The Energy Market Inspectorate is implementing a new tariff regulation in Sweden. A small part of the new regulation concerns effectible operation costs and originally they where intended to be calculated using a modification of equivalent comparison standards, in Swedish Ekm. This thesis is intended to analyze if Fortums grid in Stockholm could be described correctly, using equivalent comparison standards. In Ekm every part of the distribution grid is designated a weighting in relation to 1 km 0.4kV over head line. These Ekm-measurements are intended to simplify comparison between different grid areas with different structure and geographical conditions.

Convective snowbands is a weather phenomenon that is associated with heavy snowfall in a limited area. They are formed over ice-free parts of e.g. the Baltic Sea when there is a cold easterly airflow over relatively warm water. These convective snowbands can cause large amounts of snow along the Swedish east coast, often causing traffic hazards. Sometimes they can even paralyze an entire community.  In this study, convective snowbands that have formed over the Baltic Sea during the period 1980-2009 are examined, in order to find out how often they occur, what place they are most common and in what month they usually appear.

Automatic milking systems (AMS) provide the opportunity for less manual labour and an increased milking frequency. But in order to reach an optimal milking frequency a well-functioning cow traffic is crucial. There are many factors affecting cow traffic but one factor that has not been studied thoroughly yet is the effect of different light intensities during the night, 22.00 h to 05.00 h. Therefore the aim of this study was to determine the effect of different light intensities during the night on number of selection gate passages (GP), milking frequency and milk yield. The study was conducted as a Latin square were three light intensities were applied: LOW (11 ± 3 lux), INT (33 ± 1 lux) and HIGH (74 ± 6 lux), in three different herds.

Healthy calves are the foundation in order to run a profitable diary production. Being healthy as calf results in a better start in life and good growth is expected to follow. Within dairy production it becomes more common to rear calves in groups and feed them by an automatic milk feeder. The milk feeder enables for the calves in greater extent to ingest milk or milk replacer several times per day and they are also able to perform natural behaviors in greater extent. Group rearing of calves puts higher demands on the animal keepers to localize individual calves in the group pen, showing signs of illness.

I dagens värld har länder ett tätt sammanlänkat ekonomiskt samarbete. Detta innebär att ifall ett land drabbas av en finanskris, kommer även andra länder att falla likt dominobrickor, in i en väntande finanskris. Just detta skedde år 2008 och 2011, då ett flertal av världens länder drabbades av en stor finansiell kris. I skuggan av dessa kriser växte en social rörelse fram vars syfte var att uppmärksamma människor om vad som, enligt rörelsen, egentligen hade hänt. Rörelsen som växte fram är känd som Occupy-rörelsen.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

The purpose with this study was to investigate how the behaviour and physiological parameters differ between high ranked and low ranked cows, and between cows in an automatic milking system verses conventional milking parlour. The study was carried out at the Kungsängen research Centre, Department of animal nutrition an management, Swedish University of Agriculture Sciences, Uppsala. Twelve cows, the six highest and the six lowest in social rank were selected from the automatic milking system for the experiment. Ten cows, the five highest and five lowest in social rank were selected from the conventional system. Blood samples were taken during milking and resting.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

Milkability or ease of milking, has higher importance today for Swedish dairy cattle producers after the introduction of milking parlours and automatic milking systems. Milkability is the cow?s ability to quickly milk out and be completely milked. There are several measures of milkability available. Today the farmer measures the traits subjectively in relation to the conformation scoring of the cow 30-270 days after her first calving.

Arbetet bygger på att de informationssystem som används idag men som blir allt äldre och därigenom inte klarar de krav som ställs på dem. Detta medför att informationssystemen måste migreras till modernare plattformar, då företagen dels inte klarar sig utan dess nuvarande funktionalitet och dels måste vidareutveckla systemen.Detta arbete tar upp olika sätt som detta kan genomföras på och vilka problem som kan komma att uppstå när detta sker. För att kunna undersöka detta så genomfördes ett antal migrationer. Språken som migrationen kommer att ske mellan är Visual Basic 6 och Visual Basic .net. Migrationerna kommer att ske med hjälp av ett migrationsverktyg, samt ett ramverk som i arbetet skräddarsys för just arbetets typ av migrationer.Det arbetet kommer fram till är att det sker problem vid användande av ett verktyg och även att det inte ger tillräckligt med respons på vad som gått snett under migrationerna..

The purpose of this work is to examine how ecotourism exists in Sweden. In order to answer this, the essay has been based on a qualitative method, which means that the authors have mainly used depth interviews for information gathering. Some of the empirical work is also done using the qualitative method, by gathering statistics, figures and scientific articles. The essay is divided into various chapters to give the essay a clear structure and for the convenience of the reader. The part that have been of most use and support for authors is the depth interviews with the interviewees.

 The aim of the study was auditing medical records examine postoperative blood glucose levels after undergoing CABG surgery. Furthermore the aim was to determine if the ward staff abides the local guidelines frame of reference concerning each ward, regarding blood glucose measurements and blood glucose levels. The study included 70 patients undergoing CABG surgery at the cardiothoracic surgery, Uppsala University Hospital. The study was conducted by retrospective medical record auditing. Studied factors were postoperative blood glucose levels, number of registered blood glucose measurements, a current diagnosis of DM and preoperative HbA1c.

Wind is used as an energy source all over the world. To be able to use this effectively, there is a need for as good forecasts and forecast models as possible. One of these models is Coupled Ocean/Atmosphere Mesoscale Prediction System (COAMPS®) that is used to calculate short time forecasts. This model is used here to calculate wind speeds at two different areas in Västra Götaland, Bengtsfors and Vänersborg. There are also wind measurements with SODAR stations for these areas.

This master thesis was a subtask of a project called EMIR-1. The goal with the thesis was tobuild a system for particulate mass measurements in one of the engine test cells at KTH. Theparticulate mass measurements are planned to be measured with a TEOM.The exhaust gases must first be diluted with air before the sample is sent to the TEOM.Therefore an ejector diluter for this matter also was designed and evaluated in the thesis.Emissions measurements have been done both with and without dilution to determine thedilution ratio. Tests have been done for different speeds and loads.Problems with stability of the dilution ratio have been an issue throughout the process andpressure pulsations in the exhaust pipe are believed to be the cause. More tests have to be done tomake sure that this is the problem.One idea is to make the inner diameter of the diluter nozzle smaller and see if it changes thedilution ratio stability.

Bachelor thesis, Business Administration and Economics Programme, School of Business and Economics at Linnaeus University in Va?xjo?.Spring of 2015 Title: Performance measurement from a cost leadership perspective - A case study on Gekås.Authors: Adrienn Csiszer, Hannah Lundberg & Helena WennerströmTutor: Eva GustavssonExaminer: Karin Jonnergård Keywords: Performance measurement, Performance measurement systems, Generic strategy, Cost leadership strategy, Financial and non-financial measurements. Purpose: The purpose of this study is to examine how a company with a clear cost leadership strategy chooses to work with performance measurements, with a view to comparing a practical example to theorethical approaches. Methodology: The method chosen for this paper is a case study on Gekås AB. The presented data were collected through interviews conducted with four employees on Gekås. Conclusion: The study concludes that for a business with cost leadership strategy the financial measurements are more important than non-financial meausurements. For Gekås it is important to keep the performance measurement simple and understandable for the employees. They only use three measurements (sales, hours and sales per hour) in planning and in evaluation.