The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

This report deals with an exam report written by Olle Hjalmarsson and Thomas Likar, students at Högskolan i Halmstad. The project was carried out for Haldex Traction AB in Landskrona whose business consist of manufacturing automatic all wheel drive systems (AWD-system). These systems consist of a plate clutch which activates all four wheels of a 4-wheel driven vehicle. An important component in these clutches is the accumulator which basically consists of a piston under the load of a spring which creates an oil pressure with the help of an electric motor used for actuating the clutch.At Haldex difficulties has been experienced regarding the assembly of the accumulator parts due to the small tolerances between the piston and the hole of the accumulator in the cast aluminium housing. Attempts have been made to assemble the parts in existing robot cells.

Sustainability reports are drawn up for the company's stakeholders and declare the company?s corporate social responsibility. Consumers are one of the companies' most important stakeholders for food companies. This study is aimed to describe how consumers perceive sustainability reporting in the food industry and if the application level of the GRI framework has an impact on how consumers perceive sustainability reports. Consumer perception is described in the GRI principles and the basis is the ICA and Coop's sustainability reports, which are two of Sweden's largest food company.

This report brings up the question - ?Is BIM profitable when planning a single-family home??.The methodology for finding the answer to this question is firstly to state the definitions of BIMand the company that is projecting by using the BIM-model. The answer is then obtained byanalyses of the factors of profitability with respect to: time, opportunity of revision, problemvisualization, preference adjustments and energy. A BIM-model has been made simultaneously asthe writing has proceeded to get a perception of how a BIM-model really matters for the analysis.The analysis shows that the answer for the question depends on further factors. The factors thatare mostly discussed are the company?s intentions and the complexity of the house.

This report describes the development of a system for controlling documents. The report starts with a problem description which the company wants an intranet-based solution for. The report then continues to describe the development phase for the different parts of the system which results in a complete system. The company that wanted this system is called Orbit One and is located in Ronneby, Sweden. They have had a problem with old documents circulating in different versions and in different binders. Now thanks to their new system they can access their documents easy and on demand through their intranet..

Background: The growth of the venture capital industry has given birth to new relations between investors and entrepreneurial firms. Venture capital firms are by definition investors serving as an active partner which implies a deeper relation between investors and entrepreneurs than has been the case previously. This new situation leads to a number of questions. Do venture capitalists really act as active partners with a long term interest in the venture? Do they add any value besides capital? How important is their influence in the portfolio company's decision making process? Purpose: The purpose of this study is to give a deeper understanding of the relation between venture capital firms and IT companies in the start-up phase.

In this paper, a small business network with around 30 users is analyzed with respect to security, performance and usability. Based on this analysis, two suggestions on how to solve the problems listed are given. The first suggestion focus on keeping a low budget, while the other tries to deal with the problems more thoroughly. One advantage of the first suggestion is, in addition to not straining the company's budget more than nessecary, it does not involve too great changes in the way the network is used and administered. On the other hand, the smaller budget leads to certain compromises, and there is a risk that similar problems occur again if, for example, the company would grow.

It is important that companies knows how to handle a complaint when they receive one from a customer. This information could the company take care of and use when they develop new services. Furthermore a good complain handling leads to satisfied and loyal customers which increases the revenue for the company. We have examined how SAS handle their internal information process and if this process affects the information and in that case how. The study is performed with a qualitative method, based on deep interviews.

Introduction: Bokföringsnämnden started the K-project in 2004. The purpose was to collect rules and standards for different categories of companies in a complete set of regulations. Small businesses were given the option to choose between K3 which is the main regulatory and K2 which is a simplified regulatory framework. One specific difference between the regulations is that companies may not capitalize development costs if the company applies K2, this may causes problems for the companies that can give rise to such costs.Purpose: The purpose is to explain the problems that companies have identified in the choice of regulatory frameworks and the implications that may follow the specific rule in K2 on the company's activities and financial report.Frame of reference: K3 contains definitions and requirements that must be met so development costs can be capitalized in a company. Information presented in the financial statements should be relevant to the reader.

These days most companies conduct some form of work for the external environment, quality and safety. In connection with this work, some companies have chosen to get management systems certified by any applicable standard for one or more of the fields while other companies have chosen other ways that are not associated with certification.In light of the fact that the individual systems are becoming unmanageable an increasing number of these companies are faced with the decision whether to integrate and coordinate these different systems or not. In order to study the possibilities of a company?s system coordination an assessment of elements particularly interesting for the company was performed. The key elements and focuses in the evaluation were staff access to information, experiences from other companies and environmental work status for some of the organization's companies.

The PhonePages of Sweden is a company that develops software for mobile units, especially cell phones. This thesis treats the development of, and contingencies for, a mobile phone directory, using the limited resources found in a mobile unit. The project was implemented and executed at The PhonePages with the intention of creating a product to sell to a third party.By studying different solutions, their benefits and drawbacks, an abstract picture of the product was constructed. Problems covered include compatibility problems caused by todays platform diversity as well as problems with saving, organizing and presenting data.The main goal was to create a phone directory which does not make external information retrievals. The service should contain both company and personal information, with name and phonenumber.

The purpose of this study was to make a survey of a larger company in Sweden to analyze if it complied to the stipulated Systematic Work Environment Management rules in Sweden. The company chosen was Hennes & Mauritz. The key question was to see if the company was examining and judging the risks, developing handling plans and if they were making yearly follow ups so that problems could be attended to. Further, I also wanted to examine if there was lack of competence within different departments as well as give some substantiate proposals on educations in Systematic Work Environment Management. The method used to investigate this was interviews and observations on how the Systematic Work Environment Management was handled in the company.

Today Internet is clogged up and packed with homepages and information from both private persons and commercial companies. This has led to a decreased availability for a company to be noticed. The most common tool for consumers to use while searching for products online is via search engines. But because of the nature of these, not all companies can have good placements. Our research question was, "How do small online-companies attract consumers to their website"? The purpose of this thesis is to identify how a company works through online-communications and how to attract consumers to their home page.

Aqeri has since the past year a new profile with name and logotype, which has createda need for an updated visual product identity. The company is a leading developer,producer and distributer of IT products suitable for extreme environments in industry,defense and vehicles. This new profile with the different segments has together with aproduct identity from two companies resulted in that they have no clear designidentity on their products. From this background the aim of this research is todetermine how a development of a design identity is done to implement it to Aqeri.The design identity can be defined as a product?s identity visualized through its formor appearance which defines what the product is.

This project has been about making a design suggestion for a boat accessory that adjuststhe distance between a sail-or motorboat and the dinghy, which is connected by a rope inthe stern. Today this is all done by hand and can lead to problems when it comes tostressful situations such as harbors and narrow passages.A company called Sailsafe came up with the idea and the construction, which they alsohave tested. I found them through an acquaintance at Dacat AB where I did an internshipin the fall of 2010.Using sketching as the primary tool I?ve worked in an almost-real design project with theaim to develop my skills and give the company a relevant design suggestion. Dacat thenhelped me with a 3d model in Alias, which was printed in 3d and painted in thepaintworkshop at school..