With the huge amount of computers connected to the Internet the IP-addresses are starting to run out. The Internet Engineering Task Force, IETF, have decided that it is about time to exchange the old 32 bits Internet protocol, Ipv4, to a more modern 128 bits protocol called Ipv6. This thesis explores the possibility to install Ipv6 in different operating systems. By testing various operating systems and by set up criteria compare them to each other we give the reader a picture of how the installation is done. We also show which operating systems to prefer if you want to use IPv6.

This master thesis has been done at Enea Epact AB. The purpose of this thesis is to develop and implement a Link Quality Control algorithm for GPRS/EPGRS in the current testing tool. A Link Quality Control (LQC) shall take quality values from mobile stations and base stations and decide a codingsscheme that opimizes the throughput of data. The Advantage with LQC is that it adapts the used coding scheme to the channel quality. If the channel quality is too bad for the used coding scheme, a slower coding scheme with more redundancy should be selected.

This thesis describes a further development of an existing prototype named Automatic pin bone remover. The further development was requested from the Swedish consulting firm ATM AB. The request of automatic pin bone removers is high and has the potential to be a worldwide leading product.The goal with the thesis work is to further develop an existing prototype. In order to achieve the goal a pre-study of the prototype had to be made in order to define a customer demand specification. The thesis work is then continued by a function analysis which differs from a conservative one.

Systemutveckling har på senare år rört sig mot allt mer flexibla metoder för att bedriva utveckling, ett agilt förhållningssätt vid systemutveckling i dagens IT-bolag är inte alls ovanligt. I takt med förändring av tillvägagångssättet har även ett moment inom testningen fått allt mer fokus: Testautomatisering. Vissa författare hävdar till och med att det inte går att bedriva agil systemutveckling utan att införa testautomatisering. Syftet med uppsatsen är därför att undersöka vilka utmaningar en testare inom de agila metoderna stöter på vid testautomatisering. Detta utförs med hjälp av intervjuer på fem olika företag av fem olika testare där de alla har en gemensam nämnare, att de jobbar agilt..

Welding is a common method for joining of metal or plastic construction parts. This report describes several different weld methods in general terms. The report focuses on the GMAW method, specifically MAG welding.A case study has also been performed for the company Wenmec. The task received from the company was to compare the mechanical properties of joints welded with the tube electrode called Nittetsu SM-3A and joints welded with the homogenous electrode called ESAB Aristorod 12.63. Both types of weld joint were welded with the MAG method with an Argon based shielding gas with 18% CO2.

The purpose of this study was to investigate the possibility of streamlining the test process by utilizing pair programming. During the process, pair programming has been practiced as is defined by the Extreme programming (XP) software development methodology, with the other aspects of XP discarded. The focus of the testing itself has been toward unit testing. The methods applied has been with an experimental approach where 93 cases were attempted to be solved by either single programmers or pair programmers. What has been investigated in these experiments was the time needed to complete a case, how many test attempts were needed to solve the case, and how high a percentage of the cases were solved.

The present research examined both automatic and controlled processes in newpapers ability of priming racial stereotypes via the portrayals of people of foreign extraction. The automatic process were examined through articles which; a) involved an illegal act or b) the act was not illegal but morally questionable. Swedish-born subject?s explicit opinions against foreign people were also measured through ?The Modern Racial Prejudice Scale?. In the experiment participants read four different articles which included; Swedish person/noncrime, foreign person/noncrime, Swedish person/crime and foreign person/crime.

The objective of this study was to assess validity and reliability for five different owner-completed instruments evaluated to assess chronic musculoskeletal pain in cats. All of the instruments were questionnaires, three asking about behavioral changes, one about the degree of pain and one about quality of life. One of the instruments was written originally in Swedish, the other four instruments were translated into Swedish before use. Data available were records from 57 cats with no signs of pain and 11 cats with different pain-related diagnoses. The diagnoses were ensured by clinical examination including palpation and manipulation of joints, gait testing on a force-plate and X-ray scans. Instrument 1 was completed by 57 pain-free and 11 pain-affected cats.

This thesis presents a system which has been implemented to satisfy a need in theresearch on how speech planning interacts with syntactic and prosodic structure inspontaneous speech. The long-term purpose of the research is to provide models forautomatic parsing of spontaneous speech and for psycholinguistical modelling of speechproduction. Identification of inhalation pauses is an important step in the developmentof automatic methods for spontaneous speech parsing.Identification of inhalation pauses is considered to be a keyword-spotting speechrecognition problem. Hybrid HMM(Hidden Markov Models)/ANN(Artificial NeuralNetworks) approach is applied to this problem. Method gets 90,8% in Recall, 66,4% inPrecision and 76,7% in F-score.

This paper is a research review in the realm of censorship systems andfiltering systems. It applies ethical considerations to the creation of censorshipsystems bringing forward discussion on the ethics of technology with thepurpose of limiting access to information.There is active research being done in the area of automatic content filteringand censorship systems. These are systems that can filter out undesiredmaterial, typically from the Internet, automatically. Used in some nations,many schools and even mandated in some libraries there are many ethicalquestions raised concerning censorship and access to information.Part of the review concerns the level of accuracy of these systems presentedby researchers in the field and the different approaches used. Reviewedarticles centre around automatic content classification and filtering ofpotentially harmful materials with regards to minors while some relate tocensorship technology in a wider sense.Results show a general lack of discussion concerning the ethics of thetechnology in the research reviewed.

Automatic query expansion has long been studied in information retrieval research as a technique that deals with the fundamental issue of word mismatch between query and document. The purpose of this thesis is to compare the retrieval effectiveness of different strategies for automatic query expansion. The strategies are based on local analysis of the corpus and use statistical information from the local document set to extract terms that suppose to adapt themselves to each individual search and therefore appear to be searchonyms to the index terms. The strategies compared are: association clusters, metric cluster and scalar cluster. Baseline queries of 24 topics are expanded using terms from the different clusters and searches are made.

The report examines the factors which may be a contributing cause to the problems that are present when ferritic stainless steel are eddy current tested in a warm condition. The work is carried out at Fagersta Stainless AB in Fagersta which manufactures stainless steel wire. In the rolling mill there is an eddy current equipment for detection of surface defects on the wire. The ferritic stainless steels cause a noise when testing and this noise complicates the detection of defects.Because of this, a study was made of how the noise related to factors such as steel grade, temperature, size and velocity. By observing the signal and with the possibilities to change the equipment settings the capability to let a signal filter reduce the noise level were evaluated.

Automationscenter & Bråvalla Elteknik AB is a company that offers the market completed total solutions where the customer can operate and monitor their production from the terminal. In these total solutions they lack standard circuit which are developed by the company and which could manoeuvre/control/monitor controlled process objects. This report defines the work of developing the most common standard circuits.The report is initiated by a short theoretical part about PLC and the PLC system, with a connected terminal, which has been used. Thereafter, the turnout of the demands of specification is reported, after discussing with the supervisor in the course of the project. The report concludes with a disclosure of how the programming, the documentation and the testing have proceeded and a final discussion concerning the project and proposals on continuation.The result is a CD with the documentation of standard circuits and how they are implemented in a new project.

The decomposition of organic carbon in drained peat soils is a major source of carbon di-oxide in Sweden. A big part of these drained peat soils are used in agriculture and it is a big challenge to slow down their decomposition. It has earlier been thought that less tilling and higher water table levels would decrease the activity of soil microbes and thereby the decomposition, but recent experiments has showed that this has little or no effect. In this bachelor thesis a field experiment was made on drained peat soil with ley, outside Björklinge, Uppsala municipality, Sweden. The experiment was carried out in May 2011. The objective was to develop a method to examine how the net exchange of carbon diox-ide from plant covered peat soil is affected by temperature and photosynthetically active radiation (PAR).

Most often when developing a new system there is a need get a functioning testtool up and running. Including time, cost and resources the solution isn?t always obvious, developing your own or buy one ?of the shelf?. The purpose of this thesis is to study how a general testtool for executing functional tests should be designed to be reusable, be based on recognized knowledge and be able to fast and simple be customized for different types of systems. Key functions from the litterature is presented and used in the design of a testtool prototype.