Genom vår undersökning ville vi ta reda på om SALSA, Vodafones data warehouse tillgodoser användarnas informationsbehov. Som stöd för vår analys jämförde vi befintliga teorier inom områdena information samt data warehouse, med tillämpning i verkligheten genom vårt referensföretag. Undersökningen har utförts genom skriftliga intervjuer samt enkäter, där två olika undersökningsgrupper ingått. Den ena gruppen har utgjorts av SALSAs utvecklare och den andra av SALSAs användare. Den hypotes som vi arbetat med är "SALSA tillgodoser användarnas informationsbehov" med underfrågorna "Vilka krav kan användarna rimligen ställa på SALSA?", "Vilken information saknar användarna att få fram från SALSA?", "Vilka förslag på förbättringar gällande SALSA har användarna?" samt "Räcker användarforum för att framföra användarnas synpunkter på SALSA?". Då vi analyserat och bearbetat materialet från enkätundersökningen samt besvarat våra frågeställningar, har vi verifierat vår hypotes.

The purpose of this study was to investigate the association between physical activity and perceived stress, energy and musculoskeletal disorders among office-workers and warehouse-workers and also to see if there were any differences depending on work-place and gender. The method that was used to collect data was three different validated questionnaires that measured stress and energy (the Stress-Energy questionnaire), musculoskeletal disorders (intensity and localization of pain, a Pain Drawing questionnaire with a VAS-scale) and physical activity (IPAQ ? the short version). Eighty-eight workers participated in the study. Forty-seven of them were office-workers and forty-one were warehouse-workers.

Arbetet beskriver ett systemutvecklingsarbete som innehåller kravfångst, analys och design av en data warehouse/business intelligencelösning till Svenska bordtennisförbundet. Svenska bordtennisförbundet/SBTF/ behöver utöka sitt beslutsunderlag för att kunna fatta strategiska beslut. SBTF behöver även få bättre kontroll på sin verksamhet för att kunna sätta, utvärdera och följa upp mål. SBTF önskar lösa detta genom att skapa ett data warehouse till vilket data från de olika systemen laddas för att därefter kunna presenteras för användarna genom business intelligence. I kravspecifikationen framkom att klubbarnas medlemsregister, alla tävlingsspelare, all träningsstatistik och de matcher som spelats i Sverige sedan 2011 var det dataunderlag som skulle ingå i ett data warehouse.

This report is the result of a project in the course Independent Projekt in Molecular Biotechnology at Uppsala University during the spring of 2014. The foremost purpose of the course is to give students the opportunity to carry through exstensive work in a project environment. This project was formed based on a comission from the biotechnology company SweTree Technologies, and the goal has been to compose a summary of the different techniques and methods that exist in the field of mass propagation of trees through the method of somatic embryogenesis.The project group has obtained information about the area mainly throgh reading patents, trying to find key components and bottlenecks in other companies? somatic embryogenesis technologies. This paper is divided into different sections, containing the patents of the automation of different steps in the process.

This thesis deals with the field of warehouse management, focusing on frequency control of stock. The purpose of the thesis is to reduce the warehouse staff mileage by placing an article based on its number of picks, i.e. how frequently it gets picked. In order to achieve relevant results the following four questions have been answered in the thesis: How should the articles be placed with regard to the picking frequency?Which factors, if any, needs to be addressed beyond the picking frequency when articles are placed based on frequency?Can the present picking system be improved?Is frequency placement with regard to the picking frequency profitable to implement for the company?The thesis is based on literature studies and on the data that has been collected from the company?s business system.

Warehouses are a key aspect of modern supply chains and play a vital role in the success or failure of businesses today. Figures from the USA indicate that the capital- and operating costs of warehouses represent about 22 % of a company?s logistics costs while figures from Europe indicate 25 % (Baker & Canessa, 2009). Because warehousing is such an important function within a company, the authors chose to focus on this in their thesis. The purpose of this thesis has been to examine the significance of a Warehouse Management System (WMS) and item identification with attention to logistic efficiency.

This report is the result of a project in the course Independent Projekt in Molecular Biotechnology at Uppsala University during the spring of 2014. The foremost purpose of the course is to give students the opportunity to carry through exstensive work in a project environment. This project was formed based on a comission from the biotechnology company SweTree Technologies, and the goal has been to compose a summary of the different techniques and methods that exist in the field of mass propagation of trees through the method of somatic embryogenesis.The project group has obtained information about the area mainly throgh reading patents, trying to find key components and bottlenecks in other companies? somatic embryogenesis technologies. This paper is divided into different sections, containing the patents of the automation of different steps in the process.

Haldex Barnes Hydraulics (HBH) is a company which produces hydraulic aggregates for use in forklifts, construction equipment, and trucks. The last two years the company has expanded. This has lead to an insufficient production of aggregates. Thus wishes HBH to increase their production without making to large investments.This report includes a now-state analysis of the problems and where they are. From this a further analysis of possible improvements are made.HBH works mainly with assembling and this is made manually.

This report is the result of a project in the course Independent Projekt in Molecular Biotechnology at Uppsala University during the spring of 2014. The foremost purpose of the course is to give students the opportunity to carry through exstensive work in a project environment. This project was formed based on a comission from the biotechnology company SweTree Technologies, and the goal has been to compose a summary of the different techniques and methods that exist in the field of mass propagation of trees through the method of somatic embryogenesis.The project group has obtained information about the area mainly throgh reading patents, trying to find key components and bottlenecks in other companies? somatic embryogenesis technologies. This paper is divided into different sections, containing the patents of the automation of different steps in the process.

Allt större och större andel företag väljer att presentera och förmedla varor och tjänster via e-handel. En viktig aspekt vid e-handel är att kunden känner förtroende för e-handelsapplikationen och företaget. Denna rapport redogör för vilken inverkan multimediala inslag har för förtroendet av en e-handelsapplikation, vid initialt användande. En undersökning har genomförts med hjälp av en kooperativ utvärdering av fyra e-handelsapplikationer vilka innehåller olika typer av multimediala inslag har.Resultatet av undersökningen visar att multimediala inslag inverkar positivt på förtroendet för e-handelsapplikationer. Däremot finns indikationer på att för hög grad av multimedialt inslag inverkar negativt på förtroendet för e-handelsapplikationer..

There have been, in some rare cases, difficulties with clamping of inserts with U-holesin their tool holder. According to the complaints, the inserts could not be properlyclamped or could fracture when clamped. A study has shown that variations inclamping behaviour are mainly depending by the position of the screw hole in the toolholder and the centering of the screw hole in the insert.The focus of this project has been the centering of screw hole in insert. It has beenshown that the screw holes are not always enough centered in the insert. Theproblem may occur after a certain step in the production, i.e.

This paper describes the design and implementation of an automated build system for the JAS39A simulator FUS39A at HiQ:s offices in Arboga. The assignment was to automate the process in which modules are built; the simulator is composed of a number of modules which are built manually at the end of each week, this process takes about a day of manual labor. The system can automatically build a module as either a scheduled service or by manual invocation. The system contains functionality for reporting the build results to any given recipient by e-mail. The purpose of the system is to free up the time put into manually building the modules for better suited tasks by automating the build of FUS39A.The assignment was split into two parts, an analysis part where information of the old system was gathered, tools and methods were chosen and the new system was designed.

Inventory management is a key part of a company?s logistics function and is of great importance to companies as it is a substantial cost. It is of high importance for a company to make sure that the warehouse is efficient as possible. In this thesis two factors that hurt a warehouse?s efficiency are introduced; inventory inaccuracies and lead-time variations.This thesis has been dedicated to analyze how inventory inaccuracies and lead-time variations arise and how to eliminate them.To be able to solve this question we have used a qualitative research method.

The task for this thesis is to design a tool that is used to cut-out preforms of thermoplastic adhesive and also to make an estimate of costs for the stamping tool. The tool is used in the repair process at the MCM production line. The result of gathered information has affected how the design of the stamping tool has developed. The handling of thermoplastic adhesive in the repair process is one of the factors that influenced the design. The adhesive is sensitive for exposure to moisture. Therefore an automated feeding system of the adhesive is not recommended. The users wished for an automated stamping tool.

Prevas AB har utvecklat ett lagerhanteringssystem som kallas Snitcher Warehouse. Programmet körs på handdatorer och används av lagerarbetare för att underlätta det dagliga arbetet. Applikationen innehåller bland annat funktioner för att hantera gods som inkommer till lagret, det hanterar också flera olika typer av plocklistor samt funktioner för saldo och inventering. Lagerhanteringssystemet körs mot ett affärssystem som heter Movex/M3.Affärssystemet är stort och komplext samt innehåller många fler funktioner än vad Snitcher Warehouse har användning för. För att kunna demonstrera och felsöka applikationen behövs en uppkoppling mot affärssystemet samt tillgänglig testdata i det.