Telia Telesvar is an automatic anwering machine that is provided in your stationary telephone at home. The drawback of this is that you cannot see if anyone has called you. This report describes how a terminal for Telias Telesvar could be designed. Telesvar terminal will show in a display if anyone called you and show the incoming number. It will also play the spoken message in a built in speaker.

The work presented in this report is written at IEIs department on Linköping Institute of Technology. The report aims to increase the assembly efficiency at Wigells AB. The report shall be used as a guide for the implementation of changes at other workstations in the company. Together with Träcentrum in Nässjö, Wigells AB has identified the needs of this study and contacted IEI at Linköping Institute of Technology.In order to implement an efficient assembly line at the company, studies on lean production have been made. This theory has been studied and together with our own views and findings at the company we have analyzed the assembly area.Wigells is a small company that manufactures wood furniture.

During 2006 an estimated number of 150 persons are supposed to have been killed in road accidents caused by speed limit violations. Through Automatic traffic security control (ATK) the Swedish road administration (Vägverket) is working towards lowering the number of speed related accidents. By placing the speed cameras on roads they've managed to lower the average speed at those places. The enlargement of the number of speed cameras is based upon knowledge about for example how high the risk is for speed related accidents on the roads. The speed cameras always measure the speed in which every vehicle passes, but aren't constantly activated to register speed violations.

Developments in milk production are heading towards fewer but larger herds where the milking process is often fully automated. Automatic milking systems were launched in the 1990?s and in the year 2010 the Automatic Milking Rotary (AMR) was introduced. As a rule there are no supervision personnel present during the milking event in systems with automatic milking. This means that there is a risk that cows can be incompletely milked in one or more udder quarters, for example if the robots fail in attaching the milking cups or if the cow kicks off the milking unit.

A new system of public transportation that can simplify and shorten the trips made throughout the city, anddo that both cheap and environment-friendly. Sounds like good news. This new system, though, require anall new type of infrastructure, differing from what we are used to see in our cities. Podcar, or PRT, as thesystem is called can become a transport revolution, possibly. If that revolution does happen it is crucial that webeforehand have studied the possible effects it can cause on our city environment, from a spatial point of view.This thesis thoroughly describes the function and essence of the PRT system and presents what is availabletoday and in what forms.

Integration av system har varit ett aktuellt område under de senaste åren. Det har då främst handlat om integration av system internt på företag. En av anledningarna till det stora intresset av web services är möjligheterna att integrera olika system, exempelvis stordatorbaserade och Windowesbaserade system med varandra. Web services handlar om att kunna integrera system, både internt på ett företag och externa mellan olika företags olika typer av system. Allt detta görs via Internet och bygger på att man utgår i från standards när man bygger web services.

Uppsatsen undersöker den svenska marknaden för CRM-system utifrån faktorer som företagskategori, kundrelation, befintligt kundrelationsstöd m.m. Vilka funktioner i ett system som företagen uppskattar mest undersöks också samt hur faktorer typiska för mjukvara påverkar situationen.Resultaten visar att det finns ett behov bland små och medelstora företag för CRM, dock inte för alla företag. Många företag använder egenutvecklade system, kanske för att de kommersiella systemen inte motsvarat deras behov. Funktionsmässigt uppskattades grundläggande funktioner mest, och fördelningen mellan CRM-områdena var jämn. Gällande mjukvarukaraktäristik ser företagen funktionaliteten som den primära faktorn i deras val av CRM-system.Det är en klar fördel att kunna erbjuda ett system på det nationella språket..

This document is a summary of my work to create a project management system for a small firm working with computer graphics. The intention is to manage customers, projects, images and invoices in the easiest possible way. To make the system as flexible as possible a web-interface was chosen which makes it possible to access the system from any computer, making it independent of any particular operating system. The only requirement on the user environment is that the computer must have a connection to the Internet to be able to access the system. The different techniques that have been used to develop the project management system is primarily Ruby on Rails and a MySQL database. Although Ruby on Rails was completely new to me, I decided to use this framework instead of PHP, which I already have a good knowledge of, because of the benefits Ruby on Rails provide.

Within system development users have rarely been involved or received much attention during the development. Most of the times, the primary focus within system development lies on insuring functionality, rather than making the system usable. The literature specifies that a non user-centered approach can contribute to a product with low usability, which can lead to an ineffective and unsatisfactory experience for the end users.The purpose of this thesis is to begin an investigation to see if the use of non user-oriented system development methods is a possible cause of low usability in the final system.To achieve the purpose of this thesis, we have conducted a case study. Within the case study we examined the usability of a time reporting system. The case study included seven minor studies; an investigation concerning the development of the system, an expert evaluation of the system, interviews and observations of users, developed paper prototypes and executable prototypes, both which user testing was performed on.The result of this study shows that by working with user-entered methods, the usability in the time reporting system increased after the design had been revised.

The purpose of this thesis is to examine and present the oportunities of solvingcontrol problems using Modelica. This is done by creating some demonstrationexamples with exercises. These examples should cover as many types of controlproblems as possible. The exercises are aimed for people with basic knowledgein modeling and automatic control engineering but with little or no knowledgein Modelica. There are different types of Modelica implementations and the onesused in this thesis are OpenModelica and MathModelica..

In industrial control systems PID-control remains the prevalent strategy, also for processes that would benefit from model based control. The purpose of this thesis is to evaluate whether model based control can be readily implemented in an industrial control system. To this end a simulated surge tank with a simulated industrial control system is studied. For evaluation two scenarios with specified objectives are selected.Following a review of LQR and versions of MPC, Predictive Functional Control (PFC) is considered the most suitable for implementation. PFC is a form of MPC developed with industrial applications in mind and therefore has several advantages for implementation in an industrial control system.

The mainpart of this thesis is about the developing of a new analysis tool to be used in Zenicor Medical Systems AB ECG-system. The primary task of the system is to simplify the ECG survey for patients who suffers from different kinds of arrythmias, for example heart fibrillation. With this system is it possible for the patients to do their ECG survey by them self at home and then send the signal with their telephone or mobilphone to a server. The equipment used to do the survey is not bigger than you can have it in a pocket and this results in a bigger flexibility for the patient. A doctor can connect to the server and analys the ECG-curve and follow up the patients condition..

This thesis describes the process of developing a reservation system for common resources through a TV-interface. The system is developed in cooperation with the company Dreampark and is built to work in their platform for TV, Dreamgallery. The main goal was to develop a reservation system and to make it work with Dreamgallery, to develop a demonstration version of the system. The thesis describes the approach for developing an easy-to-use and customisable program and interface for making reservations. How this is inserted into an existing program in a suitable way.

At the plant of Sandvik do Brasil in São Paulo there is a need for improving the transport of inserts between the plant building and the stock building. The idea is to install a system with an Automated Guided Vehicle (AGV) to take care of this transportation. The purpose of this report is to present which demands there are on the system and to find the best solution according to the demands.To conclude this work a study was made of the plant and the AGV technology was examined. Several providers of AGV solutions were contacted to get information about prices and detailed solutions.The conclusion was that the most suitable system for this application is a small unit load vehicle using inductive wire as guiding system..

Linjäriseringar av olinjära system är mycket relevanta eftersom det finns en i förhållandevis enkel och omfattande matematisk teori kring linjära system, till skillnad från allmänna olinjära system.För vissa olinjära system är det svårt eller inte ens möjligt att genomföra en analytisk linjärisering.Orsakerna till detta kan vara hög komplexitet av systemet eller avsaknaden av ett analytiskt uttryck.Numerisk analys kan vara en lösning på detta problem.I detta examensarbete används framåtdifferens och centraldifferens för att genomföra de derivata-approximationersom behövs för att genomföra en numerisk linjärisering av ett olinjärt system.Rapporten behandlar även vad som sker då det är dålig upplösning på den indata som används när man genomför enlinjärisering, vad som händer med heltal och binära signaler om de ingår i ett system som linjäriseras ocheffekten av att ha olika samplingstider för olika delmoduler i ett system som linjäriseras.Slutligen undersöks numerisk bilinjärisering av ett system på bilinjär form och en jämförelse mellan analytisk linjärisering och bilinjärisering görs..