°C. Since factors that shorten the drinks? best before date are usually not noticed until the entire batch has expired, it would be advantageous to find a way to accelerate the drinks? natural deterioration, so that an unusal short best before date is noticed before more products are shipped off to the stores.

In the process laboratory of Metso minerals (Sala) AB, continuous tests have been made with a laboratory unit High-Rate thickener. The tests are made in order to compare three methods of thickening techniques of suspended solids. The three techniques are High-Rate thickening, conventional thickening and lamella thickening. The High-Rate and the conventional trials are based on a continuous method, while the lamella thickener is based on batch trials. Because the lamella thickener is based on batch trials and there were some optimization problems with the adding point of the flocculant at the continuous trials, it was not feasible to compare the lamella thickener with the other two thickener types.

This final thesis aim to create a support that can decrease the uncertainty when planning the cable drum flanges lines that produces cable drums in the interval 100 to 320cm in diameter at Vida Packaging in Hestra. The purpose attains through finding an optimal batch size that minimizes the total storage cost and order prime cost, without degenerate delivery capacity to the customer. Through survey the sale and stock balance development during 2005 and 2006 for cable drums in Hestra and give alternative suggestions how to plan the production after installing a new cable drum flanges line. The study also explores different ways of working during product change in existing nailing line, to minimize the order prime cost. Vida Packaging in Hestra is a part of the Vida group, which is Sweden?s largest privately owned sawmill group with seven sawmills placed all around southern Sweden.

Fuel pellets are in Sweden mainly produced from sawdust and cutter shavings. Before the pelletising process the raw material is dried to attain consistent moisture content and ground up in a hammer mill. In the densification process (pelletising) the ground material is forced through holes in a rotating die. This heats up the wood particles which cause them to soften and self bond. After the process the pellets are cooled, sieved and bagged. The milling process creates a wide range of particle sizes.

This essay examine the meaning produced around bodies and body fat in the queer community, but also in the surrounding straight community. The author has interviewed fat activists, and are using queertehory, to examine and analyze the relationship between body fat and the understanding and construction of sexuality and gender. The author concludes that even if norms around body shape and body fat are overlapping between the two contexts to some degree, they also differ. In the straight community, people with larger body shapes and sizes are punished, and encouraged to stay, or become, slim. However, in the queer community, ?fat? or bigger body sizes are not frowned upon in the same degree.

At ABB LV Motors in Västerås the shaft is assembled into the rotor with a shrink fit. After athorough investigation of the assembly method, several factors that make the insertion of theshaft more difficult has been discovered. Some affect the assembly directly while others onlyhave an indirect influence. The investigation has shown that the radial play between the shaftsouter radius and the rotors inner radius might be too small which could lead to anunsuccessful assembly. For the larger rotors, the condition is the opposite, and the rotor mightmove compared to the shaft direct after the assembly when the rotor still is warm.

Individual identification of pigs could be used in commercial herds for production monitoring, disease monitoring and breeding evaluation. This study investigates the possibility of using microchips designed for dogs and cats to identify individual pigs from birth, through rearing to carcass at the slaughter plant. Two different sizes of microchips, and two different ages of the pigs at injection were tested. Castrates and gilts from ten litters were evenly distributed between chip sizes and injection ages. All pigs were identity marked with both electronic ear tags and injected with microchips.

Most of the city of Uppsala rests on postglacial clay with a varying content of sulphur. The sulphur occurs naturally in the clay in reduced form as sulphide and the clay is for that reason usually called ?sulphide clay?. Excavation during construction activities gives rise to large amounts of excavation material, of which the sulphide clay is a considerable part.When the clay is exposed to air and water, an oxidation of the sulphides occurs which may produce an acid leachate and the mobilisation of heavy metals bound in the clay or underlying material. The aim of the work has been to improve our understanding of the behaviour of sulphide clays and produce a basis for risk assessment in the future handling of excavation material with high sulphide content.

A study of southern pudu (Pudu puda) was performed at the zoo Nordens Ark in Bohuslän, Sweden during twelve days in Mars and April 2014. Observations were performed during twilight. Time budget and enclosure use was examined, when the animals had access to the whole enclosure of 1000 m2 or a smaller part of the enclosure of 200 m2. There was almost no difference in time budget between the two enclosure sizes. At both enclosure sizes the animals spent most of the time at a place that was hidden from outside the enclosure. The hidden place was situated in the house.

The focus of this thesis is the group as a pedagogical tool. It investigates whether and how what is known of group size can help further schools in fulfilling knowledge and democracy goals and moreover how such knowledge can influence the principals? management. The mission of school education is to provide the basis for each pupil?s individual development and in the end it is pupils? individual performances which are graded.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.