In this study it was investigated if the adoption of a new routine for quality control could improve the precision of the dimension measurement obtained by harvesters. Data was collected from three different harvesters. First, a reference data set was collected before the new procedures had been incorporated, and then when the new methodology was implemented another data set was collected by the harvester operators, allowing the two data set to be compered. The results indicated that following the implementation of the new procedures, the reliability and the precision of the measurements has increased. All harvesters included in the study had improved regarding most of the controlled factors such as standard deviation, systematic difference and hit rate within ± 2 cm for length and ± 4 mm for diameter..

Live-weight at different ages for Swedish Holsteins (SLB) and for the Swedish Red and White Breed (SRB), and the correlation to heart girth and height at withers. The aim of this investigation was to study the live-weight changes and mature weight for the Swedish Red and White Breed (SRB) and for Swedish Holsteins (SLB), and to estimate the correlations between body weight and body measurements such as heart girth and height at withers, respectively. The material used was from one of the experimental dairy herds (Jälla) of the Swedish University of Agricultural Science. It included recordings on 293 dairy cows with information from 7142 weight occasions and recordings on 275 dairy cows with information of 557 heart girth measurements and 560 measurements of height at withers. The registrations were done during 1993-2002. There was a large variation in live weight between cows in different ages and lactation stages.

Denna studie är ett försök att modellera den alpina permafrostens utbredning inom Kebnekaisemassivet i norra Lappland. En karta som visar sannolikheten för permafrostens utbredning har skapats med hjälp av data från Bottom Temperature of Snow cover (BTS) - mätningar samt statistisk modellering genom logistisk regression.Fältstudien genomfördes under mars till april 2011 med totalt 56 BTS-punkter från 1073 till 1805 m.ö.h. Permafrostförekomsten bestämdes vara en funktion av höjden. För att utreda detta användes stepwise selection som är en metod för att identifiera statistiskt signifikanta variabler gentemot en beroende variabel. De andra parametrarna som testades var topografins sluttningsgradient, riktningen av den maximala lutningen och den potentiella solinstrålningen.

Wastewater contains biodegradable materials, which are often measured as BOD7.Trickling filters are sometimes used as a purification step for BOD-reduction. Atrickling filter is a tower, which is filled with a carrier material. Microorganisms growon the carrier material in the form of a biofilm. This biofilm consists mostly of bacteriathat purify water from BOD.In Älgarås? wastewater treatment plant the water is purified by a trickling filter.However the treatment plant has difficulties reaching the emission requirements forBOD.

This thesis serves to examine how manufacturing SMEs consider outsourcing. Furthermore, we aim to identify the main characteristics and patterns for these types of companies that can explain their rationale in such a decision. The chosen method for this thesis is abduction and selected research approach is multiple case studies. Seven case studies have been conducted at EAB AB, Esbe AB, Hörle Automatic AB, Pelly Industri AB, SGV Industrier AB, Swede-Wheel AB and Wulkan AB. Our findings have illustrated that although traditional outsourcing theory provides a good platform for explaining the rationale behind outsourcing decisions in SMEs, we have identified additional considerations that SMEs, operating as 2, 3 or 4-tier suppliers towards OEM-corporations, make.

The discrepancy in the rights for healthcare between undocumented migrants and the citizen in Sweden is a prerequisite for the existence of Läkarkliniken. Because of the chosen patient group the clinic stands outside the regulations from the National Board of Health and Welfare. The aim of this study was, from an institutional perspective, to investigate how such a unique player is designed and where the influences to the design origin from. The task was conducted thorough a qualitative case study with base in depth interviews. High levels of isomorphism were observed between Läkarkliniken and the general healthcare, however differences were seen as well.

Hälsans Trädgård is a project which is going to start in Gamla Linköping, Sweden. The authors were commissioned by Arbetslivsresurs, a company working with work rehabilitation, to select, define and make job analyses on five work tasks at Hälsans Trädgård in Gamla Linköping. A job analysis means an analysis of the demands the job make of the individual. The job analysis used in this study is called The Revised Handbook for Analyzing Jobs (RHAJ) and is from the US Department of Labor (DOL). As RHAJ is an American instrument, the authors produced a form where the concepts are translated into Swedish to make the analysis easier.

In this thesis we propose a conceptual plan for thedevelopment of an Agroforestry Training Centre (ATC)in Musoma, Tanzania. The aim is to make a proposalto support peasant education in agroforestry. How canan ATC in Musoma be developed into a stimulatingand educational park suitable for teaching agroforestrymethods to peasant farmers and other potential users?To answer that a field study was conducted to investigatehow our client Vi Agroforestry Programme (Vi) and thetarget groups of the client can benefit from the site.The thesis begins with a short explanation of thecontext, in which the ATC plays a part followed by amethodology chapter. Next are three chapters presentedwhich introduce the reader to the research conductedbefore starting the proposal, these include: results ofliterature studies, study of precedents, and results of fieldstudy.

The primary aim of the current study was to gain increased knowledge about drivers' risk experiences. The study was based on questionnaires answered by 30 private drivers and 30 bus drivers, with 50% men and 50% woman in each group. The study revealed no differences, either between men and women drivers with regard to their experience of risk, or between the groups of private and bus drivers. Gambling is common within the private drivers group. Mistakes are common in all groups.

Turning solar collectors, heliostats, is certainly not a new idea but has been explored for at least two decades. Projects on this subject have resulted in more or less realistic constructions, in a commercial point of view. Far too often the technical goals have had higher priority than the economical, which has resulted in a few constructions having the ability to compete with conventional, fix solar collectors. The economical issues have been given high priority in this project, without decreasing the demands on reliability. The system has been given the following mechanical and electronical properties: One-axis movement, fix heat carrying fluid system, microcomputer controlled movement and automatic protection from overheating.

Lättelement located in Örnskoldsvik AB is one of Sweden's leading companies in the development of building elements in the form of roofs, walls and floors made ??out of light beams. The company has clients from Lund to Kiruna, and from Norway. This means that the elements have high standards when they have to take many different loads from wind and snow due to such wide geographic variation.The roof elements are structured so that the main body is made of light beams with an I?profile.

This paper describes the design and implementation of an automated build system for the JAS39A simulator FUS39A at HiQ:s offices in Arboga. The assignment was to automate the process in which modules are built; the simulator is composed of a number of modules which are built manually at the end of each week, this process takes about a day of manual labor. The system can automatically build a module as either a scheduled service or by manual invocation. The system contains functionality for reporting the build results to any given recipient by e-mail. The purpose of the system is to free up the time put into manually building the modules for better suited tasks by automating the build of FUS39A.The assignment was split into two parts, an analysis part where information of the old system was gathered, tools and methods were chosen and the new system was designed.

Since feeding fodder crops to dairy cows is a heavy and time-consuming but often disregarded line of work, this study wishes to view the different possibilities that are currently available to decrease the time to feed and apply this knowledge on an existing farm. For this purpose, four farms have been studied due to what feeding systems that are currently used and how long time the feeding required. The occurring systems are either mobile, i.e. a feed mixer operated by a tractor witch feeds the cattle via a drivable fodder table, or a stationery mixer, i.e. an electrically powered mixer which fills an automatic feeder.

We would like to gain a more in depth knowledge of whether the modern orientations both within corporate governance and control philosophy lay the foundation for enterprises? more sustainable success. These both modern orientations are increasingly focusing on the importance of enterprises? setting of goals and visions on the basis of stake holders? interests and the employees? more active engagement in and motivation for the goal achievement. Despite these common inherent characteristics, it is not evident from current scientific debate how such integration actually emerges in the control philosophies of the enterprises.

Huvudsyftet med det här examensarbetet är att se om det finns ett skäl eller behov att skapa ett serviceföretag inom IT och finna affärsmodeller för detta företag. Vidare avses utvärdera dagslägets hantering av IT hos små till medelstora företag. IT har blivit viktigt för företagsverksamheten men kan lätt försummas i mindre och medelstora företag Vi vill genom en marknadsundersökning se om det finns ett behov av ett serviceföretag. Därtill genom en undersökning av existerande teknologi och öppen mjukvara utvärdera om ett serviceföretag kan skapas för hantering av IT hos dessa företag. I vår undersökning fann vi vissa företag som är intresserade av vår lösning och vi fick svar på en del av våra frågor om hur situationen ser ut för företag inom Gävleborgsområdet.