This master thesis was initiated with the aim to answer at what level of installed capacity of wind power in the northern parts of Sweden it would be beneficial to improve the transmission capacity from the northern Sweden. During the process of this work the aim has changed to try and create a model that can be used to analyze how well the hydro power installed in the northern Sweden can even out the quick changes in wind power production.To create a good model of all hydro power in northern Sweden is a very large job, unfortunately too large for a master thesis. This report therefore ends with an extensive analysis of the simplifications that have been made and their effects as well as a list of the future work that has to be done.The model that has been created have shown to be effective and produce good results. The conclusions that can be made is that the northern Swedish hydro power have very good possibilities to balance the wind power production. Only a few cases where water have been spilled even though there has been some free capacity has been discovered.

This master thesis states the following questions: Is it easy or difficult to retrive information from a mobile phone manual? How can the search process be described among user for a mobile phone manual? What similarities and differeces can be identified between users? Arhe there any variables that affect search performance such as reading skills or technical domain knowledge? Eight mobile phone users participated in an empirical observation and the scope was to find information in a paper version of a mobile phone manual according to given tasks. The results shows that some users has problems to retrieve information due to that the correct page in the mobile phone manual could not be located. The results show that the user is using several search strategies, for example the table of contents and the index, when trying to locate information. The results also revel that the user initiates multiple search steps before the correct information can be located.

 This report is an evaluation of Peab's purchase and call-off system, PIA.PIA is used to order goods for Peab's construction sites. The background to the work is that users of the system have understood the system cumbersome to use when purchasing goods for construction sites. The evaluation was carried out by the interviews and tests with users of the program, in this case, supervisors and site managers at the company. Ten users of the system were interviewed and eleven people have carried out a test order.The focus is primarily on the test order that users have implemented, which has been clocked and analyzed for time and cost. The evaluation is also a user analysis concerning how the users perceive the program, mainly in terms of usability, functionality and benefits.The result of this report shows that PIA is economically profitable to use for the purchase of goods for construction sites.

[Saknas].

The aim of this study was to detect antibodies in swine serum against proteins in soy beans, wheat, oat and barley. Two methods were used: agar gel immunodiffusion test (AGID), and SDS-PAGE followed by immunoblotting. The sera examined originated (I) from piglets younger than one week (negative control), (II) pigs from a feed trial with soy bean in a herd with PMWS, and (III) pigs inoculated with Brachyspira hyodysenteriae and Escherichia coli after being fed with soy. The AGID-test was negative concerning all examined sera which were analysed against proteins in soy bean, wheat, oat and barley. In the experiment based on immunoblot antibodies were demonstrated within all three groups of examined pigs.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with value stream mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated.

A report on my thesis developing an algorithm to automatically classify a mammogram image as containing an implant or not and segmenting and masking any present breast implant in the image..

The report assesses the typical questions regarding Corporate Social Responsibility within the automotive industry. An attempt as to whether Corporate Social Responsibility has an impact on growth companies is demonstrated. Volkswagen Group is within the required analytical criteria, which are to be studied. Also, the fact that they recently launched ?Strategy 2018? makes it even more interesting to immerse into.

Our purpose is to report on a few of the internal and external factors that influence a person to choose and dare to start his own company, instead of being employed. We would also like to get an insight on what is of strong importance when you establish a new company. This will be done with a theoretical and empirical study..

This thesis is about a part of the marquetrytechnique, scorching. Scorching is made by heating up something, put a veneer into the heated substance and make a controlled burning. This technique is old but still used today and have according to me great potential for development. In my work I wanted to give the scorching greater room then I earlier have seen. I wanted the scorching to be the dominant ingredient for a decorative element in a piece of furniture or an interior.

Internet is growing every day and this is leading to an address depletion of the current IPv4 addresses. A new version of IPv4, called IPv6, is the protocol for addressing computers that will deal with this problem. IPv4 and IPv6 are unfortunately not compatible with each other. IPv4 and IPv6 have to co-exist for a long time until IPv6 will be the dominant protocol.The purpose of this thesis is to examine how a transition could be done or more correctly, how to deploy IPv6 in an already existing IPv4 network. After that part of the report a case study at the local Internet service provider Junet AB will be conducted.

This report aims to suggest recommendations that will increase the efficien¬cy in theconstruction process of a construction project. Through interviews, studies of budgetcalculations and examples given by the project management at the construction sightsan understanding of some complications have been gained. These complications havebeen tracked back in an attempt to find the source of the problem, and at the end ofthe report some suggestions have been presented with the pur-pose of preventingthese complications. Through the interviews it is suggested that many complications re-late to lack ofcommunication and motivation due to poor planning be-fore and during theconstruction process, a suggestion that is supported by the study of the budgetcalculations. The examples from the project management also points out someshortages in planning, but also coordi-nation related complications due to lack ofcommunication. To prevent these problems the recommendations suggested at the end of thisreport aims to improve the planning process through a properly fulfilledwalkthrough-planning of all of the construction activi¬ties during the time needed todo so. It is also suggested that the company uses experience from previous projects inorder to reduce costs, and that the qualifications of the employees is being appliedwhere it is needed.

At Uppsala university scientists have during the last years developed and built wave energy converters. This project is called "Lysekilsprojektet". The development has come so far that they are currently investigating how to gain profit in a mass production. For that reason they want to automate as many steps in the production as possible.The winding of the stator is one part that is being automated using industry robots. The stator is cable wound unlike many other generators.

This report describes the design and implementation of a multi-master, packet based protocol for small and tiny microcontrollers where resources are limited. The protocol was named "Tiny Controller Network" or TCN for short. The protocol is meant mainly as a control bus for automation and sensor acquisition applications but due to its flexibility can also be used for other purposes as well. It borrows some of its functionality and design ideas from the well known CAN bus and Modbus but also has a number of major differences like the use of standard hardware and time synchronisation. One of the key aspects during the design was the use of very little system resources and common on-chip hardware peripherals like a UART.

Abstract (in English) The report clarifies how the economy of Värnamo and Tingsryd area experiencing and implementing APL, it also reveals their need for jacking from the school to improve students achievement.By highlighting some of the requirements, expectations, obligations and rights as schools, businesses and students have between each other can enhance our understanding of each other's activities. With increased understanding of each other's needs, function and values can be a more seamless cooperation take place which can increase the efficiency, usefulness and effectiveness of APL and apprenticeship.The investigation of the report includes a survey of 25 questions that companies involved in APL answers and interviews by two well-designate individuals in the subject, Jonas Olofsson, who among other things, wrote the book "Krisen i skolan" and Annika Jervgren is research assistant in the National Apprentice Committee.The supervisor's actions during the APL are addressed and they are critical to student achievement and how the profession is perceived. It is also evident that there is a desire for increased communication between schools and businesses and that practice is governed by established documented procedures to make the workplace time will be as constructive as possible for the students..