In this master thesis, the possibilities of customizing a low-cost microprocessor with the purpose of replacing an existing microprocessor solution are investigated. A brief survey of suitable processors is carried out wherein a replacement is chosen. The replacement processor is then analyzed and extended with accelerators in order to match set requirements.The result is a port of the processor Lattice Mico32 for the FPGA curcuit Xilinx Virtex-5 which replaces an earlier solution using Xilinx MicroBlaze. To reach the set requirements, accelerators for floating point arithmetics and FIR filtering have been developed. The toolchain for the processor has been modified to support the addition of accelerated floating point arithmetics.A final evaluation of the presented solution shows that it fulfills the set requirements and constitutes a functional replacement for the previous solution..

Emwiro Vibe is a complete system for seismic measurements. The functionality of the system was before the completion of this project handled using a software contruction based on a state machine. Emwitech, the company developing Emwiro Vibe, expressed a desire to replace this solution with a real-time operating system (RTOS). The project consisted of two parts. Firstly the existing software was studied, available RTOSes was evaluated, and the RTOS most suitable for the application was selected.

Emwiro Vibe is a complete system for seismic measurements. The functionality of the system was before the completion of this project handled using a software contruction based on a state machine. Emwitech, the company developing Emwiro Vibe, expressed a desire to replace this solution with a real-time operating system (RTOS). The project consisted of two parts. Firstly the existing software was studied, available RTOSes was evaluated, and the RTOS most suitable for the application was selected.

The Trappan Model is one of the most implemented treatment programs for children who have experienced domestic violence. This study undertakes a wider evaluation of the model through a pilot study. The approach is both quantitive and qualitative. Theory as well as the Strengths and Difficulties Questionnaire have been used to fulfil the aim. The design is pre-post.

This report evaluates whether normal approximation or resampling is to prefer for estimating the distribution of the sample mean and functions of the sample mean. The evaluation relies on simulation studies. The observations of the sample are allowed to be differently distributed. In the case of sample means they are also allowed to be dependent.For sample means the two approximations behaves very similar. The most important component whether we have a good or a bad approximation is how good the approximations catch the variance of the true distribution.

The purpose of this study is to illustrate how three schools work with special education needs, what they consider is special education needs and what measures they put in for the student to achieve the goals. I will also study how the evaluation and the follow-up of the individualized education program work at the schools.The empirical material consists of all active programs in grades 7, 8 and 9, together with and interviews with special education teachers and the principal at each school. The results are compared with similar previous researches and analysed by two dominant perspectives of school difficulties.The result shows that it is mainly the critical perspective that dominates the individualized education program. The student is the carrier of the problem and is excluded in many cases from the other students in the class. These measures are different compensatory accommodations for the student in order to catch up with other students..

For several years has there been a leading line from the government and the municipalities in Sweden to invest in schools and school grounds. The outdoor environment of schools has been rediscovered and given a greater importance. Investments have been made both practically with reconstruction and in a research context. Although, my work started with an assumption that these investments were mainly made at primary schools, and that secondary schools were set aside. The thesis This is my schoolyard.

An increased awareness about the global warming has created a demand for more information on how the climate is affected by different activities.This master thesis was initiated by Tricorona, a Swedish company that offers its customers analysis and calculation of their climate impact. Tricorona also supplies climate neutralisation with CERs, in accordance with the Kyoto protocol and controlled by the UN. This work demands updated emission factors for greenhouse gases. An emission factor gives information about the greenhouse gasintensity of a service or a product [kg CO2-eq./ functional unit].The purpose of this thesis is to examine how electricity, district heating, hotels, taxis, food and materials affect the climate and how emission factors for these areas can be calculated.This was done by reviewing and comparing different studies and by interviewing experts. The information was evaluated and recommendations on calculations and emission factors were made.The consumption of energy is the main source of greenhouse gas emissions for district heating, electricity, hotels, taxis and materials.

According to the current regulations described in IAS 27 - Consolidated and Separate Financial Statements, an investment company is required to consolidate all entities that it controls. However, this thesis outlines the creation of a new system, where those entities are instead measured at fair value, taking changes in fair value into account in the income statement. By recalculating the consolidated accounts for five major investment companies in accordance with the new system, this investigation concludes that the new system would provide investors with more relevant but less reliable accounting information. In addition, the historical financial performance of Investor, Industrivärden, Ratos, Kinnevik, and Lundbergföretagen, is evaluated using their recalculated consolidated financial statements. The evaluation indicates that the overall volatility in the companies' consolidated financial statements would have been higher during the time period 2005-2009, in comparison to official reports..

This thesis? objective is to evaluate the recently proposed Shy (2002) approach of estimating consumer switching costs. We apply Shy?s method for estimating switching costs on the Swedish markets for bank deposits and telecommunications. The evaluation has been achieved by comparing estimated results to economic theories, related empirical studies, and our expectations.

Students who regularly cause trouble in school, how can they learn anything? That is what we asked ourselves after having visited a special school for ?troublesome students? (in Swedish resursskola). Our main purpose has been to find out how these students have experienced the help they have been given in those schools.We have interviewed students, parents and a social worker in order to find out if the alternative pedagogical methods used by those schools give the students better opportunities to perform their schoolwork. The interviews have been made two or three years after the end of their studies in compulsory school (grade 9). We have used a qualitative method with semi structured interviews and also an evaluation model.

This text answers the questions how do we define what a campus is, how the concept of the campus came to exist and how it is used today, and how the Blekinge Institute of Technology (BTH) campus can be designed according to site conditions and the conclusions drawn from case studies at Chalmers University of Technology and Karlstad University. The purpose of the case studies is to gain insight into their campuses advantages and disadvantages. This finally results in an interpretation of how the Blekinge Institute of Technology campus can be planned. A campus is the area of land on which a college or university and its surrounding buildings resides on. Campus as a concept meant a field at first, it later evolved at American universities due to their design of college campuses.

This report evaluates whether normal approximation or resampling is to prefer for estimating the distribution of the sample mean and functions of the sample mean. The evaluation relies on simulation studies. The observations of the sample are allowed to be differently distributed. In the case of sample means they are also allowed to be dependent.For sample means the two approximations behaves very similar. The most important component whether we have a good or a bad approximation is how good the approximations catch the variance of the true distribution.

Purpose: To evaluate the management development course held at FöreningsSparbanken in Ronneby during 2000. The evaluation aims to map and describe what effects the course has had on the participants. We will assess to what degree the effects meets the objectives of the course set by the manager of the bank (future management recruitment, leadership, change catalyst, aligning the strive towards a shared organisational objective). Above mentioned also implies that the organisation should be influenced in some regards. Conclusion: Our conclusion is that all of the participants have as a result of the course increased their emotional intelligence in varying levels. We also conclude that the course participants? progress has not spread to the non-participants.

This master thesis covers the development of an automatic tuning process for the existing speed controller for drive systems. The drive systems are resonant two-mass systems where a motor is used to drive a load connected by a shaft. The developed method relies heavily on system identification and the construction of a complete mechanical model of the process. With this approach, the common problem with poor load speed control that derives from measuring only the motor speed can be addressed and solved for a majority of such processes.The automatic tuning method has along with general test functions been implemented in a complete tool for automatic tuning, testing and performance evaluation and reporting for drive systems..