In Sweden, lowest acceptable haemoglobin levels in blood donators are 125g/L for women and 135g/L for men for a test sample taken in the beginning of the blood donation. Levels, which are 10g/L lower, are accepted if the sample is taken after the blood donation. Earlier studies show that the haemoglobin level decreases for a person that is lying down.The two aims of this study were to examine how much the haemoglobin levels change during blood donation and to examine if the photometrical instrument Pronto-7TM shows equivalent results to that of the established method Cell-Dyn Sapphire.In the study, 120 blood donors participated. Blood samples were taken in the beginning and in the end of the donation. Analyses by Pronto-7TM were done before and after the donation.The haemoglobin level decreased significantly during the blood donation.

In this thesis a possible cost effective runner change of some of the units in the hydroelectric power station Olidan is investigated. The possibility to drive a unit at the same efficiency point through a change of the turbine shaft speed and the rate of discharge is tested. Furthermore the theories behind model testing, determination of efficiency increase from model to prototype and efficiency measurements shall be discussed and analyzed with Olidan as a starting point.A predicted curve has been built on information from model tests and field measurements on the existing runners and runner data from the test of the new model. The predicted curve shows the difference in efficiency between an existing runner and a modern one. It is the difference in efficiency that is used in the calculations that are to show whether changing to a pair of new runners will be cost effective or not.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

This thesis aims to examine the possibility of understanding social change by using new institutionalism approaches on a specific case, The case, which describes the implementation of new public management reform in the Swedish health care system, is analysed from two separate new institutionalismperspectives; the tool perspective and the symbol perspective. These approaches differ from one another in the sense that the first relies on a rational choice ontology, while the latter rather refers to a sociological tradition. In the analysis, causal explanations as well as aim related explanations are presented. Formative moments such as economic stagnation, non-socialist governments and ideological isomorfism are presented as important factors behind the reformation. By using the tool perspective, the motives of the idea spreading and reformation of the Swedish health care system, are connected to a strictly rationalbasis such as cost efficiency and quality improvements.

Sweden's drinking water quality is considered to be high partly due to a high quality of the raw water and a well developed sewage infrastructure. Despite this, there is water contamination that could be prevented by installation of a sophisticated early warning system. Some of the major players in the production of drinking water have already invested in different types of early warning systems to ensure drinking water of high quality. There are various forms of early warning systems where automatic monitoring of E. Coli is an interesting alternative.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

This thesis considers the development of the software for an, newly developed, embedded real-time control system, based on a Periferal Interface Controller (PIC). The control system is developed to be used for several different applications. In this thesis work, software for two different applications are developed. The first task is a time controlled system, while the other task is implementation of aPI-/PID-controller. A user interface is also developed and implemented.The time controlled system is an automatic horse feeder, which is used for feeding horses at certain predefined points in time.

This thesis aims to develop a theory in the under researched field of international comparative cultural policy studies. lt does so by combining theories from the fields of political scienceand cultural studies, researching how and to what extent the concepts of culture of different states have an impact on the way cultural policies are constructed.The thesis uses this theoretical development in order to research a specific problem, namely the perceived possibility that Swedish and German cultural structures are slowly converging. Two recent official policy documents from each country are the objects of study. Through comparative idea analysis and with Michiel S. D Vries theories on decentralization, the thesis explains the convergence between the countries by differing cultural views between them.

NMD 100 is a notes and media dispensing machine, manufactured by De La Rue Ltd, located in Flen, Sweden. The customers, mainly bank offices, have expressed a need for a more comprehensive description of errors occurring from time to time in their machines. In order to acquire a BSc-degree in Computer and Electronics Technology at the University of Linköping I have carried out a diploma work, regarding new computer programs to fulfil the customers? wishes. The machine NMD 100 is connected to its PC through handshaking.

Within system development users have rarely been involved or received much attention during the development. Most of the times, the primary focus within system development lies on insuring functionality, rather than making the system usable. The literature specifies that a non user-centered approach can contribute to a product with low usability, which can lead to an ineffective and unsatisfactory experience for the end users.The purpose of this thesis is to begin an investigation to see if the use of non user-oriented system development methods is a possible cause of low usability in the final system.To achieve the purpose of this thesis, we have conducted a case study. Within the case study we examined the usability of a time reporting system. The case study included seven minor studies; an investigation concerning the development of the system, an expert evaluation of the system, interviews and observations of users, developed paper prototypes and executable prototypes, both which user testing was performed on.The result of this study shows that by working with user-entered methods, the usability in the time reporting system increased after the design had been revised.

This master thesis is intended to give an increased understanding of the stress state in an axle, which is assembled in one of Atlas Copco?s mountain drilling rigs. The main problems investigated were how the axle is affected when the bearing is worn, when the pretension is varied, and how to dimension the axle. Answers to these questions were found by using hand calculations, practical testing and with Finite Element analyzes. The dimensioning of the axle is currently based on the bending stress, but the author?s opinion is that the axle should be dimensioned considering the equivalent stress.

Automatic rumination measuring can be applied as a health indicator in dairy farming but is also highly desirable for research purposes. This study aimed to validate the technical functionality of the product RuminActTM, which employ acoustics to monitor rumination duration. The time budget of high yielding cows was studied and possible differences in rumination time between 13 rations were interpreted. Further the study examined what affects daily rumination and rumination efficiency. The validation was performed with direct observations that were compared to the automatically recorded rumination durations.

Sweden is the country that has got the largest amount of elderly in the adult population in the world. The physical activity level decreases as we grow old and we experience muscle mass loss and a bone density reduction. This leads to an increased risk for falls and subsequent fractures. The purpose of this study was to investigate whether an exercise program could affect muscle function and balance ability to prevent falls. 17 women (age 64-79) participated in this study and was assigned to a control group (n=7) and an intervention group (n=10).

This Independent work is about testing a method to create meaningful learning and a deeper comprehension in matter of basic hairdressing techniques. I got the idea for this method by reading literature related to my education to become a teacher for hairdressers, the new schoolreform and from my own experience of a teaching method that I saw an opportunity to develope. My teaching method was based on first teaching the pupils the basic techniques, and then give them an assignment were they were to find out their own final result by using a picture for inspiration. They were given an assignment description with certain frames but with freedom of choice how to get to their own final result. By making a job description and a headdrawing to show how the work should be done, and during the process try different ways to achieve the best result, my idea was that a deeper understanding and a feeling of meaningfulness would appear.The result shows that the pupils by freedom within frames experienced meaningful learning and thereby deeper understanding when it comes to basic hairdressing techniques.

AbstractManagement is a field that started getting attention in the beginning of the 20th century by Frederick Taylor. His publication is called the Principles of Scientific Management and is based on the principles of using scientific methods to find the best way of conducting each operation within a production facility. Many of Taylor?s principles may appear obsolete today but the matter of an effective material flow is still highly current. Efficiency is the relationship between the input into an operation and its result.