More frequent and intensified rainfalls are expected to occur due to climate change in the nearfuture. This together with a higher proportion of paved areas increases the pressure on today?sstorm water systems (Risinger, 2014; Boverket, 2013; Stahre, 2006). Traditional storm watersystems (i.e. underground pipe systems) have during last decades started to be questioned(Olshammar & Baresel, 2012).

The purpose with this project is to explore and verify three renovating systems for Miljonprogrammet (common expression forbuildings constructed during the years 1965-1975 when over a million houses where built in Sweden) to take measure to thelargely transmission losses of these buildings. Many of the buildings from this period have similar constructions and thereforethe same techniques can be used to renovate several of them. This project only considers the climate scale, although thereare many more factors to concern for to efficient the buildings of Miljonprogrammet.This thesis presents examples of renovations carried out using two of the three renovation systems.The essay presents a reference house of choice on which we apply the three systems and calculate the new U-values,consumption of energy and the investment costs. The new U-values the building is given is matched to the values ofrecommendation for passive houses. Our reference house is a two story apartment building, located in the village ofLammhult, with brick facades at the ends and plaster at the long sides.

In the last couple of decades, corporate law firms have rapidly grown to become both influential and highly profitable corporations in the business world. Today, the largest law firms are assumed to bear far greater resemblance to large and often multinational public limited companies than the small businesses generally associated with legal services. However, one interesting specific set them apart from the majority of other companies; the partnership and its interrelated profit sharing. The aim of this study has therefore been to investigate partner compensation systems in corporate law firms and further examine what implications chosen compensation systems have on the organizations. Using a multiple case study, including 7 of Scandinavia?s largest and most well known law firms, the results show that partner compensation systems are highly individual and the critical question is whether to employ seniority based or performance based compensation systems.

Abstract Title: The Future of ABC at Sandvik Tooling ? Incorporating ABC with information systems in order to drive business development from a cost point of view. Authors: Jenny Andersson and Camilla Salomonsson. Supervisor: Charlotta Johnsson ? Department of Automatic Control, Lund University.

Test bench for air bearingsThis thesis work consisted of bringing forward and defining the test parameters relevant for a test bench and constructing a test bench that can test and verify the largest existing air bearings that are of use in Micronic Laser Systems AB machines. Because the knowledge about air bearings is limited it is thought that with the help of the test bench the knowledge would increase and in that way improve the air bearings.After learning more about air bearings and their purpose at Micronic Laser Systems AB, I started the concept phase for the test bench. For each part in the test bench I consulted my two tutors, Torbjörn Hedevärn and Johan Bergqvist, at Micronic Laser Systems AB. The final concepts where documented as 3D-modells in Solidworks and some of them have been tested in Solidworks FEM-program.The test bench is designed so that, with the help of a pneumatic cylinder, 25 kilo weights are placed on the air bearing to test its stiffness, damping and the pressure performance under its surface area. To test these parameters the test bench has to have a pressure meter, accelerometer and a microcator.

The aim of this study is to investigate which management control mechanisms evolve in companies that receive funding from Venture Capital companies and why the management control systems evolve in the way that they do. A case study was performed on three Swedish high technology companies, that all received funding from Venture Capital companies for the first time in 2006. Merchant?s framework, defining all management control mechanisms as either, results control, action control or personnel control, was used to structure the study. Results show that the companies that received Venture Capital all increased the use of management control mechanisms within results control, action control and personnel control.

The world is changing and the business context is no exception. One of the clearest tendencies is a tougher business climate with harder competition due to increased international trade and the expansion of the e-business. At the same time the customers are becoming more sophisticated and demanding. The last decades have also meant that tougher and more frequent demands are being aimed at the businesses from a wider variety of stakeholders; demands regarding how environmental issues, social responsibilities and business ethics should be dealt with. All of the above have driven companies towards implementation of different management systems to be able to cope with the demands as well as to ensure that these issues are being dealt with in an efficient and effective manner.

This study aims to investigate how small scale manufacturing companies reason around an implementation of a PLM-system, as well as the suitability of these systems compared to larger companies. The study is built on a qualitative method. Initially, secondary data was gathered through books, articles and reports. Primary data was gathered through four interviews. Two interviews were performed with PLM resellers, one interview was performed with a PLM developer, and one interview was performed with a small scale manufacturing company that opted to not implement a PLM-system.The results imply that overall differences between larger and smaller companies exist in regard to the need of PLM systems.

Today most ice rinks in Sweden use secondary refrigeration systems with a solution of calcium chloride and water as secondary refrigerant. Due to the large amount of energy such a system uses more efficient systems would be desired.An earlier study concluded in the possibilities of using carbon dioxide as secondary refrigerant with copper tubes as the loops in the ice rink. Since then 3 ice rink refrigeration systems has been built with carbon dioxide in copper tubes. Excluding the ones being direct involved in those projects there is still very little knowledge about how these system works. This study has been made primarily with the aim of adding to the knowledge concerning availability and cost and secondary to look at possibilities for improvement.A comparison between systems with carbon dioxide, calcium chloride respective ammonium solved in water has been made by using Decision Matrix.

The Ã…F Group is a leader in technical consulting, with expertise founded on more than a century of experience. They offer highly qualified services and solutions for industrial processes, infrastructure projects and the development of products and IT systems. They are also one of the leading names in certified third-party testing and inspection work.Today the Ã…F Group has approximately 4,000 employees. Their base is in Europe, but their business and clients are found all over the world.A part of Ã…F-Engineerings business is programming different automation systems to clients. Another part is support in both telephone and personal visits.Because the number of clients is high and the flora of different automation systems is big the consequence is that the employees must have access to many licenses with programming tools.

Ocean Thermal Energy Conversion, OTEC, is a sustainable energy conversion technology that is not yet commercialized. OTEC is a technology that utilizes the temperature difference in oceans between the warm surface water and the cold water at 1 000 m depth to run a Rankine Cycle. This technology can produce electricity and provide synergies like fresh water, air conditioning and aquaculture. A simulation program for three alternative OTEC systems has been created in order to decide which OTEC system is most profitable; closed, open or hybrid system. In this simulation a production cost analysis is performed in order to investigate and decide which one of the three systems that has the lowest production cost. The production cost analysis also analyzes if the profitability is affected by the size of the facility. After these analyzes, the most profitable of the three different OTEC-systems is expanded by an installation of solar collectors in order to see if the thermal efficiency is improved. The result shows that the most profitable system varies with the size of the facility.

In inhalation anesthesia life-support systems are used to provide gases to the patient and to monitor important parameters. These systems are used in dynamic and stressful situations where the information-load on the operators often is significant. This thesis presents a design concept of an anesthetic system. The design goal has been to keep the information-load on the operator low with the objective to minimize confusion and error.A number of contextual inquiries were made in the operating room during surgery at four hospitals in Sweden. The goal was to understand the actual use-situations when anesthetic systems are employed.

Modern IT systems tend to become more and more complex, while the number of active systems in companies increases. Furthermore, the number of security-related incidents is at an all-time high. These new conditions impose new demands on organizations. For example, it is no longer possible to manually collect and examine the systems log messages.The purpose of this thesis has been to make a comprehensive study of solutions for automated collecting and managing of log messages, analyze the Swedish Armed Forces specification for solutions for central log collection and management, and evaluating exis- ting solutions. The work consisted primarily of literature studies and evaluations of two of the Swedish Armed Forces of selected products: NetIQ Security Manager and Splunk.

The purpose of this literature review was to investigate how the rearing systems influence the behaviour of dairy calves. Calves are social animals that form groups within the herd where play and social licking between calves are important social activities. Suckling is a complex behaviour and essential for the calf's survival. In the modern rearing systems the calf is usually separated from its mother soon after birth. Calves are then kept in individual pens, group pens or, more rarely, with a foster cow.

Sweden is considered to have one of the world's highest animal welfare standards in agriculture. Despite this, there are shortcomings in animal husbandry. One example is overcrowding, which is a way to increase stock size without making costly investments in the buildings. It can be carried out systematically to increase profitability or due to, for example uneven calving during the year. The European Commission criticizes the fact that stocking density is not controlled under Swedish welfare inspections.