This report describes the manufacture and control of a flying platform. The report describes the basic and fundamental theories required to get the platform flying. It touches on subjects such as A/D-conversion. PWM-control and PID-control. The sensors used in the platform are a gyro and an accelerometer.

This thesis is divided in to two different parts. The first part includes examination of the measurementsystem of an industrial robot using a resolver sensor. The main focus is on methods for suppressing noise in the angularvelocity signal without increasing timedelay. Five different methods are investigated. Three of these are based on oversampling: burstsamplingmethod, meanvaluemethod and correlationmethod.

The acoustics in a control room is a complicated phenomenon. Early reflections, reverberation time and area in the room are some of the problems. This report is about the reflection on the mixing console in a control room. The control room being built, these reflections are difficult to take into consideration since the mixing console is one of the very last items you place in the room. This report will explain three main measurements that were done in order to get the answer to the following question: Does the mixing console interfere the frequency curve at listening position? Three measurements were done and the difference between the measurements was that the microphone and the loudspeakers were placed in different places in the control room.

In the coming years, organic food waste will be collected in the region of Gästrikland, Sweden. The collection is planned to cover the entire region by the end of year 2007. To start with, smaller amounts are being collected and transported to a central composting plant in Sala. However, a central composting plant in the region of Gästrikland is projected.The objective of this thesis is to evaluate a number of possible methods for composting of organic food wastes regarding their environmental impacts and localization.There are four scenarios for future composting of organic waste that have been evaluated. There are two that consist of membrane composting, either in Sala or in the region of Gästrikland.

An explorative study on the work motivation of employees at a retirement home. The three main factors are internal motivation, external motivation and control. A comparison between how important they estimate the different factors to be and how they experience them today reveals which factor is their key motivator and which areas that need improvement. Results indicat that internal and external motivation are slightly more important than control. And the amount of perceived control reflects the amount of creative and initiative behaviour of the individual.

AbstractBackgroundParkinson?s disease is a chronically not curable progressive disease that leads to different degrees of disability. Controlled studies on how patient education influences subjective health in Parkinson?s disease are lacking.AimThe aim of this study was to examine the influence patient education had on drug requirements and on subjective health status of persons with Parkinson?s disease.MethodologyA short form of Health Survey, SF-12, was used to measure perceived health. SF-12 was administered before and one month after patient education (intervention group; n= 48), and in waiting list control (n= 48).

Arbetsplatsmobbning har omfattande konsekvenser för individer i arbetslivet och samhället. Observatören har en viktig roll i arbetet mot mobbning, då dennes ingripande kan influera andra att göra detsamma. Denna studie undersökte om observatörens kön, locus of control och erfarenhet av observerad mobbning har en påverkan på intentionen att ingripa vid en mobbningssituation. Detta prövades utifrån sex hypoteser och frågeställningen hur relationen ser ut mellan ovangivna variabler i förhållandet till intentionen att ingripa vid mobbning. 165 individer i arbetslivet, varav 114 kvinnor, besvarade en enkät vilken innehöll Rotters The internal-external scale, en justerad Negative Acts Questionnaire-Revised och ett instrument inspirerat av Hektner och Swensons påstående om intentionen att ingripa.

Swedish clubfootball of today involves more money than ever before. This developmentdepends on the higher interest for football in Sweden which generates more revenues fromaudience and TV-contracts, which leads to more money from sponsors and an increasingmarket for selling souvenirs. Despite the fact that the increasing interest has generated morerevenues, we can still see reports in the media about economic problems in some clubs. Whatis the reason for this? Do the clubs have the ability and knowledge about economic controlthat it takes to run such a business as the clubfootball in Sweden has become?Purpose: The purpose of this study is to examine the economic control in a number of clubsplaying in the two Premier Divisons of the Swedish Football League.

Traditional financial management has lately been criticized, since it gives inadequate and unilateral information for decisions and strategy of the operation. The purpose of this essay is to investigate if a balanced scorecard is able to work together with a budget and become a stronger control system for the management. Essential theory underlies the gathering of data as well as the analysis, and the empirical investigation is based on personal interviews. The conclusions drawn from my analysis are that two parallel control systems could complement each other?s weaknesses.

Heavy duty vehicles often have problems with traction during the winter periods. For vehicles that can lift tag axles it is possible to increase the normal force on the driven axle by lifting one or more tag axles, this will then increase the propulsive force of friction. This however increases wear on both road and vehicle. A possibility to reduce the wear while achieving nearly equivalent traction compared to lifted tag axles is to allow the vehicle to regulate the normal force by lowering the pressure in the air suspension associated with the tag axles or by the lifting of these axles. The vehicle would then by itself be able to set just the right amount of normal force on the drive wheels to avoid unnecessarily high normal forces while maintaining sufficient traction.The purpose of the report is to find out which parameters affect heavy duty vehicles when driving on slippery slopes and how traction can be improved.

This master?s thesis describes the development of a model of the catalystsystem aiming at control by an MPC. A well functioning model, which is suitable in control purpose, is important while emission legislation become more and more hard to fulfill for the car manufacturers. Much research has been done in the field of physical modeling of the system, but in this work a linear adaptive time discrete ARX-model is developed and validated.The systems tendency to change its dynamic during usage implies that the model must be adaptive. The developed model proved to be well functioning and shows promising conditions for the MPC design.

The purpose of this thesis was to look at the relationship between the experiences of work related stress among male bank employees and how they dealt with potential stress. The thesis focused on male bank employee?s experiences and management of work related stress with the control requirements and support model as a starting point. Work related stress is a phenomenon that has become a serious problem with economic impact for both the individual and organizations. Increased absence from work due to medical issues is one example of such consequences.

Foot rot is a severe claw disease which occurs among sheep and goats in most parts of the world, with outbreaks in hot and humid weather. It is a contagious bacterial infection caused by Dichelobacter nodosus in association with Fusobacterium necrophorum. Foot rot has a negative impact on both animal welfare and economy.This thesis presents how Australia, Nepal, Norway, Switzerland, Great Britain, Sweden and Uruguay handle foot rot. In the selection of countries the focus was on countries that have control- or eradication programs against foot rot. There are differences in the climate, animal husbandry practices, animal welfare and economic resources in the countries that are presented.

The accounting scandals that have attracted attention in recent years have led to internal control becoming a more central part of business activity. Doubts about what firms actually do have increased, all caused by the attention of accounting scandals. To counter this, frameworks and laws evolved and gained a significant role in the organization and its surroundings. The aim of the present study is to find out how four companies in the Kristianstad region are working to ensure its internal control and how they work to minimize risk and reduce uncertainty. We have used a qualitative method and interviewed a person in a senior position in each company.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.