Water hardness indicates the concentration of calcium and magnesium ions in water. Water with high concentrations of these ions is described as hard water and water with low concentrations is described as soft water. Water that is too hard or too soft can lead to technical and economical problems. In collaboration with Midvatten AB, groundwater hardness in the Badelunda esker between Leksand and Avesta has been mapped, and an attempt has been made to explain the variations. For this purpose, different GIS programs, such as ArcView, ArcInfo, IDIRISI, and one geochemical modelling program, PHREEQC, has been used.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

A lot of mine waste rock and tailings arise from all mining processes and have to be stored in an appropriate way. Tailings are deposited in impoundments retained by tailings dams. The objective of tailings dams is to retain the slurry from the mining process and in that way prevent spill into the surroundings that might be harmful for the environment. Tailings dams are often constructed as staged embankments so that construction costs and demand of materials are spread more evenly over the period of deposition.The objective of this thesis has been to compile information about and evaluate events at Swedish tailings dams and also to develop a collective database for all Swedish mining companies for all tailings dams and all events that occur at tailings dams.Information about 60 events at Swedish tailings dams has been gathered and evaluated. The evaluation has been performed by comparison between and analysis of individual parameters and also by use of a multivariate statistical method called PLS.

The system tungsten-oxygen has potential of being suitable for decorative coatings since ceramic coatings are often hard and wear resistant, and since modulations in oxygen content or incorporation of small ions could give bright colours. The aim of this report was to investigate the relationship between process parameters and  the properties of the films, with the wear resistance being of special interest.Samples with tungsten to oxygen ratios in the range of 100:0 to 25:75 at% were made using reactive sputter deposition, either with constant gas flow, or gas flow controlled by optical emission of the plasma. The hysteresis of the system, which means that a certain gas flow will cause different pressure and/or target voltage depending on in what way the flow is reached, makes it interesting to control the process where the system makes the steep change from metallic tungsten to ceramic tungsten oxide. This is difficult and thus requires precise control equipment.The samples were analysed using X-ray diffraction, X-ray photoelectron spectroscopy and an empirical wear test suitable for small components like cell phone cover for example, in order to characterize the structure, composition and wear resistance of the coatings. The results could be divided into three groups: (I) tungsten-like, with very low oxygen content; (II) mixed phase and (III) tungsten oxide like, with oxygen content close to 75 at%.

The concentration and storage of organic chlorine and chloride were determined in soil, to a depth of 40 cm, in a coniferous forest in the Stubbetorp catchment area in south-east Sweden. Also, the spatial distribution of the two forms of chlorine was determined. Soil samples were collected at 49 of the nodes in a grid with approximately 105 m between the nodes. The analysis of spatial variability suggested that no spatial autocorrelation was present either within the variable organic chlorine or chloride. This means that no sample was more influenced by another nearby sample, as compared to other samples further away.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

Denna uppsats behandlar service, ett fenomen som har växt sig starkare de senaste årtiondena och som har kommit att bli ett avgörande verktyg för många företag för att kunna skapa marknadsfördelar. Att ett företag förvaltar mötet dem och kunden emellan på bästa sätt är ofta en kritisk faktor för att få kunden att återvända till butiken även nästa gång. Vissa företag är mer och andra är mindre beroende av ett bra servicesystem och därför är syftet med denna uppsats att undersöka huruvida serviceförväntningarna hos två olika kundgrupper liknar eller skiljer sig från varandra. Kundgrupperna som valts ut tillhör konfektionsföretagen, H&M som är en kedja i lågprissegmentet och Acne som är ett företag i högprissegmentet. Frågeformuleringen som besvaras i uppsatsen gäller som följer: Hur skiljer sig H&M-kunden från Acne-kunden i sina förväntningar på service i butik? För att besvara frågeställningen används en kvantitativ metod en så kallad muntlig strukturerad intervju som är riktad mot de två kundgrupperna.

Title: Point of Purchase TV-screens - An analysis of Gender and Generations in the In-store-Retail-EnvironmentDate of Seminar: May 29th 2007 Course: BUS 809, Master Thesis in International Marketing and Brand Management.Authors: Søren Berg Jørgensen, Daniel McCartney and Ben Wallenborn.Supervisors: Karin Alm and Ulf Johansson Keywords: In-store Marketing, Point-of-Purchase, In-store TV, Gender, Generations. Thesis Purpose: The purpose of the thesis is to contribute to a greater understanding as to how consumers react to and perceive PoP TV-screens within the in-store retail environment. More specific, the aim of the study is to investigate if gender and generations react and feel differently towards the use of PoP TV-screens. From a practical standpoint, the study will aid marketers in how they can communicate more effectively with their target-market inside the store. In addition to this, the study will provide retailers with an insight into the overall atmospheric effect that the placement of TV screens has on stores.

In 1886 Hans Hildebrand received a Bronze Age hoard found in a field that belonged to Eskelhem´s rectory. A record was made where Hildebrand presented and documented the artifacts. The following year Oscar Montelius reviewed the artifacts, which he described as horse gears. He compared the horse gears with similar artifacts found in Europe that roughly had the same dating in order to trace the origin of the hoard.  Montelius conclusion was that the hoard was created on Gotland around 500 BC.

Bakgrund: Deposition av fibrillär amyloid beta 1-42 (A?) i hjärnan är ett välkänt kännetecken för den neurodegenerativa sjukdomen Alzheimer?s (AD). Dessa ansamlingar påverkar pericyter, en celltyp involverad i blodkärlsfunktion och upprätthållande av blodhjärnbarriären (BBB). Pericyter uttrycker både receptorn low density lipoprotein receptor related protein 1 (LRP-1) till vilken A?1-42 binder, och proteoglykanet NG2.

This master thesis has been performed at the department of Machine Design at KTH, The Royal Institute of Technology. The thesis has been a part of a global development project in collaboration with Luleå University of Technology, Lund Faculty of Engineering and Stanford University. Corporate liaison and sponsor has been Immerse Global Inc. The project was also performed on sponsorship from the Product Innovation Engineering Program, PIEp. The thesis is a representation of some of the contributions made by the authors.The lack of clean drinking water is one of the key issues facing the world today.

At the end of April 1986 reactor number 4 of the nuclear power plant at Chernobyl explod-ed and large amounts of radioactive particles were then released into the atmosphere due to both the explosion as well as the consecutive fire of the graphite core. A cloud of radioac-tivity was spread over the northern hemisphere, including Sweden, due to the prevailing wind directions. The radioactive particles were washed out from the cloud by rain and snowfall in some areas of Sweden and deposited on the ground. The deposited radionu-clides, primarily cesium and iodine isotopes, were later absorbed into the soil and taken up by the roots of the plants. Some of these radionuclides, like 137Cs, still persist in some of the terrestrial ecosystems at relatively high concentrations which lead to contamination of the meat of moose, roe deer and wild boar even today.The two municipalities Heby and Uppsala, in the eastern part of central Sweden, experi-enced a relatively large deposition of 137Cs which resulted in high levels of 137Cs in moose and other game.

The eutrophication of lakes and seas with the algal bloom and deficiency inoxygen that follow, has been given priority by the Swedish government as oneof 16 environmental objectives. The purpose of this project was to develop a toolbased on a simple model, limited amount of data and geographic informationsystem (GIS) to identify areas with risk for phosphorus losses due to surfacerunoff. This tool can act as a decision support to decide where appropriatemeasures should be applied with the aim of reducing phosphorus losses and bythat the eutrophication.The method that has been used is a combination of two models, one calculatingthe potential erosion while the other one identifies areas of erosion (net erosion)or deposition. This ability is of great importance because potential erosionshould be calculated on areas with net erosion. Areas with high potential erosionhave an increased risk for phosphorus losses due to surface runoff.The potential erosion was calculated based on factors which describe how topography(LS), land use (C), soil type (K) and precipitation (R) effect the erosion.All of them have been modified to a greater or lesser extent.

This Master of Science thesis was completed at the Department of Machine Design at the Royal Instituteof Technology in Stockholm in collaboration with Lund Faculty of Engineering, Luleå University ofTechnology and Stanford University. At Stanford University a global product development project wasrealized as part of the course ME310. The project was initiated by the American company ImmerseGlobal whose vision was to develop a new type of Atmospheric Water Generators, a machine that absorbsthe moisture in the air and via a water system transforms it to pure drinking water. The project was partlyfinanced by the Product Innovation Engineering program, a Swedish research and development programfor increased innovation capability in organizations.In parallel with the global project in the ME310 course the product development process was studied inorder to compare it with a product development course at the Royal Institute of Technology, IPU. Thetwo courses are similar to each other in several aspects.