Sök:

Sökresultat:

252 Uppsatser om Assistive device - Sida 1 av 17

Implementeringsutvärdering av Beslutsstöd i tre kommuner

In recent years, several problems in the field of Assistive device have been lifted. To manage the development Beslutsstöd (Decision support) has emerged as a systematic working method. Beslutsstöd is designed as a guideline and serves as a tool for physical therapists and occupational therapists in the prescription process of Assistive devices. Beslutsstöd thereby aims to improve the quality and effectiveness of the prescribing process of Assistive device in the organization of the municipalities. An implementation evaluation about how the implementation of Beslutsstöd in the municipalities did proceed has not been done.

Läs- och skrivsvårigheter och alternativa verktyg i skolvardagen

The purpose of this study was to investigate how two students at intermediate level in reading and writing disabilities and two special education teachers perceive the use of assistive tools in school. The questions used to answer the purpose was how assistive tools are used based on students´ perceptions, the purposes for which assistive tools are used based on special education teachers´ perceptions, what opportunities and/or barriers pupils and special education teachers experiences with assistive tools and how it works when assistive tools are implemented based on students´ and special education teachers´ perceptions. Data were collected by interviews. The results show that the assistive tools are mainly used for writing assignments and to ?read-with-ears?, primarily to facilitate the learning process in the classroom.

Att öka livskvalitet genom mobile assistive technologies. En studie om hur rehabilitering- och habiliteringsverksamheter bör förhålla sig till mobile assistive technologies i syfte att öka livskvalitet för personer med nedsatt synförmåga

As the use of smartphones and other mobile technology in our society is constantly increasing,so too does the possibilities of visually impaired persons increase as they are becoming moreable to enhance their quality of life with the help of mobile assistive technology. The purposeof this study was to explore how rehabilitation and habilitation organizations, which areworking with the visually impaired, should approach new technology. We have researched thisby examining the possibilities, opportunities and barriers of using mobile assistive technology.Based on this, we formulated the following research question: What factors are important forrehabilitation and habilitation organizations to consider in order to support, promote andcreate quality of life through the use of mobile assistive technology in their work with thevisually impaired? To answer the above question an exploratory study was made at an eyeclinic in the Västra Götaland region. The study was done through a series of qualitativeinterviews with both staff and patients at the eye clinic.

Verifieringsplattform i SystemVerilog

Our task was to create a virtual test bench for verifying memory addresses in our commissioning body?s models. The purpose with the testbench was that it should be created in such a way that it would be easy to change the device under test without any major changes in the testbench.To solve the problem that the testbench had to be able to verify different devices we had to create a general enviroment for how the testbench had to be composed. By doing an analysis of which com-ponents that are usually included in a testbench and which components that were necessary in our project we came up with a generall enviroment for the testbench. Our result was a testbench with the follwing basic functions:* Read from a file that contains read and write operations to the Device Under Test (DUT).* Apply the stimulus to the device* Read the results from the device* Compare the results with wanted values* Generate a log file which contains information about the simulation result..

Pekplattan leksak eller didaktiskt verktyg?

The information technique is developing at a fast pace and almost all new technique is being welcomed with opened arms. The newest on the market is the tablet device, it´s a device used for surfing the web, sending email, watching movies and playing games. It is now also being used in some schools for educational purposes. My research goal has been to find out how the teachers feel about using the tablet device for educational purposes. I have conducted interviews to find the answers to my questions.

Hörapparatbärares upplevelser och erfarenheter av tekniska hörhjälpmedel i offentliga lokaler

To be able to feel a sense of belonging, people need to have the possibility to take part of the information from the society. Hearing-impaired don?t have the same possibility as hearing people when they want to take part of the information, therefore they don?t get the same benefit. This contributes to a feeling of not belonging and a sense of limitation in different social occasions. Therefore the society needs to be accessible to everyone regardless disability.

Touching reality: Exploring how to immerse the user in a virtual reality using a touch device

This paper explores the field of virtual reality and how immersion and presences can be increased when it comes to navigation and interaction with Virtual Environments. The availability of VR technology has sparked a trend, especially in game development. Old ways of designing for interactive environments have to be revised. This is done by exploring the massive body of work done on VR, exploring its underlying concepts, using tested design techniques and ways of evaluating interaction for VR. A design suggestion in the form of utilizing a tablet device as the main input device is derived.

?Bring your own device? i svenska företag och organisationer

Most companies and organizations today depend on technology connected to the Internet. Schools and offices have therefore been providing computers, phones and other technology to the employees. The recent technological development and decline in prices for technology have contributed to making these products a part of everyday life for most people. This has made it very common for employees and students to bring their own devices into school and workplaces.The aim of this study is to define what "Bring your own device" means for Swedish companies and organizations and how it has been implemented in those. The aim is not mainly to generalize to all Swedish companies but create an understanding how the trend is used to provide a basis for continued research in this area.

Annonser och nyhetskonsumtion : En kvantitativ studie om hur unga vuxna irriteras av annonser på nyhetssidor på PC och iPad

In this paper we have studied how young adults read news on the internet. The purpose was to seehow the consumers of news were irritated by the adverts on news sites depending on whichplatform they used, a computer or an portable reading device of the brand Apple iPad. Observationsand surveys were conducted on ten people. The news sites we used for this study were www.SvD.seand www.expressen.se. The result show that a majority experienced that their news consumptionwere irritated by advertising, mostly on Expressen's news site because it wasn't perceived asforeseeable..

Förenklad felinformation på trafikinformationsutrustning

This thesis lays the foundation of the future routines of effective error repotring fortraffic devices in the raiway sector.If a device, for example a timetable display, stops working it is vital that the device isfixed as fast as possible so that the travelers dont miss any important information.The methods that are used today are old and not very effective. It can take time forthe repairmen to find the right device or locating the broken component. At the sametime he is supposed to maintain telephone contact with central control throughoutthe whole session.The need for a new, more effective, system is vital to make the whole repair pfocessmore effective and let the repairmen work without having to contact the centralcontrol by phone.I started this work by examining the possibilities of assigning every object with aunique identifier (ID tag) that could be accessed by a manual scan device. The ideawas that the ID tag could holw information about the object and be obtained byscanning the ID and get the information presented on a mobile device.The work also included building a internet application that enabled the reader to seeand change the information on the ID tag.The result was a database that stored information of different objects which could beobtained by scanning the ID tag and presented by a internet application..

Träningsredskap

There are many risk factors involved with a sedentary lifestyle. Deep vein thrombosis (blood clot), circulatory problems and contractures are just a selection of problems you can get by too little exercise. For people who are immobilized because of illness, it can be difficult to get enough exercise and movement to avoid similar complications. Because of most medical supplies on the market today are not optimal for use at home, I have chosen to develop a training device for the lower limbs, adapted for use in a bed, both in hospitals and at home. It is important that the devise can be used in any bed, regardless of headboards.

Alternativa verktyg, tillgänglighet och måluppfyllelse för elever i läs- och skrivsvårigheter : En fallstudie i årskurs 8 och 9

This study investigates how assistive technology tools are used in the classroom by students in reading and writing disabilities in the school years immediately prior to moving to gymnasium. Through observations and interviews with two students and two teachers this study also considers if the use of these tools can lead to increased accessibility and goal fulfilment, and whether these elements are prerequisites for success. The result shows that the students use laptops in the classroom, primarily for writing longer texts, and that in order to be successful, an early start, equipment, time and positive attitudes towards the tools are important. The students use the tools in the classroom, but they have very different feelings about how included they are in the class. The participants see a clear link between the use of assistive technology tools and increased goal fulfilment. .

Oljeavskiljare för biltvätt : Från idé till prototyp

This thesis describes the developmentof a device called "Oil Separator"which is used for washing vehicles andparticularly car washing. The devicedeveloped for Mr. Car Bilvård AB inUppsala, the company's work involvespassenger transport and courierservices. The company needs anexternal device that meets theenvironmental standards to wash theirown cars in the premises without theneed to modify or reconstruct on thepremises ground as the premises is ona leased contract.Work began with a preliminary study onthe literatures that describes boththe function and structure ofdesigning the device. A few interviewswith other car wash companies had beenimplemented, and some measurements.After collection of the necessaryinformation the specifications ofcustomer requirement was presented .With these requirements a fewconcepts was generated and weighedusing the Pugh matrix for conceptsselection for further development.The final concept was furtherdeveloped and a design has beenpresented.

Jämförande tidsstudie vid riskörning med kompakteringsskotare och traditionell ?lätt? modifierad skotare :

This report is a thesis work for a B.Sc. in Forestry exam at the School for Forest Engineers, SLU. The work was an assignment from Sydved Energy AB. The aim of the work was to compare the operational productivity between two kinds of forwarders for extraction of harvesting residues, one forwarder with a special compression device and one ordinary, slightly modified forwarder. Two sites were studied for each forwarder. The study shows that the annual production was about 11,000 m3 higher for the traditional forwarder. The cost for the traditional forwarder was SEK 0.9 lower per m3.

Analys och utveckling av inbyggda GPS-applikationer f¨or anv¨andning inom fordonsindustrin

This thesis is a part of the DySCAS (Dynamically Self-Configuring Automotive System)project which has the overall purpose of creating a middleware for the electronics in an automotive environment. The thesis has been made with collaboration with ENEA AB who is a member of the DySCAS project. ENEA AB has developed a demonstration platform to test the fundamental ideas which the DySCAS project is built on.The purpose of this thesis was to design and implement a GPS application to be added to the demonstration platform. This was done by adding a GPS receiver to the original DySCAS demonstration platform and designing and implementing an application to be able to extract the information from it. The resulting application is able to present cur- rent position and absolute time to the DySCAS networks as services to be used by other applications or by the network it self.

1 Nästa sida ->