This is a study of the national test in 3rd grade. The national test is obligatory and is conducted in 5th and 9th grade, but since the spring of 2009 the tests also become mandatory in 3rd grade. The case study of this research is to find out how children in 3rd grade perceive the purpose of the national test. The survey should also clarify how students think and feel about the national test, and how they feel before the national test and after they have finished writing the test. Has the test positive or negative influence on children? The survey will also show how much teachers clarify what the significance of the national test is for the students.

In this Bachelor Thesis (20 p.), we present the history and development of "Intelligent Houses", and most important- explore some of the future possibilities in this area. The project has been carried out through an interdisciplinary cooperation between three different educations at the Blekinge Institute of Technology. By conducting a dialogue with various actors with different professions, we have been trying to identify needs within the concept of "Intelligent Houses", were the end user is not only the tenant or homeowner. Through Participatory Design methods, such as a Future Workshop, we have brought the users together to discuss their own and each others needs and hindrances in their respective work practice, and how intelligent house technology could improve their work conditions. We have also been testing a highly sophisticated CO/CO2/Moisture/Temperature/Enthalpy multi-sensor & controller, originally developed for regulating indoor climate systems. Based on the needs we have found in our fieldwork, we have been looking at possibilities to make multi user solutions with the sensor..

Rising complexity in the development of real-time systems has made it crucial to have reusable components and a more flexible way of configuring these components into a coherent system. Aspect-oriented system development (AOSD) is a technique that allows one to put a system?s crosscutting concerns into"modules"that are called aspects. Applying AOSD in real-time and embedded system development one can expect reductions in the complexity of the system design and development. A problem with AOSD in its current form is that it does not support predictability in the time domain.

In order to understand user behaviour and navigation patterns, user logging is today widely used in analysis and development of user interfaces. These user logs tend to be quite many and can contain a lot of different data. A big issue is how to process and display this data in a perspicuous way to the stakeholder. This study is about how to develop a prototype to handle this issue. It was solved by various methods from human-computer interaction.

Att skriva enhetstester är en viktig del i nya populära systemutvecklingsmetoder som extreme programming. Med testdriven utveckling skriver man testerna innan den källkod som skall testas. Ett vanligt problem med dessa tester är att de blir beroende av delar i systemet som inte är intressant för själva testen. Mock objekt är en teknik som gör det enkelt att isolera tester från allt som inte är relaterat till det som skall testas.Det finns två sätt att se på mock objekt. Den traditionella synen är att mock objekt skall användas som ett verktyg vid isolering av externa system.

Nematode-transmitted plant viruses (such as nepoviruses) cause great economically losses in commercially important plants such as tomatoes, grapevines and raspberries all over the world. To avoid spread of the viruses the interest in mapping the viruses has increased. One of the important nepoviruses infecting European red raspberries (Rubus idaeus) is Tomato black ring virus (TBRV). TBRV has earlier been confirmed in raspberry samples from Belarus by ELISA and the aim of this bachelor degree project was to confirm these results by amplifying, cloning and sequencing the coat protein (CP) gene of the virus. In total eight viral cDNA samples, from two different raspberry samples, were amplified and sequenced.

Målet med denna undersökning har varit att ta fram lämpligt bibliotek i programspråket C för generering och parsning av JSON (JavaScript Object Notation). Biblioteket ska användas för att bygga ett nytt API mot Svenska Spels transaktionssystem som ska underlätta för klientutvecklare att anropa systemet. Undersökningen har begränsats till utvärdering två utvalda bibliotek, YAJL (Yet Another Json Library) och Jansson. För att kunna jämföra och analysera dessa har jag implementerat ett testprogram som mäter deras prestanda vid generering och parsning av ett antal utvalda JSON objekt. Jag har även undersökt biblioteken utifrån användarvänlighet och robusthet.

This Thesis in Military Technology deals with experiences drawn from the forced introduction of Weapons Station 01, 2009. The work aims to identify the experiences regarding the forced procurement of military equipment to see how they can develop normal and fast procurement of equipment. The main conclusions of  this work, is to achieve greater capability and increase the military utility, are: -          Common objectives and priorities of stakeholders-          Response and joint types shall determine requirements for system-          Ensure an integrated project team also at lower levels-          Engage the integrated logistic support early in the materiel process-          Include Armed Forces staff as early as possible in the testing and validation-          Prioritize work to facilitate the rapid development of decision on use (BOA)-          Provide back up for increased redundancy in the mission area .

Material handling is a term that includes all kinds of handling of material from a raw product to a finished one. ABB is active in the following segments; foundry, packaging and palletizing, metal industry and plastics industry.The demands for efficiency and reliability have been set very high in the industrial sector. Optimizing of the material handling will give the company higher cost-effectiveness. Around the robot there are different kinds of material flows, to optimize the cycle time, consisting of carriages combined in different ways.Motion Control is a complex system with main functions such as; positioning, synchronizing, indexing and more. The products in the system need to cooperate to make these functions possible therefore integration of motor- and servo products are important.

The purpose of this study was to evaluate if verbal encouragement had any influence on handstrength measurements. Twenty subjects participated in the study, all women between the age of 20 and 62 years. A standardisation of testing conditions and verbal encouragement were designed. Three measurements were conducted during two days using T.K.K 5401 Grip D. First there was a trial set, and then Test 1 (without verbal encouragement) and Test 2 (with verbal encouragement) were conducted.

Visual Type Instrument - VTI, is a tool containing a typeface and a set of geometric calculations that generates numerical data in spreadsheets. The data is determined from the typefaces visual dimensions and is used to calculate leading, type size, margins and format. The aim is to offer, for all of those working with typography and design, a practical way to manage text, image and format in relationship to visual size. Instead of using point measurements, VTI uses a new device called Edo. An Edo is the same as one twelfth of a millimetre.

Traditionally, the majority of Swedish public libraries have carried out most of their acquisitions through Bibliotekstjänst's binding booklets. In recent years, however, many libraries have complemented the binding booklets and other services from Bibliotekstjänst by other ways of acquiring books, such as Internet bookshops, while other libraries have stopped using the binding booklets altogether. There are various reasons for this development, such as Information Technology making it possible for librarians to compare prizes and services from different retailers. Another important reason is the need for public libraries to meet new needs from their patrons, while remaining on a restrained budget, which often causes a need for reorganization of staff and resources.As a way of meeting the new needs for libraries, Bibliotekstjänst has created Profile Services (profiltjänster), a service in which a library outsources its acquisitions to Bibliotekstjänst. The staff of the library, in dialogue with Bibliotekstjänst, design a profile for the acquisitions for the library in question, in order to determinate which types and genres of literature the library and its patrons are requesting.

The use of vision applications are growing and the demand for integration and connectivity with other industrial automation control devices is increasing. Some businesses that are using vision technology follow US Food and Drugs Administration (FDA) regulation concerning audit trail. This thesis investigates the possibility to use vision technology for counting objects, achieving connectivity and to follow FDAs audit trail regulation. A market survey has been used to select suitable hardware and software to be used in the design of an application that is able to count objects and that uses standard industrial network connection i.e. OPC data access and Microsoft?s .NET components over Ethernet.

The ÅF Group is a leader in technical consulting, with expertise founded on more than a century of experience. They offer highly qualified services and solutions for industrial processes, infrastructure projects and the development of products and IT systems. They are also one of the leading names in certified third-party testing and inspection work.Today the ÅF Group has approximately 4,000 employees. Their base is in Europe, but their business and clients are found all over the world.A part of ÅF-Engineerings business is programming different automation systems to clients. Another part is support in both telephone and personal visits.Because the number of clients is high and the flora of different automation systems is big the consequence is that the employees must have access to many licenses with programming tools.

This paper deals with testing the method Reflectance Transformation Imaging (RTI) on the copy of the Piraeus-lion in Historic Museum in Stockholm. The purpose is to find out if it is possible to gather more information about the runic inscriptions. RTI is a method that records the surface normal of individual pixels in a digital photograph by analyzing the impact of light coming from different angles of entrance. RTI produces sort of a 3D-image of the object. There will be an overview of earlier interpretations of the runic scripts written on the lion as well as an overview of Varangians in the southeast.