This report describes the development process of a pipe clamp used on exhaust system for cars. It is made based on the manufacturers desire to improve and make the clamp easier to manufacture and to reduce its price to their customers. This should be done either by manufacturing the clamp in one piece without an expensive and work intensive welding process, or by generating ideas of how to develop a brand new type of clamp. Investigating the market for similar products was done to eliminate intrusion of other manufacturers? patents but also to generate ideas.

Establishment can be described in many terms. This term is about a company that is establishing on the European market. For many companies, this can appear as a difficult, time- and resource taking process but to advance and develop it is not enough to have a good position on the Swedish market. The company Akzo Nobel Nippon Paint AB, which this composition is about, has taken the risk to leave the home country and explore the unknown. The process was careful and long-termed but also profitable.

AbstractResource efficient manufacturing is a term that has been increasingly applied within manufacturing, where one of the key points is to reduce waste of such forms that do not add value for the end customer. By the Lean principles, there are seven plus one types of waste, in which the definition of the eighth point varies among sources. In this study, the eighth type of waste has been interpreted as the untapped creativity and competence among employees that has not been put to use. From this, our question was incubated; How can you make the most of the employees? untapped creativity and potential within manufacturing? The case study will be developed with empirical data obtained from Dometic Group by conducting interviews.From the gathered literature, it was concluded that the communication between employees contributed to an increased understanding of one another as well as it allowed for improvement in work.

The purpose of this thesis was to describe how service producing IT- companies handles their internal marketing. We wanted to understand how management deal with internal marketing activities and how different companies create a working environment to encourage employees to motivation and well-being. To be able to find out we did a case study on a service producing IT-company. Two personal interviews were done with two of the managers. Our empirical research showed that the company used internal marketing on a daily basis.

Problem:How should a smaller investor behave when investing in the stock market and what knowledge should he have about the business he´s investing in? Purpose:The purpose of this thesis is to give the smaller investor a tool for investing in the stock market. The thesis aim to illustrate, through key ratios, what companies an investor should look for when investing in a company. Method:By studying already existing theories and then apply them on the thesis. The theories was then developed and refined to evolve to the finished thesis.

This report is written for a consultant networking company with the purpose to review the development ofthe company's remote connections from a user friendly and security perspective.This includes an investigation of the possibilities to consolidate existing authentication methods foraccessing customers. The problem lies in the amount of methods being used. Through case study wefound that smart cards, SMS-service, software and hardware tokens exist.The only method feasible from a security perspective is smart cards. Since the method is not commonlyused by the company's customers a standardization of it would be counterproductive.Also, the purpose of this report is to investigate how the ongoing internal development of the remoteconnection will affect the company's clients. Within this framework we have also verified a designsuggestion.We interpret, after the completion of the case study, that the internal development of the remoteconnection is marginally affected by legal perspectives.

Leverage buyout?s is an opportunity for companies, who can strengthen its market position by expanding its operations, and it add?s value to the company. At every LBO, copmanies make different values of the target company to finally come upp to a final bid. The final bid may in many cases be made of a surplus value, which is the differens between the value of the net-assets and the final bid. This we call goodwill and it has been a target in many discussions.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

When a crisis hits a company, it is very important that the company communicate with its customers. Communication is important for a company in crisis because this is a way for the company to tell their side of the story and thereby try to get the customers to see things their way. Because mass media reaches a lot of people, it is a simple and fast way for companies in crisis to get their message out to the world. Mass media can be very useful for a company, but it can also be a problem. Mass media and companies in crisis may or may not have the same purpose with the communication.

This dissertation discusses the preparations companies do when their auditor is about to visit them. We wanted to investigate if companies do some form of preparations with the intense of trying to influence the auditor in an, for the company, advantageous way. The purpose was to be fulfilled through the deductive process of theorization and from the gathering of empirical and the analysis of this data. We decided that a multiple case study would be the best approach for us, as we wanted to undertake a greater number of interviews than is normally done in a case study. The result from our study showed that auditors think that information from a company is more reliable, if its documentation is neatly kept, or if the relationship between the auditor and the company is good.

This thesis emphasizes the importance of understanding the employees? attitude and motivation towards their workplace at a company that works in the advertising business. An example company; thcommunication agency PS Communication in Stockholm, was used for the empirical part to investigate the purpose. The topic is interesting since the company works in a fast changing environment with new techniques,tools and professionals and the company is also going through an expansion that include many new recruitments.The purpose in this thesis is as follows: ?the purpose of this study is to elucidate the fate of attitude and motivation of employees in relation to the workplace during business expansion, if performance is reduced and competition increases.?The analysis and results shows that attitudes andmotivation among the employees in the workplace has deteriorated, the employees agree that it is due to expansion the company is undergoing.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

Background and discussion of the problem: In the staffing company business a unique situation exists because of the three part relation between the staffing company, the users of the staffing companies? services, and the consultants employed by the staffing company. To over bridge the conflicting objectives of the staffing company and the consultant incentive systems are designed. Research question: What effects on the consultants? effort direction do the staffing managers expect of the formal or informal incentive system? Method: The authors have found that a suitable method for the thesis is a survey study.

Corporate Social Responsibility (CSR) is about facing responsibilities towards a company?s employees, customers, stakeholders, suppliers and the environment. As customers and consumers came to seek companies that were dealing with CSR a rapid wave of ?forced? implementations of social responsibility began. Fair Travel Tanzania, which has CSR as the foundation of the company, says that they are transparent about what they do and how they give back to the locals, could it be a problem with this? And how do they actually give back to the locals? Is it possible to measure the impact of CSR activities within the company? And if so, how?.

Using the models from van Maanen and Schein (1977) and Dutton et al. (1994), we have been able to investigate the socialization process and organizational identification both from the organizational as well as the individual?s perspective. The link between these two perspectives establishes a better insight into the company?s actual socialization intentions and the individual?s identification with the firm.