As the speed and complexity of computers have increased so have software and the expectations of users. Software development follows a straightforward evolution where complicated tasks are made easier by better tools; this repeats itself as those tasks in turn are automated.Software mechanics that were seen as revolutionary a decade ago are seen as obvious requirements that no multimedia application can be without.dotNet is the next step in line and makes it easier and faster to build software.This report focuses on the development of a multimedia platform developed in dotNet. It does this by developing the tools and framework from which a complete game can be built.A game is selected because it combines the most aspects of multimedia development, such as interaction, graphics, sound & music. The report goes further by describing why the game looks like it does as well as the mechanics of the game and the benefits of the dotNet platform..

There are several energy systems in the Swedish society and to ensure the comfort and health of the citizens it is of importance that the different energy systems are functioning properly. District heating is one of these energy systems and many household depend only on district heating to warm up their homes. District heating is dependent on several processes where every step needs to function in order to deliver the produced heat to the end consumer. Previous studies have investigated the distribution of district heating and how to make customers choose district heating as their heating method. The supply of fuel to the district heating plant has not been studied as much, even though it is an important part of the whole system. This thesis is a part of the project NORD-STAR (Nordic Strategic Adaption Research), which has focused on climate adaption in the Nordic countries.

The thesis that follows is performed in collaboration with Nitator in Oskarström.The factory in Oskarström focuses on laser cutting, robotic welding and surfacetreatment of steel for the automotive industry.The project aims to streamline the flow of materials in production by automatingthe movements of the forklifts, running to and from the interlayer, and betweenworkstations.The project started with a systematic literature search. The literature searchshowed the research position around the AGV-system. Also a review of studentliterature was made, so that a suitable method for practical implementation couldbe developed and applied. Selected method uses both quantitative and qualitativeapproaches, which is analyzed by using triangulation.The work has resulted in a modified layout of the current facility in Oskarströmthat can be used for the implementation of the AGV-system. It has also resulted inthe tender documents and profitability calculation from several of AGV-suppliers..

A persistent problem in the construction industry is its low margins of profit. It is often difficult to earn money due to low efficiency and high costs. Logistics on the construction site answers for a large amount of these costs and it is therefore of interest to find new, more efficient logistic solutions. The purpose of this thesis is to compare two different logistic systems and further to evaluate which one that is the most efficient and profitable. A comparison is made between the traditional logistic systems used for years and a new logistic system developed by an industry association called BEAst.

This thesis, drawing from several empirical investigations, reaches the conclusion that there seems to be a positive correlation between the level of democracy and the level of state capacity in Latin American countries. This correlation is explained by a hypothesis derived from Rational Choice theory. With some important caveats, this conclusion is then applied to the discussion about democracy as a form of government. Within democracy, the thesis also offers an insight into different electoral systems and its possible implications, mostly on a theoretical level. The thesis only exists in swedish as of yet..

Idag arbetar avdelningen för extern produktion vid BAE Systems Hägglunds med produktions stödjande uppgifter för leverantörer av Build-to-Print komponenter. En allt större del av BAE Systems produkter konstrueras av BAE Systems konstruktörer medan tillverkning genomförs av leverantörer. Denna förändring har skapat ett behov för BAE Systems att kunna stödja leverantörer i produktionsprocessen för att förhindra att kvalitetproblem uppstår. Den produktionsstödjande uppgiften blir också viktig då det finns en vilja på BAE Systems att kunna genomföra kvalitetssäkring hos leverantörer innan ankomst. Dagens arbetsprocess för produktionsstöd har vuxit efter olika leverantörers tillfälliga behov vilket har gjort att inget standardiserat arbets- eller kommunikationssätt finns.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

This report consists of a discussion about suitable methods for studying complex sociotechnical systems that are still being developed. There are large economical advantages with studying new systems before they are completely developed since problems can be discovered early and thereby avoided. It is, however, difficult to study developing systems, there are methodological limitations. These limitations are discussed and recommendations for studying non-existing complex sociotechnical systems are presented.The report is based on experiences from a study of the introduction of a shipboard helicopter on the corvettes that the Swedish Armed Forces are developing. A shipboard helicopter implies high requirements on the hosting ship.

The main focus of this master?s thesis concerns the relation between subject representation, power and gender. Classification systems and subject heading lists are products of their cultural and social context and some subjects and disciplines are given a greater value than others. Our aim in this thesis is twofold; to discuss and critically analyse the prevailing gender norms that are expressed trough classification systems and subject heading lists and to examine how they manage to represent gender studies as a multidisciplinary subject in theory as well as in practice. We are also discussing the particular problems with the representation of multidisciplinary subjects in general.

As organizations are generating more business intelligence in their systems, more employees need access those systems. As a result some sort of permission management needs to be implemented to ensure the information remain safe. Access Control Matrix (ACM) is one way of managing permissions and is widely used among organizations. The issues that comes with ACM is that the matrix itself gets difficult to manage and overview as its complexity increases with the number of permissions. The study utilizes Action Design Research to develop a tool for visualizing permissions.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

As the ability to computerize processes and tasks increase, the proliferation of complex systems in our society continues. How these systems are deployed in the organizations where they are meant to be utilized has been shown to have a large impact on how well they function.In January of 2011 the Enköping hospital initiated the deployment of an IT-support for drug management, a module in the general health care system Cambio COSMIC. Other health care providers in the county, and in the rest of Sweden, have had mixed feelings toward the module. Some have outright refused the module, claiming that it is detrimental to patient safety. One of the arguments for deploying the module in Enköping, however, was that it was needed to improve patient safety.The Enköping hospital is considered to be a well organized institution with good leadership and earlier good experiences regarding IT-systems.

In this essay, Neolithic potsherds from Alby, Öland has been examined. The purpose was to investigate the connection between the lipid residues and the vessel shapes and ornament. To solve the attempt lipid and morphological analyses were executed. The lipid analysis revealed traces of different food residues and the morphological method showed various shapes and decors. The result indicates that the Alby ceramics has been used for cooking/storage of different fish and meat dishes, as well as vegetables and that the vegetables doesn?t derive of cereals..

In today's producing companies, there is a high demand on early integrated productdevelopment. One way to facilitate communication between departments and collaborationbetween people and thereby enable early sharing of product information within the companyis to use PLM, Product Lifecycle Management.The CAD environment at Scania is at the moment being upgraded from Catia v4 to Catiav5. In this stage it is important that also the interacting computer systems in Scania?s PLMenvironment are adjusted and in the future join the development. Scania has an idea of howthese systems will be developed as the transition from Catia v4 to Catia v5 is being carriedout.