Most of the portable electronic devices use a battery as a primary power source. Nowadays, when the applications are becoming smaller and smaller and more power efficient, the designer needs to concentrate more on reducing power consumption, using secondary power sources and introducing power storage devices. Multiple power source availability and a power storage device on the board will make the applications much more useful and efficient in everyday use. This thesis proposes a power supply unit (PSU) for wireless sensor platforms which is capable of supplying a sensor node with energy from multiple sources, as well as status information from the PSU. Present power storage devices, like electric double-layer capacitors (EDLCs) and batteries, have become more and more common as their characteristics have developed.

We are getting smarter. Our knowledge of the world around us is increasing rapidly and our population spend a big portion of their time in school studying it. But art and craft are moving out to give room for more theoretical subjects. Today many of us can not even fix a torn shirt without help. We buy new ones, they are cheap enough.

This thesis is the result of the investigation and solution of a mechanicalproblem regarding flywheel malfunctions. A flywheel is, in short, a devicethat relies on a rotating object?s moment of inertia to store energy overshort time spans. This project is part of the development of a fourthflywheel prototype at the division for electricity at Uppsala university,which uses magnetic levitation to keep a hollow cylinder rotating at veryhigh speeds inside a vacuum chamber. Should the magnets fail however, orsome other error occur that leads to an uncontrolled state of rotation, thecylinder needs to be stabilized mechanically by a device usually referredto as ?back-up bearing?.

The aim of this study was to describe and analyse the perceptions that ten 12-15 yearold pupils with special educational need, who had been assigned a personal computer, have about Information and Communication Technology (ICT) in the learning process. Data was collected by personal interviews and observations. Sociocultural perspective and phenomenographic research approach were used as theoretical and methodological frameworks in analyzing and understanding the result. The major conclusions were that most respondents perceived the computer as beneficial assistive technology for learning, but some felt singled out by having a computer to assist in learning. Students had various opportunities to succeed in using their tool depending on e.g.

Denna uppsats tar upp frågan om en teknisk artefakt, i detta fall läs- och/eller surfplatta, kan ses som en bra lösning för dyslektiker i deras svårigheter med läsningen. Studien har fokus på läs- och surfplattans funktioner som kan vara en möjlighet att hjälpa personer med läsning. Uppsatsens experiment beprövar en redan etablerad metod, läsa och lyssna samtidigt, genom att sätta samman ett antal funktioner och tekniker som finns idag i en enhet. Vi har undersökt om man kan öka läshastigheten och läsförståelsen hos dyslektiker med hjälp av sådan teknik på en läs/surfplatta. Resultatet visar en trend på att metoden fungerar.

The exclusion of visually impaired from the information flow presented to us through signs was what led me into this project. With a growing amount of information being presented to us on signs and digital information surface the need of communicating this information in a way that could be read by visually impaired is evident. Looking into different ways of communication, my goal was to create something that filled the need of the visually impaired without branding them as disabled. Having a close relative with bad eyesight is became evident on how much it limited her in her everyday life, not being able to navigate herself without the support of her husband. Through interviews with her and others with varying diagnoses I reached an insight in their situation. To my surprise they still favored a visual form of communication before an auditory or tactile form, because it?s easy to survey and quick to interpret.

Syftet med studien var att beskriva arbetsterapeuters erfarenheter av hjälpmedelsuppföljning. För att besvara syftet valdes en kvalitativ metod för datainsamling och analys. Tolv verksamma arbetsterapeuter ingick i studien. Inklussions- kriterierna var att arbetsterapeuter som deltog skulle vara verksamma legitimerade arbetsterapeuter, förskriva hjälpmedel och ha yrkesarbetat under minst ett år. Data samlades in genom semistrukturerade intervjuer och en intervjuguide användes som stöd vid intervjuerna.

As requested by the company Husqvarna AB, we have developed a prototype of an electrical start device to a chainsaw. This was done through the development of new details in Catia, which has been integrated with existing details. Electrical components have been purchased by HAB electronics. In parallel with the modeling calculations was done, which was the basis for determine dimensions and the choice of an electric motor and gears. Prototype 1 improved gradually and led to prototype number 2, which became the final result.

The exclusion of visually impaired from the information flow presented to us through signs was what led me into this project. With a growing amount of information being presented to us on signs and digital information surface the need of communicating this information in a way that could be read by visually impaired is evident. Looking into different ways of communication, my goal was to create something that filled the need of the visually impaired without branding them as disabled. Having a close relative with bad eyesight is became evident on how much it limited her in her everyday life, not being able to navigate herself without the support of her husband. Through interviews with her and others with varying diagnoses I reached an insight in their situation. To my surprise they still favored a visual form of communication before an auditory or tactile form, because it?s easy to survey and quick to interpret.

The goal of this project was to together with Cochlear Bone Anchored Solutions AB develop a new cleaning tool for their Baha?systems. Cochlear BAS AB is a daughter company to Cochlear Limited based in Sydney, Australia. Cochlear BAS AB is situated in Gothenburg and with its 150 employees develop and manufacture the Baha?system.

Introduction In order to foster innovation of medical devices within the healthcare sector, a collaboration project, PUSH, has been initiated including the hospitals managed by the Stockholm County Council. The collaboration aims to capture ideas from employees and turn them into so called ?high-practice? products as well as facilitate the possibilities for medical device companies to try out their products in the settings of healthcare. Collaborations for innovation, comparable to the PUSH project, can be found in both Swedish and foreign regions, but some of them fail to survive due to obstacles affecting the progress of each collaboration. Avoiding the same destiny will be a challenge to the PUSH project.Purpose The purpose is to search for factors affecting organizational collaboration concerning innovation systems for medical device development.

This rapport aims to examine the difficulties in presenting a complex game in a way that will invite new players by making the game more accessible. We discuss and present our process on how to create an application named ?Digi?-war that is easy and fast to, both, learn and use. Our solution to this issue includes RFID-tags and readers together with four buttons, as input devices. This simple input device, placed in a gun-type control unit, aims to provide an intuitive interaction..

Antalet personer med rörelsehinder förväntas öka i takt med att allt fler människor lever längre med sin funktionsnedsättning. För att öka självständigheten hos de rörelsehindrade måste nya innovativa hjälpmedel tas fram och redan befintliga hjälpmedel vidareutvecklas.Idén till projektet uppkom då en av projektdeltagarna under en längre tid har sett sin rullstolsburna familjemedlem hitta på egna lösningar vid matlagning på spisen i ett ickehandikappanpassat kök. Huvudsyftet med projektet har därför varit att lösa de problem som rullstolsanvändare kan ha vid matlagning på spisen, till exempel att de inte når eller ser. Målet har varit att ta fram en fungerande prototyp för att kunna utföra användartester. Det här för att säkerställa förbättrad ergonomi och möjlighet till ökad självständighet hosrullstolsanvändaren.Projektet resulterade i en användarvänlig fungerande prototyp.

Researchers today anticipate that in the near future, the majority of the owners of a smartphone will use it as a wallet, i.e. for contactless payment. The technology that enables contactless payment today is ?Near Field Communication? (NFC), which is increasingly embedded in smartphones. Applications like mobile payment between a phone and a terminal use NFC.

Syftet med denna uppsats är att få en insikt i hur informationssäkerhetsarbetet påverkas av Bring Your Own Device (BYOD) i kombination med cloud computing. Författarna har kommit fram till sin slutsats genom att utföra intervjuer på två olika verksamheter samt en enkätundersökning som sedan har analyserats med aktuell teori. Utifrån detta har en kravspecifikation tagits fram som ett vägledande bidrag för organisationer..