Sökresultat:
790 Uppsatser om Automatic testing - Sida 14 av 53
Datorbaserad bedömning i språk forskningsläge, erfarenheter och implikationer
To support uniform and fair assessment of Swedish students? English language competences, mandatory National tests are provided both for secondary and upper secondary education. The current thesis may be seen as a contribution to the further development and validation of these tests, with regard to the likely introduction of computerized testing methods. The aim is to gain further knowledge from current research in the field, to study and elucidate international experiences of implementation, and to gather and analyze feedback from students and teachers. Based on my findings, some tentative conclusions will be drawn, and recommendations made concerning future developments.
Automatisk och manuell anestesijournalföring / Automatic and manual anesthesia record keeping
Slutsatsen av studien, som baserar sig på 11 vetenskapliga artiklar, blir att AIMS
ökar patientsäkerheten samt bidrar till att tillförlitligheten och kvalitetssäkringen av
anestesiologisk dokumentation säkras. Denna slutsats baseras på de gemensamma
faktorer som framkommit i resultatet av de artikelgranskningar som genomförts
inom ramen för studien.
De olika faktorerna är:
? tiden som den anestesiansvarige lägger ned på dokumentation
? brist på korrekt och tillförlitlig registrering av vitala parametrar i
anestesijournalen
? utslätning av hemodynamiska värden för att uppnå en försköning av
anestesijournalens utseende.
? artefakter
? hjälpmedel vid riskanalyser
? mera korrekt och objektiv rapportering av patientens hemodynamiska data
? utbildning..
Tillförlitlighet för automatiska sprinkleranläggningar - en analys av befintlig statistik
In this report statistics concerning the reliability of sprinkler systems from seven countries has been analysed. The objective of the report has been to determine the reliability of sprinkler systems in Sweden and to present suggestions on measures to increase the reliability. The main conclusion that has been drawn is that the reliability of sprinkler systems in Sweden is 92 percent according to the analysis of Swedish statistics, and that this figure finds support in statistics from other countries. Further results are that the quality of design, installation, maintenance and inspection of sprinkler has to be improved and that the Swedish incident report has to be revised..
Metodjämförelse mellan instrumenten Vitros 5,1 FS och QuikRead CRP för analysen P-CRP
In studies of serum, in the early 1930s, from patients with pneumonia, a factor was found. It could agglutinate certain pneumococcal species. This factor, which later became known as C-reactive protein (CRP), increased sharply during the early and middle stages of the disease. CRP was identified as an acute phase protein and found especially in bacterial infections. CRP is synthesized in the liver by stimulation of interleukin 6 (IL-6), which is produced by the monocytes, and consists of five non-covalently bound subunits.The aim of this study was to compare two different analytical instruments (Vitros 5.1 FS Ortho-Clinical Diagnostics and QuikRead CRP Orion Diagnostica) for CRP analysis.
Logistikcentra
International Marine Group, IMG AB, was established in year 2000, and became the parent company of the three sister companies, Momec AB, Isolamin AB and Premec AB. The IMG ? group supplies complete marine/offshore interior accommodation and tailor-made system supplies to the Building/Industrial sector. With a starting point to develop IMG AB?s logistic and distribution the company has decided to survey the present logistic at their subsidiaries, mainly concentrated on the goods for delivery.
Usability i relation till Likeability : Ett nedslag i en designprocess för en webbproduktion
This report examines the relationship between usability and subjective judgmentsabout aesthetic and emotional aspects of users of a web production. Through thedevelopment of two prototypes that reflects different aspects of usability and subjectiveassessments examined the consequences of a differentiation of the concepts andUsability and Likeability. Thereafter, an evaluation of the two prototypes are madethrough user testing. Finally, the results of the evaluation is presented and are relatedto the concepts of usability and likeability. .
Helautomatisk växling av svetspistoler med en industrirobot
Rapporten beskriver ett examensarbete genomfört på uppdrag av Motoman Robotics Europe AB i Torsås. Uppdraget gick ut på att hitta en lösning för att helautomatiskt kunna växla svetspistoler med en Motoman HP-20 industrirobot. Projektet har i första hand varit ett utvecklingsarbete med fokus på en fungerande praktisk lösning. Arbetet har fortskridit i nära samarbete med och handledning av konstruktörer på företaget samt stöd från vår lärare. Resultatet har blivit en kompakt och estetiskt tilltalande konstruktion som uppfyller kraven som uppdragsgivaren ställt..
Produktutveckling av komfortlösning till lastbilshytt
This report describes a project carried out in cooperation with Klippan Safety AB. The purpose of this project has been to develop a product that facilitates the living area in a truck cabin for the customers. To be able to develop, in a structured way, that kind of product, the project has been based on different product development theories. The project contained of following parts: marketing research, product generation, product evaluation and prototyping. After information from the marketing research and discussions with the company, the decision was made that the task was going to consist an improvement of the existing product referred to as 'the comfort module'.
Analys av leksaksrobot, skapande av monster
During spring 2009 a three meter tall and laughing robot was developed in collaboration between Royal Institute of Technology and Royal University College of Fine Arts. The robots function and esthetics is based on an existing toy robot called Elmo. Elmo is 30 cm tall but now the goal was to make it 1000 times bigger in order to present it on the spring exhibition of Royal University College of Fine Arts. Due to only four months of developing and building time a demand of fast determination and good planning was required. In order to make a good structure for the project it is divided into five phases: Analysis of Elmo, planning, concept development, detail construction and finally product development and testing.In the first phase valuable knowledge is obtained according to the movements and geometry of Elmo.
Kilhus i plast : Omläggning av stålprodukt till produkt i plast
AbstractOur bachelor degree thesis was carried out in collaboration with Ivar Petterssons Järnmanufaktur AB in Smålandsstenar. We were asked to replace their wedge housing, used to fasten the wires to the power lines, with a similar structure in a plastic material. The idea for this project started with Ivar Petterssons Järnmanufaktur AB having problems with the casting quality that forced them to perform expensive tests on each of the wedge houses to ensure the quality. They are currently produced in China which is also a major drawback because it requires expensive long delivery times.The method we used is Fredy Olsson's Princip- and Primärkonstuktion (1995). We have consistently been in the project on so-called "broad front", which means that you create several sketches, ideas and changes in parallel, and then evaluates all.
Diesel Dubbelbränsle Teknologi
The work covered in this report includes a literature study of the diesel dual fuel technology(hereinafter referred to as DDF). The literature study covers earlier work that has been doneregarding the use of compressed natural gas (CNG) and diesel in a DDF system. Moreover a onecylinder research diesel engine was fitted with a CNG fuel system for experimental testing. Theinstallation of the engine and the test cell is described. Results from the tests are presentedcovering emissions, heat release and pressure traces from the DDF-concept.During the literature study it was found that most research was related to heavy duty dieselengines.
Betesdrift vid automatisk mjölkning i ekologisk produktion :
An automatic milking (AM) system should be combined with some form of controlled cow traffic to minimize the time spend on fetching cows to milking and to increase the milking frequency. By restricting the hours spent on pasture per day you optimise the AM system use during pasture period. A reason for this is becuase cows do not return to the stable for milking during night which cause that the milking unit stands empty those hours. In organic production it is required that the cows should be able to graze a certain amount of daily dry matter (DM) intake on the pasture. In the county of Dalarna where the farm is located the yield of the pasture is about 3000 kg DM per grazing season and hectar.This means that the pasture area should be 14,25 hectare to 57 milking cows.
Ungdomars förhållningssätt till cannabis - En kvalitativ studie med fokusgruppsintervjuer i en västsvensk kommun
Introduction: The current research shows that cannabis use is increasing, while alcohol use is decreasing in many countries. The reason for the increase is considered to be the increased availability and that adolescents attitudes towards cannabis has become more liberal. Aim: This qualitative study aimed to examine adolescents attitudes and knowledge about cannabis. Methods: Data has been collected from focus group interviews with adolescents aged 15-18 years, in a west Swedish municipality. Participants were recruited through visits to secondary and upper secondary schools.
Tal till text för relevant metadatataggning av ljudarkiv hos Sveriges Radio
Tal till text för relevant metadatataggning av ljudarkiv hos Sveriges RadioSammanfattningUnder åren 2009-2013 har Sveriges Radio digitaliserat sitt programarkiv. Sveriges Radios ambition är att mer material från de 175 000 timmar radio som sänds varje år ska arkiveras. Det är en relativt tidsödande process att göra allt material sökbart och det är långt ifrån säkert att kvaliteten på dessa data är lika hög hos alla objekt. Frågeställningen som har behandlats för detta examensarbete är: Vilka tekniska lösningar finns för att utveckla ett system åt Sveriges Radio för automatisk igenkänning av svenskt tal till text utifrån deras ljudarkiv? System inom tal till text har analyserats och undersökts för att ge Sveriges Radio en aktuell sammanställning inom området. Intervjuer med andra liknande organisationer som arbetar inom området har utförts för att se hur långt de har kommit i sin utveckling av det berörda ämnet. En litteraturstudie har genomförts på de senare forskningsrapporterna inom taligenkänning för att jämföra vilket system som skulle passa Sveriges Radio behov och krav bäst att gå vidare med. Det Sveriges Radio bör koncentrera sig på först för att kunna bygga en ASR, Automatic Speech Recognition, är att transkribera sitt ljudmaterial. Där finns det tre alternativ, antingen transkribera själva genom att välja ut ett antal program med olika inriktning för att få en så stor bredd som möjligt på innehållet, gärna med olika talare för att sedan även kunna utveckla vidare för igenkänning av talare.
Glowtest Fixture
The project, Glowtest Fixture, has been carried out to and in collaboration with MSA SordinLtd. MSA Sordin Ltd produces and sells ear protector and is at present a supplier on theworld market. Glowtest Fixture is a product for glow testing off detailed components in oneear protector. MSA Sordin Ltd sends today away your products for testing what is anexpensive aspect in their development. The project's aim is to take forward a test equipmentthat copes with those high nonplussed requirements and wishes that are required for anapproved physical execution.Glowtest Fixture is a physical equipment that comes used stem glow physical off all detailedcomponents in one ear protector.