Six different Digital Proofing Systems from three different techniques have been evaluated as totechnique, printing quality, economy and usability. Digital proof from two paper qualities, coatedand uncoated, has been compared with references printed in offset, to see how good they match eachother. Only two Proofing Systems manage to print on reference paper. The other Proofing Systemsuse special paper for digital proof.Measurements and visuell judgement show that the Digital Proofing Systems visualise referencepictures with quite good quality. Proof optimised for coated paper visualise the colours with goodresult.

Automatic trimmerhead is an examination project for making an automatic trimmerhead for grass trimmers with the user and functionality in focus. Our perception is that a happy user is a user who can pick up his or her trimmer, use it and put it back to its place when the job is done. It should not be necessary to interrupt work and perform maintenance on the machine just to make it work as promised.The project has been made in collaboration with the company Husqvarna, which is one of the biggest actors dealing with garden machinery on the market. Together we determined the project goal, ?To invent, construct and test a brand new concept for how an automatic trimmerhead can look and function?.At this day there are several different automatic trimmerheads on the market, both semi and fully automatic.

Investment costs for eight different type housing systems for dairy cows has been calculated in order to compare the building costs as a function of herd size, shelter type and automatization. A commercial calculation programme for building was used and complemented with prices of equipments specific for dairy cow building. Herd sizes were 120, 250 and 400 cows. The milking equipments were automatic milking system (AMS), parallel parlour with 32 stalls (2x16) and rotary parlour with 24 stalls. Shelter was either insulated equipped with automatic cable driven scrapers on solid alleys, automatic feed wagon on rails, or uninsulated with manual manure handling and a tractor driven mobile mixer wagon on a drive-through feeding table. Building cost per cow or per kg milk was calculated using an average life time and 6 % interest rate and annual milk yield is 9 500 kg/cow and year. Structure effect 3-4 % higher for an insulated structure than in an uninsulated for 400 and 120 herd respectively. This is much lower compared to what is normally argued.

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.

The purpose of this literature review was to investigate how the rearing systems influence the behaviour of dairy calves. Calves are social animals that form groups within the herd where play and social licking between calves are important social activities. Suckling is a complex behaviour and essential for the calf's survival. In the modern rearing systems the calf is usually separated from its mother soon after birth. Calves are then kept in individual pens, group pens or, more rarely, with a foster cow.

Milkability or ease of milking, has higher importance today for Swedish dairy cattle producers after the introduction of milking parlours and automatic milking systems. Milkability is the cow?s ability to quickly milk out and be completely milked. There are several measures of milkability available. Today the farmer measures the traits subjectively in relation to the conformation scoring of the cow 30-270 days after her first calving.

Since long, Sweden has had exceptionally low calf mortality compared to most other countries. The tradition has been to keep calves in individual pens. With increasing number of cows per herd there is now a larger interest in more efficient and economical group systems for housing calves. However it has been noticed that bigger herds have more health problems and higher calf mortality than smaller herds. The early signs of disease are harder to detect when the animals are not fed manually.

The trend in milk production is similar in Sweden and across the world; the farms are getting fewer but increasingly bigger. The costs for hiring workers are increasing, which results in more cows per animal keeper. Sensors can then be a great tool for keeping track of animals which need special attention. With a reported decreasing fertility, sensors that can detect oestrus even at low levels can be especially helpful in bigger herds to pinpoint the cows that may be in oestrus. The number of farms with dairy cows that install AMS, Automatic Milking Systems, are increasing, and that also increases the need for sensors to control milk quality and composition when there is no visual control of the milk by a milker before milking starts.For the sensor data to be useful you have to have software designed to analyze and interpret the data to get relevant information that the farmer can use.

This report deals with an exam report written by Olle Hjalmarsson and Thomas Likar, students at Högskolan i Halmstad. The project was carried out for Haldex Traction AB in Landskrona whose business consist of manufacturing automatic all wheel drive systems (AWD-system). These systems consist of a plate clutch which activates all four wheels of a 4-wheel driven vehicle. An important component in these clutches is the accumulator which basically consists of a piston under the load of a spring which creates an oil pressure with the help of an electric motor used for actuating the clutch.At Haldex difficulties has been experienced regarding the assembly of the accumulator parts due to the small tolerances between the piston and the hole of the accumulator in the cast aluminium housing. Attempts have been made to assemble the parts in existing robot cells.

This thesis examines what automatic indexing and genre classification may bring to fiction. The thesis studies five theorists of the subject to find out what the biggest problems are concerning fiction indexing. The thesis also investigates which automatic text analysis methods that can be effective for automatic indexing and genre classifying fiction. To show that it is possible according to philosophy of language to index fiction, in particular to automatically index it. Wittgenstein?s, Barthes? and Ricoeur?s language and fiction theories are presented and used to problemize the subject.

The impact of computer programs in safety-critical systems has increased in the past decades and computer-based systems can now be found in a wide range of applications. A new approach for developing dependable systems is documenting all design rationale that affects safety using Intent Specifications. A recent approach for developing complex systems efficiently and in an upgradeable manner is Component-Based System Engineering. In this thesis, these approaches are combined in the development and upgrade of a Remote Robot Control Unit by using the tool SpecTRM. The case study showed that Intent Specifications and CBSE could successfully be combined.

Automatic milking systems (AMS) have been in commercial use since 1992 and have since 1998 increased a lot. The objective of this study has been to examine the development of udder health on farms converting to AMS. The study also included a comparison of how udder health developed depending on how farms handled cows with mastitis. This was because farms choose to either milk cows with mastitis in a separate barn or in the milking robot. Other studies on udder health on commercial farms have shown that somatic cell count increases both among individual cows and in the bulk milk when converting to an AMS. No differences between before and after converting to AMS in the proportion of cows treated for mastitis can be found in the literature.

One of the aims of this report has been to make an inventory of the building trade market to see which document handling systems that are available. The secondary aim was to document the users´ demands on the systems and other demands such as quality assurance. After this, the document handling systems Byggnet and Lotus Notes, which are rather complex systems, have been analysed. Finally a recommendation has been made. In the inventory of the marketthe internet has been used because it is there the latest information can be found.

Systems development methods mirror different organizational perspectives, and not all methods are formalised, but what they have in common is the purpose of structuring and supporting systems development processes. Which method would be the most suitable may be determined by the systems development context at hand, because every systems development context is unique. Information is a valuable asset in today?s organizations, and it needs to be protected against both internal and external security threats. In our essay we aspired to find and present suggestions as to how systems developers can include security in the very design based on formalised systems development methods to create systems that are better prepared to meet the security challenges of today.