Mechanization of Swedish agriculture started in the beginning of the twentieth century, to be able to have more animals without raising the number of employers. The horse business has not by far kept up with these cost savings solutions. Cleaning out stables and feeding horses are the most time-consuming tasks in horse stables today. The most common way to clean out the stable is still by shovel and wheelbarrow. The clean out process can easily be mechanized through semi- permanently beds with movable walls between the boxes so that the litter can be removed by a tractor or a loader.

The aim with the literature study is to inform about the risks that exists in large dairy farms(with focus on mastitis and hoof health) and to inform about the milk industry in Sweden.Personal comments from two study visits (Nötcenter Viken and Vadsbo Mjölk AB) arelinked together with the literature and forms into a discussion regarding sustainableagriculture versus the milk cow's welfare.The profitability for Sweden's milk farmers have decreased because of the decreased milkprice and current inflation. This leads to an increase in herdsize in order to make a profit.The milk cow herds in Sweden becomes fewer year by year and the herdsize increases. Theincreased herdsize can cause a decrease in the time the farmer spends per animal. This canaffect early disease detection and prolong the animals suffering.Swedish Board of Agriculture published (2008) statistics showing that today's milk cow ismedicated primarily because of two reasons; mastitis or hoof problems. Mastitis is thereason to two thirds of all treatments that are carried out.

Scania Top Team is a competition where the best mechanics in the world are competing against each other. In 2011, the world final was recorded and this material is now used to see which problem solving strategies these top of the line teams are using to solve the realistic problems assembled in front of them. To help them, the mechanics are allowed to use two of Scanias IT-systems: Scania Multi and Scania Diagnose and Programmer 3. This report consists of two parts. The first part is the development of a method to analyze the recorded material.

This thesis studies the concept of balance in the management control systems (MCS) of a small Swedish company within the IT-sector. The aim is to evaluate the importance of balance and dynamics in MCS and investigate which factors affect them. The frameworks used are Simons (1994) four levers of control, and the five-factor model for balance and dynamics by Mundy (2010). The small IT company - the object of the case study - has grown extensively in the last years and needs to develop more formal MCS without losing efficiency and creativity in their fast-moving industry. The case study reveals that balancing MCS is important also in smaller companies with less formal MCS.

The mainpart of this thesis is about the developing of a new analysis tool to be used in Zenicor Medical Systems AB ECG-system. The primary task of the system is to simplify the ECG survey for patients who suffers from different kinds of arrythmias, for example heart fibrillation. With this system is it possible for the patients to do their ECG survey by them self at home and then send the signal with their telephone or mobilphone to a server. The equipment used to do the survey is not bigger than you can have it in a pocket and this results in a bigger flexibility for the patient. A doctor can connect to the server and analys the ECG-curve and follow up the patients condition..

The existence for companies today consists of constant challenges with customers that want more individual products with high quality as quickly as possible. For a company to be able to have a short delivery time, it must also have a short production time. This makes streamlining and improvement of processes a big part of a company?s workThis thesis has been carried out together with the company Lasermax Roll Systems AB, a world-leading manufacturer of feeding, finishing and monitoring systems for high-speed digital printers. They manufacture their products according to the assembling for costumer order principle.The purpose with this thesis is to map and analyze, the assembling process and the test process at Lasermax Roll Systems AB.

Today significant resources are provided to improve the digital work environment within the Swedish healthcare to create efficiency, good work environment and patient safety. Despite this, major flaws are shown by the lack of communication between the eHealthcare systems. This becomes a stress factor among healthcare professionals because of increased administration and decreased physical contact with patients. The purpose of this study is to create a understanding of the concept of interoperability at different levels in the eHealthcare systems. This has been conducted through a qualitative interview study at a healthcare center where the respondents have been describing their digital work environment and the way it works today.

Problem: Our opinion is that it is important to consider about usability in system development. In this thesis we will focus on usability in point-of-sale systems. The point-of-sale system we base this thesis on is Extenda Retail. Our case study is performed on Ica Kvantum in Bromölla, which implemented Extenda Retail about two years ago. Purpose: The purpose of this thesis is to figure out what important factors there are to consider, in usability aspects, when developing point-of-sale systems, with focus on the cashier. We also wish to find out the cashiers opinions about the Extenda Retail system. Method: The information gathered for this thesis consists of literature and interviews.

As a company it is required to work with strategies to minimize costs such as packaging and logistic costs. The increased market of industrial produced wooden buildings results that the time and the cost which the packaging of prefabricated building elements consume, is experienced to be in greater need of development than before and demands a better solution. The aim with this dissertation was to discover how the development of the handling of the packaging can improve the packaging process. The goal was to present improvement proposals for a simplified and thereby a more efficient production in time and cost perspective.The packaging process which includes packaging, handling, storage and transport were studied. Interviews were made with participants from the market for manufacturers of wooden houses and a case study was made at the company A-hus.

The objective of this study was to make an inventory and a potential analysis of the organic beef production in the region of Gävleborg, Sweden. A survey was conducted, where a questionaire was sent to all farmers in the region who had environmental subsidies concerning organic cropping systems in 2001. In total, there were 701 farmers, of which 46 % participated in the study. Three slaughter houses were interviewed to get their pictures of the development of organic beef production. The study shows that there are potentials and interests in the region to increase the production of organic beef.

This report is made as a literature review, focusing on the work done to increase understanding of efficiency in the categories of substations and secondary heating systems, with respect to the deviation from the theoretically possible cooling off in the distribution network as well as the economic benefit that appear. The main purpose of a considerable part of the literature used in this report addresses the issue of identifying individual causes of reduced cooling in district heating systems. These literature resources have been compiled and summarized as part of the report.The technology of district heating is associated with benefits such as better use of the energy in a fuel. This is the case of cogeneration plants where serial generation of electricity and thermal energy increases efficiency compared with the parallel generation where heat is generated locally and electricity is generated centrally. Serial generation thus allows for lower primary energy demand.

This thesis presents a comparative study of image registration at two picture collection libraries. The two registration systems are analyzed as to the theoretical principles behind them and their practical application, and related to theoretical tools for subject analysis and bibliographic standards. While a growing number of picture collections now digitize their material, generally accepted standards and methods for the registration of digital images are still lacking. Many different systems coexist, often developed in-house in response to ad hoc needs and based on traditional registration tools created for textual documents, resulting in internationally incompatible mixed-format systems. The two picture collections examined here, however, have opted for similar, standardized tools for registration and subject analysis, and while there are differences in their application and focus, they have both considered issues of cross-system compatibility.

As the information society becomes increasingly flooded with digital images, the need for efficient image retrieval systems increases as well. To handle the vast amounts of data involved, the indexing process needs to be run automatically, using content-based descriptors extracted directly from the digital image, such as colour composition, shape and texture features. These content-based image retrieval systems are often slow and cumbersome, and can appear confusing to an ordinary user who does not understand the underlying mechanisms. One step towards more efficient and user-friendly retrieval systems might be to adjust the weight placed on various descriptors depending on which image category is being searched for. The results of this thesis show that certain categories of digital images would benefit from having extra weight assigned to colour, texture or shape features when searching for images of that category..

In a comparing survey this thesis investigatesclassification systems for dams in Sweden, Norway,Finland, Switzerland, Canada and USA. Theinvestigation is aiming at an understanding of howpotential consequences of a dam failure are takeninto account when classifying dams. Furthermore,the significance of the classification, regarding therequirements on the dam owner and surveillanceauthorities concerning dam safety is considered andreviewed. The thesis is pointing out similarities anddifferences in the line of dam safety.The survey of dam safety is firstly based upon legalrequirements in the different countries andsecondly on guidelines regarding dam safety. Damowners generally are ultimately responsible for thesafety of their dam, and often have their ownroutines regarding how this safety is to be achieved.In this thesis, however, the legal requirements aremainly focused upon.The investigation has resulted in an outlining ofeight areas, where the classification systems in thevarious countries have been compared.

This report presents a method for modelling a computer system from a security perspective. The questions that are going to be treated are:? What defines a secure system and how does the company relate to these factors?? What are the threats today based on hardware/software, human factors and company routines/policies?? What measures should be taken for the organisation to reach a higher level of security for their systems?? How do we develop a method for classification of security and what components should it contain?? What changes are reasonable and necessary with the respect to the company?s resources?The report has been done through interviews and analysis of existing systems on Fla?kt Woods AB. From analysis of material, the aspects judged relevant to the subject and to the company?s needs, have been compiled to a document.