Abstract Background Todays guidelines for advanced CPR emphasize chest compressions with good quality and early defibrillation. Prehospital CPR performed by ambulance crew, an automated external defibrillator (AED) is used. The AED analyzes the heart rhythm and the performer is following the advice to chock the heart or not, given by the AED. During on-going CPR there are sequences when no chest compression is performed known as hands-off time. Hands-off time includes the time for the AED to analyze the heart rhythm and the time when advice is given to the crew.

The purpose of this assignment at SSAB Tunnplåt in Borlänge was mainly to investigate and describe the circumstances for the spare parts stored in storage facilities within the area of operation. Even new facilities which could serve as storage rooms and their opportunities for storing spare parts were an important part of the investigation. This because of the need for improved storing of spare parts. Furthermore, market offers where reviewed for storage of spare parts in more tailored designs. The work will culminate in proposals for improvement which is of importance for the development surrounding the storage and handling of spare parts.

The demand for shorter lead-times and increased delivery reliability puts pressure on companies to provide more efficient logistic services. One strategy to deal with this demand is by outsourcing logistics to a third part. The development of logistics information systems enables increased control over business supply chains. This is why Green Cargo aims to create a Logistics Control Tower (LCT) solution to provide it?s customers with better information with higher availability.

In the assembly process of airframe structures there are many drilled holes and on some parts the holes are mainly drilled manually with pneumatic handheld drilling machines. During conventional drilling in metal, burrs appear. To remove these burrs the parts of the structure must be separated and deburred before they can be put together for fastening. This is a time consuming measure and therefore expensive. To facilitate this process and lower production costs some parts of the process needs to be automated.A part of this thesis was a project in co-operation with Saab, Novator, Specma Automation and the University of Linköping.

Kritik har riktats av forskare mot bristerna i kommunikationen mellan företag och dess investerare, vilket leder till onödigt höga kostnader för investerare att analysera och bearbeta informationen. Detta leder i sin tur till att företagens kapitalkostnader blir högre än nödvändigt. Syftet med denna uppsats har varit att ge förslag på hur svenska företag kan förbättra kommunikationen med sina investerare för att deras beslutsfattande förbättras. Vi har använt oss av en kvalitativ metod som bygger på intervjuer med representanter för kreditinstitut, aktieägare och professionella analytiker, som arbetar med investeringar i svenska aktiemarknadsföretag. Angreppssättet har varit normativt/induktivt, vilket innebär att vi har gjort en induktiv studie, men vårt syfte har varit normativt.

Examensarbetet är utfört på Lifco Dental, som är ett distributionsföretag i Enköping undervårterminen 2013 och omfattar 30 högskolepoäng. Lifco Dentals huvudsakliga verksamhet ärlagerhantering av tandläkarartiklar och det rör sig om cirka 40 000 artiklar i varierandestorlek.Examensarbetet avser i första hand styrning av lagerhållning och artikelplacering. Andraområden som har bearbetas är ergonomi och personalfrågor. Arbetet kretsar kring följandeforskningsfrågor;1. Enligt vilka principer kan man placera artiklar?2.

As a part of Göteborg Energi?s work towards a smarter electric grid, the company has chosen to investigate the possibilities of automation in their middle voltage grid. In Europe, there are example cases where these technologies already are installed which many articles on the CIRED conference 2011 proved. Netcontrol Oy in Finland has, together with Tekla, created an automated SCADA system that Vattenfall in Finland today uses. The grid mainly consists of 10 kV open loop fed city grid and this automation is mainly designed for this type of grid.

Användandet av mobila applikationer har växt radikalt de senaste åren och de samverkar med många system. Därför ställs det högre krav på kvaliteten och att applikationen ska anpassas till många olika enheter, operativsystem samt plattformar. Detta gör att test av mobila applikationer blivit viktigare och större. Detta arbete har bedrivits som en jämförande fallstudie inom området test av mobila applikationer samt testverktyg. Syftet har varit att beskriva hur testning av mobila applikationer sker idag vilket gjorts genom litteraturstudier och intervjuer med IT-företag.

Water is vital for all life on earth. But it can also be dangerous, even fatal, if it is polluted water. 60 percent of child mortality can directly be deduced to dirty water. Not only developing countries are affected, even in the western world epidemics are breaking out by partake or bathing in dirty/polluted water.MIP, Molecularly Imprinted Polymers, is a biosensor technology that can provide faster and more reliable response than the current methods of water analysis. It is also cheaper and due to that more samples can be taken and analyzed.

Målet med denna uppsats har varit att kartlägga vilken kvalité informationen som datalager tillhandahåller har för de beslutsfattare som använder datalagret. Vi har även försökt identifiera olika faktorer som kan vara viktiga att beakta för att uppnå en hög informationskvalité hos datalager. För att kunna genomföra detta har vi intervjuat olika beslutsfattare för att kartlägga hur de uppfattar den information som deras datalager genererar. Genom denna undersökning har vi kommit fram till att datalagren varit givande och framgångsrika för de tre företag vi genomfört undersökningen på. De har alla upplevt omfattande fördelar med det som de inte upplevde innan introduktionen av datalagret.

The research group Soil and Water Management at the department of Soil and Environment at theSwedish University of Agricultural Sciences in Uppsala are studying greenhouse gas emissions fromcultivated peat soils. To measure carbon dioxide emissions from peat soils in the field the researchgroup are now using two portable carbon dioxide meters (Vaisala GMP343). For practical reasons,they plan to acquire a new type of automated field meter. The aim of this study is to evaluate thepresent meters to see how environmental conditions and instrument settings affect the results,which is meant to facilitate the introduction of the new field meter when the meters needs to becompared. As a part of the study the relationship between groundwater level and carbon dioxideemissions from peat soils will be investigated.The evaluation of the two carbon dioxide meters was made by connecting them to one single airtightsystem, with the aim of creating identical measurement environments.

In order to optimize calf welfare and health it is important to know the behavior of cattle in free ranging conditions. When the cow is about to give birth to a calf she will leave the heard about 12 hours before. It is then rather obvious that isolating the cow about calving time in a single pen is imitating the cows? natural behavior. To save space and minimize building cost it?s common that the farmers build calving pens for four of five cows especially at larger farms.

Swedish agriculture stands in front of big changes the whole time. As a milking producer you have to adapt and develop the company to these changes and find the best solution. This potential is easy to find if you compare your company with other similar companies. Labour cost is the biggest cost in milking production after the cost for food. Today it is rather easy to measure how many hours per cow different system of cow houses needs, but we do not know so much about how many hours it takes to breed a calf. To learn more about the labour time with the calves during the first time after the calf was born, I made time studies on five different farms with calf hutches, automatic milk system, large calf boxes, and smaller calf boxes with teat buckets.

Denna rapport är resultatet av en analys som gjorts vid Vest-Woods fabrik i Forserum under våren 2007 i syfte att reducera interna transporter. Vest-Wood AB i Forserum tillverkar dörrar för den svenska marknaden men förser också en annan fabrik (SdrFelding i Danmark) i samma koncern med dörrstommar. Materialhantering för att förse Sdr Felding fabriken med dörrstommar medför i dagsläget mycket interna transporter i Forserumsfabriken. För att klara ojämn efterfrågan från Sdr Felding fabriken samt för att kunna jämna ut sin egen produktion har Forserumsfabriken valtatt lagerföra de tolv artiklar som beställs mest frekvent från Sdr Felding fabriken. Buffertlagret vid Forserumsfabriken där artiklarna lagerförs är placerat ca 200 m från produktionen vilket medför mycket intern transport för hantering av dessa.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.