The aim of this study was to examine how children in the age of 5 are communicating in play at the preschool and how their fantasy games are different from each other. In this study, I have gained a greater insight on how to control children's imagination games.My approach has been the observation of three fun times where I also used me out of a voice recorder to record children's voices when their children are communicating with each other during the time of play at the preschool.The results of my study showed that children's fantasy games based on children's past experiences in which children use different themes and characters. The children's communication activities are different from each other. Children have different themes but the deck is based on imagination and communication.Fantasy games that children perform is rooted in the experiences that children get through to experience and see the reality.

Because of increasing demand of power on Malmbanan the capacity of the existing wires which supply the trains must be increased. This increases the stress on the existing poles and for this reason the system for supplying the loads along the railway is to be removed from the poles and be replaced by some other system. This thesis is a study on a two-level low voltage (1 kV and 0.4 kV) electrical system with the aim to investigate if it can be an alternative to the system used today taking into account the voltages, fault currents and costs.In this thesis the following tasks have been performed:? Gathering of data? Description of basic theory? Loadow and fault current calculations of the system with MATLAB? Life Cycle Cost estimate of the system? Analysis and conclusions from the resultsThe results show that the new system can be an alternative to replace today's system. The simulations and calculations show that the voltage drop is at an acceptable level and that the fault currents are large enough to supply a safe disconnection if a fault occurs at the far end of the system..

When working with market communications it is important that ones brand is noticed and remembered, for which the marketer has many tools at hand. This study compares the communicative effects of PR and paid advertisement on consumers, in response to the underlying purpose to provide a theoretical framework for better understanding the relative effects of the two tools. In the struggle for consumers? attention we find ads to be a tool to achieve wider brand knowledge, whilst PR is rewarded more extensive elaboration once noticed. The study also affirms the causal link between communication credibility, attitude toward the communication and brand attitude.

During twelve weeks of practice experience at the company Sydved AB, I received the mission to develop a structure for the company?s internal communication. A part of this mission was to find out what the company?s employees thought of Sydveds internal communication and the most important; Sydveds intranet called ?Outlook?. Due to Sydveds plans of developing the intranet I designed and accomplished an inquiry-study to find out about the employee?s opinions on the company´s internal communication and in particular their intranet.The answers I want from this study are if I shaped the inquiry-study correctly the first time.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

A vulnerable group in society is people with ASD (autism spectrum disorders) or autism. This group seems to increase, mainly due to genetic factors but also environmental problems. Medical research has accelerated in the U.S. and Europe. The biggest problem for people with disabilities is the inability to communicate, both verbally and socially.

Purpose: This study aims to investigate the conditions that prevail when companies put their marketing in social media with the purpose of creating a perception of the risks and opportunities it brings to businesses and ultimately how it may affect the corporate image and identity.Theories: The basis of the problem area are presented through a theoretical framework with the purpose of highlighting the notions of social media, communi- cation, marketing communication, groundswell, corporate identity and image.Methodology: To investigate the research questions this study adopted a qualitative approach in which the authors study the properties of a phenomenon in order to seek a deeper understanding of the problems we have presented. There is an exploratory approach to knowledge and the authors have chosen to conduct qualitative research interviews based upon three themes: driving forces, challenges and impacts.Conclusion: The study revealed that traditional models of communication are no longer applicable in social media. Companies are up for a challenge and must clarify their sole purpose when establishing communication in the social landscape. The general motivation for marketing in social media is making profit, however, building relationships is not a natural motive for most companies. The risks companies expe- rience is the exposure caused by social media and the study also reveals that this fear is firmly attached to their lack of knowledge of these new channels of communicat- ion and their primary areas of use which indicates that skilled employees plays a vi- tal role with their use of social media in their communication process.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The aim of this study is to find out if there is any difference between how a state-owned company and a publicly listed private company communicate its sustainability performance in its sustainability report. It also aims to find out if the communication regarding sustainability has changed over time. The poll was conducted in two Swedish companies, Sveaskog AB and AB SCA, operating in the forestry industry and through a quantitative content analysis, the companies' sustainability reports from 2005 and 2010 were examined. To get a result, the reports has been examined by the GRI framework (Global Reporting Initiative) and an assessment of the communication was made based on a scale of 0-3. The results has been evaluated based on stakeholder theory, legitimacy theory and the growing interest in CSR. The analyses found evidence that there is a link between the form of ownership of the company and how it communicates regarding sustainability.

The aim of this study is to gain knowledge about the internalcommunication at a public library in Sweden, focusing on the flow of information and the library employee?s role as a source and receiver. This is an important subject because internal communication affects not only the internal work, but also the users. Despite this there are few studies about internal communication in libraries. The research questions used are: How do the employees perceive the role as source of information, and what choices do they make before they spread information? How do the employees perceive the role as receiver of information? How do the employees feel that the information flow works in the organization as a whole?The research is founded on five qualitative semi-structured interviews with the library employees.

AbstractTitle: External communication channels of Prime Care How they where thought to be, how they work and how costumers apprehend them.Number of pages: 50 (64 Including enclosures)Author: Sophie DicksenTutor: Peder Hård af SegerstadCourse: Media- and Communication Studies DPeriod: Spring 2007University: Division of Media and Communication, Department of Information Science, Uppsala UniversityPurpose/Aim: The focus of this paper lies on the external communication channels of Prime Care and the aim is to study the following aspects: How do the channels work? How are they apprehended by customers of the company? What are Prime Cares own thoughts behind the channels? How does Prime Cares self-image correspond to the way that customers apprehend the company?Material/Method: Twenty interviews has been done with different customers of Prime Care in order to see how the company and its communication flow is apprehended. A consultant manager of Prime Care has also been asked about purposes behind the companies external communication channels in order to enable a comparison between Prime Cares image and profile. Prime Cares website, one of their mail sendouts, their salescalls, salesvisits and their exhibition participation have been studied on the basis of relevant litterature. Maletzkes model of mass communication was used as a general view of communication flow.Main results: All communication channels included in this study have different ways of function even though they all have the same main purpose, videlicet to promote the company, to inform about its activities and to recruit new customers and consultants.

AbstractBackground: Becoming a parent to a child in need of Neonatal Intensive Care can be a traumatic experience. During a time when the parents may need support, guidance and a sense of control ? the family might need to relocate to a hospital away from home if the child needs highly specialized medical care at a Neonatal Intensive Care Unit. Aim: The aim of this study is to investigate the parents? experience of having to change neonatal care unit.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.