Discharge of inadequately treated waste water containing nutrients such as phosphorus and nitrogen as well as organic matter and bacteria is associated with a risk of eutrophication and contamination. The Swedish government has decided upon several Environmental Quality Objectives aiming to reduce the emissions of nutrients to water bodies.In Sweden, there are between 675 000 to 1 000 000 on-site sewage systems. Recent studies have shown that the function of small sewage treatment plants is in many cases insufficient. To prevent this regular service and supervision by a professional is needed. The focus of this study are small sewage treatment plants which use a technique where mechanical, chemical and/or biological reduction of pollutants is being used in the same facility to reduce nutrients in household wastewater.The aim of the study is to investigate how different municipalities ensure that small sewage treatment plants fulfill the requirements and reduce pollutants as efficient as the manufacturers claim.

Membrane bioreactors (MBR) combined with biological phosphorous treatment (Bio-P) has been investigated if that could be an alternative to the future expansion with conventional active sludge treatment at Lundåkra wastewater treatment plant (WWTP) in the proximity of Landskrona, Sweden.The results showed that the surface demand in the biological treatment will be reduced with 67% with the MBR-alternative compared to a conventional activated sludge process. The nutrient removal in the MBR-solution was decreased or unchanged for nitrogen-, phosphorous- and organic parameters. However, the energy demand will increase with an estimated cost of approximately 1 million SEK annually. Moreover, the extra chemical consumption is estimated to cost 370 000 SEK annually.The disturbances caused by filamentous bacteria such as sludge dispersal could be resolved with MBR-technology because the membranes are not affected by these organisms. The Bio-P process combined with MBR-technology works if the wastewater recirculates from the membranes to an aerobic zone.In the proposal, there will be a new pre-treatment step, for instance hole screens.

This essay examines the criteria for a peaceful cemetery. First there is a short history of the Swedish funeral place. After that follows the definitions of a peaceful place according to environmental psychology. From these definitions an analysis method is constructed for identifying a peaceful cemetery. The analysis method contains six criteria, shape of the entrances, existence of sound, vegetation character, the cemetery?s demarcation, the cemetery?s management and what feeling the cemetery mediates.The analysis method is put into practice on three cemeteries, Överklinten cemetery, Stockholm forest cemetery and the old cemetery in Malmö.

The aim with this thesis was to investigate what characterises an English Arts and Crafts garden how they could be modernised in Sweden. My research was limited to 20 weeks of full-time writing and worth 30 ECTS. Through literature studies, interviews and site visits I could analyse my findings which resulted in a concrete garden design project. The Arts and Crafts was a movement that started in England during the 1880?s and evolved as a reaction towards the industrialisation. The influence came from the writings and practices of John Ruskin (1819-1900) and William Morris (1834-1896) who advocated the importance of craftsmanship. The Arts and Crafts movement also became a ?recipe for life? and was associated with a healthy and morally pure way of living.

Åmotfors Bruk AB (ÅBAB) has today an inefficient production of steam for the manufacturing of paper. Unpredictable energy prices and modernisation of the current equipment has been the underlying factors to invest in a thermal power plant, mainly driven by garbage. This facility will not only use the steam for paper production, it will also generate electricity through a steam turbine. Today, when a fault on the supplying line occurs which leads to disconnection of the external grid, all the support of electricity to Åmotfors Bruk (ÅB) will disappear. This will lead to major interruptions in the paper production, which will cause severe economical losses.

When stormwater occurs near human activity the water gets polluted. The purity and composition vary widely depending on the types of activities in the area, the type of surface the water comes in contact with, precipitation and many more parameters. It has long been known that stormwater quality can affect both human health and the environment as stormwater is a major contributor to pollution of receiving waters.A human activity that has an impact on the environment in several different ways is traffic and stormwater is no exception. Airborne gases that react with precipitation, oil leaks and fuel systems that drops down on the ground, metals from brake linings and rubber particles from tire wear are some of the aspects you have to take into account when categorizing the relationship between traffic and polluted stormwater.In this project, stormwater samples from a parking lot in Halmstad, Sweden were collected and analyzed with an atomic spectrophotometer. The presence and relationship between copper, cadmium and zinc with different rainfall parameters have been studied.

Water is a vital element and also enriches the experience of landscapes. It is naturally in constant movement and change but also exposed to the hands of man. In this paper two stretches of water is described through landscape and time in correlation between development and the experience of the watercourse Höje-å in the rural parts of southern Sweden. The intention is to investigate how Höje-å has changed over time and also how it is experienced in the surrounding landscape. With the help of literary studies the history of Höje-å have been described and through the course of field-studies the experience of two different areas along the watercourse.The biggest changes of Höje-å and its surrounding area have taken part during the last two centuries.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

Gunsta is situated about 10 km east of Uppsala. Today there are plans to establish 1000 new households in Gunsta before year 2030. The required energy for heating houses and water would be distributed via a district heating system, which also includes 200 existing residences. The annual required energy, according to this study, would be 16.2 GWh with a maximal peak effect of 6.9 MW. To meet this need, the study suggests a system with heat pumps to upgrade the 31?C water from a 1.8 kilometre deep borehole.

The purpose of the project has been to work out recommendations that reduce the energy-related costs and environmental impact of HPW Fresh & Dry Ltd., a fruit drying factory in Ghana. The factory produces electricity with diesel and biogas but also purchases electricity from the national electricity company. Heat for the drying process is produced from biogas, kerosene and solar panels. In the project the energy system was analyzed by measuring production and consumption of heat and electricity. The project results show that the factory can become self-sufficient on heat if the available energy is used more efficient. The production units for both electricity and heat have low efficiencies.

Today cultivation of cereal in Sweden has high costs for establishment in relation to the rest of the world, and if this cultivation will be able to continue, the farmers have to control their costs. It is important to see all costs, not the maximum harvest achieved, but the net result. All farmers have different conditions with respect to soil, direction of the farm and were the farm is located geographically. With the right knowledge and ambitions, we think most farmers could change to reduced tillage. In this paper we have tried to find out if reduced tillage is an alternative for farmers.

In Sweden, the County Administration board is responsible for improving the water quality in lakes and watercourses according to the European Union Water Framework Directive. In Västmanland county, where river Lillån is situated, the County Administration of Västmanland have the main responsibility for the aquatic environment in that area. The knowledge about the different watercourses in the chatchment of river Lillån is today limited. The aim with this study was to evaluate the ecological quality of River Lillån based on water chemistry analyses and benthic fauna investigations. The aim was also for the benthic fauna to compere different samplingsites and sampling methods with each other in order to see how the species composition changes in the river, and to see the advantages and disadvantages with different sampling tecniques.

Through previous studies during my education, I have experienced that chemical deicing road salt is a known problem, mainly in southern Sweden. Road salt causes damage to the environment and also damage to vehicles and structures such as bridges, etc. Road salt causes vehicles and steel constructions to rust, leading to increased costs for repairs of damage to structures. Road salt also causes damage to the plants and the economy to suffer, when plant material and soil needs to be replaced. In order to get closer to a solution, I put up three questions.

Landfill leachate contains a variety of contaminants and is created when rainwater percolates the landfill. For landfill management the leachate is the main issue that can cause problems to the environment. At the landfill of Fläskebo, Renova AB treats the leachate in a local treatment plant. The treatment consists of a chemical treatment step with chemical precipitation, flocculation, sedimentation and filtration, and a final step with a carbon and peat filter. Renova has to ensure that the condition of the leachate reaches the regulation set for the landfill before it is released to the recipient.

The purpose of this thesis has been to assess whether leaching from one particular Swedishlandfill site, Skörbytippen, is contributing to elevated levels of heavy metals in a ditch runningfrom the landfill site to the lake Mälaren in the communal region of Håbo kommun. Since theditch is stretching approximately five km downstream from the landfill site, in situ observationsand maps with known points of inflow was utilized to determine appropriate test points for thecollection of samples.Soil, water and sediment samples were collected and analyzed for content of organic material, pHand conductivity. Data on plant-available elements and total amounts of heavy metals wasacquired through ICP-analysis.The results show that the Skörby landfill is currently in the methane-forming anaerobedevelopment phase, which indicates that the concentration of free and complex-bound metals inthe leachate water should be low due to chemical binding with other landfill compounds. The pHof the sediment samples was generally one unit higher than the soil samples and some of themeasured data, such as pH and conductivity, show that an environmentally disturbing dischargeof some kind of strongly alkaline chemical(s) has been made from Benders? takpanneindustri inclose proximity to the landfill.