The thesis investigates if it is possible to replace several pumpimpellers with one controllable pumpimpeller, with a economical and a manufacturing analisys aspect. The studied pumpimpeller is mounted on a midrange wastewaterpump, N3127MT.In the thesis a contemplated manufacturing process is evaluated for a concept that are supposed to act as a controllable pumpimpeller. The pumpimpeller are studied in a manufacturing and flow matter and are presented in the thesis.The manufacturing cost is also estimated, and this has been compared to the storage cost and other costs that the existing pumpimpeller generates.The thesis also shows that the concept has minor losses in cutting quality aswell as the effiency comparing to the existing pumpimpeller.The concept also raises the manufacturing cost and this increasing cost makes the presented concept to expensive to carry through.An investigation of the costs that the existing pumpimpeller produces has also been done, and this shows that there is not that much expenses to earn regarding to for example the storage cost. The storage cost includes information from Flygt?s central storagecenter in Lindas, Sweden and Metz, France, and also an inventory about the pumpimpellers located at Flygt?s different distributors worldwide.The thesis shows that a controllable pumpimpeller will generally increase the cost for the pumpimpeller and the performance of the pumpimpeller will decrease..

Product sharing systems is recently starting to become a more common phenomenon. Carpools exist in more than 40 Swedish towns and both Stockholm and Gothenburg have established bicycle sharing systems. Other products for which sharing systems have been established throughout Sweden are clothing and tools. From the point of view of the consumer, product sharing systems is a form of consumption which can be placed somewhere in between renting and privately owning a product, where the consumers usually pay a membership fee or a monthly fee to have access to the products whenever they need them. The concept is relatively new, and there are many products for which product sharing systems do not exist.

 Saab Microwave Systems (SMW) is a business unit within Saab AB that manufactures and develops different types of radar- and sensor systems for naval, airborne and ground based forces as well as within the market for civil security. In addition to the manufacturing of radar and sensor systems they also provide different types of service concepts. The business unit has 50 years of experience within the area of developing radar systems and is considered to be one of the market leaders. When applying an assemble-to-order production strategy with products at this level of cost price the product lead-time is vital and becomes an important part of the strategy within marketing and sales. Within SMW there is a new department called Supply Management (SM) that provides the supply of incoming and outgoing material. Within SM there are four sub-departments working with activities such as planning, purchasing, receiving inspection, storage and distribution.

This study aims to examine the effect management control systems have on which goals health centers prioritize. The management control systems of one privately owned and one publicly owned health center have been studied through a qualitative case study. Robert Simons (1995) framework with four levers of control (diagnostic control systems, interactive control systems, belief systems and boundary systems) has been used to structure the study. For both health centers we found a conflict of interest mainly between the diagnostic control system and the beliefs system, where the diagnostic control system is biased towards quantitative goals and the beliefs system is mainly biased towards qualitative goals. However, despite the unbalanced levers of control the studied health centers have been able to reach a well functioning compromise between quantitative and qualitative goals..

This final year project is made for Peab Jönköping and its target group is the construction industry. The main focus is the use of unutilized building material in the most economical and environmental-friendly way. Unutilized building material is here defined as material purchased for a construction project that for different reasons not has been used. The most important thing to find out was how much building material considered as being waste is actually useable material, and how much less it costs to use that building material instead of throwing it away.When this information was gathered a proposal on how to efficiently use the unutilized building material instead of wasting it was designed. Costs and incomes were investigated and the proposal suggested a storage area where Peab can store their unused building material.

This study was conducted at Glimek AB, a company that has chosen to decentralize its central storage unit in order to increase production efficiencies. The purpose of the study was to identify the problems in the production cycle that lead to the decision to decentralize the central storage unit, as well as identifying what the decentralization entails. The effects of the decentralization have not been analyzed in the study, and consequently neither financial nor production disadvantages have been considered.Appropriate questions were formulated based on the chosen underlying theories, and were asked to selected individuals with relevant knowledge. The study is based on the information that was gathered from interviews with management as well as staff within the company. In addition, supporting information such as flowcharts, drawings, orders and decision support documents were supplied by the company.

Humanity stands before a huge challenge to lower its emissions of carbon dioxide and its use of energy at the same time as the global population is rising and the developing countries are being industrialized. A lot of newly built buildings are due to this challenge, designed to be more energy efficient but also use renewable energy resources instead of pollutant fossil fuels .Solar energy is one of the purest forms of energy that exists in abundant amounts, which is why it is most likely that it could come to play a major part in the future energy market. The main purpose of this report is to investigate the possibility to implement a sustainable energy system with solar thermal heat and  heat storage as main sources of energy in the neighborhood ?kvarteret Lagern?, which is the area where the old football stadium ?Rasunda Stadion? was located. New developments within different heat storage techniques have opened up new approaches to enable buildings an all year round heat supply from solar energy. This report will focus on heat storage in boreholes. At the present here is only a preliminary plan of how the neighborhood is supposed to be designed.

In todays sociaty the use of information systems is wide spread and many corporations and buisnesses both in large and small spread make use of more advanced and sopisticated systems. Larger corporations have their own IT sections that maintain and updates their systems on a daily basis. They have the money and resources for it by how do the small businesses coop with it. How satisfied are the small businesses that are maybe runing on systems that might not be supplying the needs that the business is in need of. In this paper we investigate this question in the form of a questionnaire.

The aim with this report was to exam and surveys the internal logistics of Proton Finishing?s production. The basic data should give the company suggestions of more efficient and improved internal logistics. We will also give from our perspective suggestions of improvement, which the company will be able to evaluate.To evaluate these problems we used different kinds of methods. A frequency study was made on the internal forklift.

Due to a growing interest in communication in today?s society the demand for equipment that is used in communication networks increases while the competition between companies that produce this equipment grows. To meet the increasing demand and at the same time having a competitive product development many companies use some effective product design, such as the modular product design. When a modular product design is used it?s good to compare different module configurations for a certain product and to simplify these comparisons some tool can be used.

The aim of this Master thesis is to investigate the similarities and differences between a traditional and a new classification scheme. Two classification systems are compared, "The Swedish Library Classification System" the SAB-system - and Yahoo!. The SAB-system has been used in Swedish libraries since the beginning of the 20^th century, and Yahoo! has been online since 1994. Yahoo! has a Swedish version of its international original, which is used in this study to get a similar starting point with the SAB-system. The method used for this is a content analysis, which in this case is not a quantitative analysis.

A sequence of actions in the world have influenced the information science, one of these actions is the lateral movement in how companies use their IT-systems. IT-systems today, in comparison to before, are used by companies to improve their relationship with their customers. Every year a big amount of money is spent on developing and improving IT-systems. That is why it is important to develop and create IT-systems that are clear, and which encourage, enable and simplify a user?s action.

Sekretessbelagd.

Soil properties affect the chemical composition of soil water. When studying transport of chemical substances through a basin, it is therefore important to know from which soil layer the main part of the runoff is generated. The aim of this study is to develop an HBV/PULSE model with merged soil moisture and response routines, which generates good approximations of groundwater levels. It should be possible to extend the model to simulate transport of substances and take into account which soil layer the groundwater level is currently in. The hydrological version of HBV/PULSE is used since there is no need to account for pH or alcalinity at this stage.

With increased deployment ofintermittent renewable energy, such aswind and solar power, energy storagebecomes necessary to help reduceproduction peaks. Thermoelectric EnergyStorage is a method still in researchphase, which stores electricity in hotwater at a temperature of 120 ° C. Thisthesis aims to examine whether theThermoelectric Energy Storage would bepossible to integrate into existingpower generation such as a combined heatand power plant, and how the technologypotentially could function in theelectricity market. ThermoelectricEnergy Storage consists of a chargingprocess and a discharging process, bothoperating by the working fluid CO2. Toincrease the efficiency of theThermoelectric Energy Storage, wasteheat from the district heating networkis integrated.A model of the Thermoelectric EnergyStorage has been developed and it wascalculated by thermodynamic propertiesof the working fluid, CO2, in thevarious process steps.