Sitka spruce (Picea sitchensis) is not considered to be a native species to Swedish forests. It´s origin is the pacific coast of Northern America, an area that is dominated by a coastal climate which makes it likely to believe that it would be well suited for growing in the south-west of Sweden. This study aims to investigate the gain in production that can be reached by growing sitka spruce instead of Norway spruce (Picea abies) in the county of Halland. A regression model based on data from forest experiments was produced to explain the gain in production. This model was based on elevation and annual precipitation. The model was then used to create a map layer in arcGIS that shows the gain of volume in comparison to Norway spruce in percent. An analysis was carried out to find what share of the forestland in Halland county that fell into four different classes of production gain.

Background: Inter-organisational ways of working have become more and more common during the last decades. In order to attain efficiency and productivity, such inter-organisational relationships need to be governed and controlled. However, studies have shown that inadequate control is one of the main reasons for why inter-organisational relationships fail. One of the means that can be used for governing and controlling a business is management control. The use of management control in inter-organisational contexts is a quite unexplored area of research at the present time, which might seem somewhat surprising considering the fact that inadequate control is a common explanation for why inter-organisational relationships fail.

There is limited research done in the area of management control in the relationship between companies. This study investigates management control in outsourcing relationships and the decision to change sourcing strategy and to insource functions. The empirical research was conducted at an international company, which in this study has been anonymized. The research is mainly based on interviews. To extend and verify the conclusions drawn, another company, AB Ph.

Turning solar collectors, heliostats, is certainly not a new idea but has been explored for at least two decades. Projects on this subject have resulted in more or less realistic constructions, in a commercial point of view. Far too often the technical goals have had higher priority than the economical, which has resulted in a few constructions having the ability to compete with conventional, fix solar collectors. The economical issues have been given high priority in this project, without decreasing the demands on reliability. The system has been given the following mechanical and electronical properties: One-axis movement, fix heat carrying fluid system, microcomputer controlled movement and automatic protection from overheating.

Suicide and attempted suicide frequently occur in society today and represent a major public health problem. In inpatient psychiatric care the nurse have a central role when caring for suicidal patients. Few systematic studies exists that address the nurse?s practical work with these patients. The purpose of this study was therefore to describe the nursing care of suicidal patients as it was perceived by registered clinical expert nurses.

As collaboration between companies move beyond the single transaction into more long-term relationships the consequences of a company's control system become more complex. The aim of this paper is to provide an understanding of how intra- and inter-organizational control and work practices interact through examining how a company's intra-organizational control influences its customer relationships. The empirical research is performed through a qualitative case study where interviews have been conducted with management and sales staff within the case company as well as with one of the customers. The empirical findings have been analyzed using frameworks and theories regarding management control and customer relationships. The study reveals that the intra-organizational control of the case company affects its relationships with customers in a number of ways.

Investment costs for eight different type housing systems for dairy cows has been calculated in order to compare the building costs as a function of herd size, shelter type and automatization. A commercial calculation programme for building was used and complemented with prices of equipments specific for dairy cow building. Herd sizes were 120, 250 and 400 cows. The milking equipments were automatic milking system (AMS), parallel parlour with 32 stalls (2x16) and rotary parlour with 24 stalls. Shelter was either insulated equipped with automatic cable driven scrapers on solid alleys, automatic feed wagon on rails, or uninsulated with manual manure handling and a tractor driven mobile mixer wagon on a drive-through feeding table. Building cost per cow or per kg milk was calculated using an average life time and 6 % interest rate and annual milk yield is 9 500 kg/cow and year. Structure effect 3-4 % higher for an insulated structure than in an uninsulated for 400 and 120 herd respectively. This is much lower compared to what is normally argued.

ABB Surge Arrestors in Ludvika have for a long time had a problem to keep the moisture at a steady state in the production of their ZnO-powder, that is used to produce varistors.Some black-box models of the spray drying process have been designed and evaluated to find a solution for the problem. After evaluating the collected data it has been found that variations in the supply voltage causes control difficulties for the operator. A cascade control system was designed, consisting of three PI control loops designed with lambda tuning. The disturbance in the supply voltagewas used as a feed forward in the control system.At the end of the project the control system was installed, and tests were made to verify the functionality of the regulator. It was shown that most of the variations in the moisture of the powder could be eliminated using small resources, through purchase of a process controller and four power meters.

På bullriga arbetsplatser använder personal ofta hörselskydd med inbyggda högtalare för att lyssna på exempelvis musik i underhållningssyfte. Om användaren lyssnar på höga ljudnivåer under långa perioder kan bullerskador uppstå i dennes öron. Enligt lagstiftning måste nivån därför begränsas i förebyggande syfte.Bullernivån är ett genomsnitt av de ljudnivåer användaren exponerats för under en arbetsdag. Användaren måste vila öronen om gränsvärdet för bullernivån nås.Om man utnyttjar att det är ett genomsnitt kan användaren tillåtas lyssna på en hög ljudnivå under en begränsad tid för att sedan sänka den. Det går att bevara både säkerheten och lyssningsupplevelsen om en sänkning införs långsamt.Detta arbete beskriver hur en algoritm till en digital signalprocessor kan konstrueras för att reglera ljudnivån.Målsättningen var att algoritmen skulle skydda användarens hörsel utan att försämra lyssningsupplevelsen, och utan att förbruka mer energi än nödvändigt.I algoritmen ingick en prediktor som predikterar mängden buller användaren riskerar att utsättas för, om denne fortsätter lyssna på samma nivå.Långsamma sänkningar av ljudnivån kan då utföras i tid innan gränsvärdet nås.Det visade sig att algoritmen endast behövde ett fåtal samplingar per sekund för att skatta och reglera ljudnivån tillräckligt precist, vilket reducerade energiförbrukningen.Resultatet visar möjligheten att kombinera målen för säkerhet, lyssningsupplevelse och energieffektivitet i hörselskydd.Algoritmen implementerades inte på ett skarpt system.Den hade enbart tillgång till ljudsignalen användaren ämnade lyssna på i underhållningssyfte..

Syftet var att undersöka om personers Locus of Control påverkar deras konflikthanteringsstrategier i kärleksrelationer. Hypoteserna var: H1: Det finns skillnader mellan personer med extern och intern Locus of Control när det gäller vilka typer av strategier de använder för att hantera kärleksrelationsproblem. H2: Personer med intern Locus of Control har större benägenhet att använda sig av relationskonflikthanteringsstrategin Kompromiss i sina kärleksrelationer. H3: Kvinnor påverkas mer än män av Locus of Control när det gäller vilka typer av strategier de använder för att hantera kärleksrelationsproblem. Deltagarna var 172 studenter.

The connection between management control systems for controlling sustainability and a firm's motivation for engaging in sustainability is not completely understood (Arjaliès & Mundy, 2013). The aim of this thesis is to develop a more profound understanding for management control in achieving sustainable companies. To do this, we raise the question: How and to what extent do companies use management control systems to achieve sustainability compliance Simons's Levers of Control (1995) are applied to this question in order to get a consistent and thorough insight of management control systems. Hence, a case study of ABB:s work to achieve material compliance in accordance with EU-regulation was conducted. The findings of the case study reveal that ABB uses the regulations as explicit goals and implement them in sustainability procedures.

In the electronic industrials, power control of AC motors is commonly used. For example power control of a washing machine motor, a vacuum cleaner motor or a coffee machine motor. The company Rejlers Ingenjörer AB has many projects where power control of AC motors is included. A prototype card for this task can save time and money for the company in the future and this is the reason for this thesis.The motors are power controlled by a TRIAC and control of the trigging pulses to the TRIAC. This card is modularly built and can easily be adapted for future projects where the power control of AC motors are included.The prototype card can be used as a subsystem in a larger electronics projects or as it is in lab environment for testing and evaluating new motors..

Föreliggande studies syfte var att undersöka validitet och intern konsistens för den svenska översättningen av Impaired control scale (ICS), en självskattningsskala som mäter grad av kontroll av alkoholkonsumtion. ICS består av subskalorna; Attempt control (AC), Failed control (FC) samt Predicted control (PC). Svar på ICS sammanställdes från respondenter (n = 203) som behandlats för alkoholproblem vid mottagningar i Västra Götaland. Faktoranalysen visade en bakomliggande faktor för AC, och två faktorer för FC respektive PC. Den interna konsistensen var god.

AbstractThis report is about the creation of a test system for development of a control system for a off the shelf RC-helicopter, which can be bought for about two thousand SEK. The test system consists of both electronics for controlling the helicopter and mechanical constrainer. The constrainer is used for mounting the helicopter so that it won´t crash.A circuit board including processor and sensors was manufactured. This was used for doing test of the different control algorithms. In this way were we able to analyze the quality of the sensors chosen, and what other sensors that could contribute to the control of the system.Basic helicopter control have been studied and presented in the report.

The purpose of this thesis is to analyze the design and function of an engine production management?s control system and its intended function, and to contrast it with the present management control systems in use on an operational level. Interviews conducted with employees from all levels of the engine production are the main source of this study?s empirical foundation. Information has also been gathered from relevant written material such as annual reports, internal documents etc.