When managing the quality of a service producing industry?s products, the industry faces greater challenges than the manufacturing industries do. Today?s globalization puts further pressure on service producing companies around the world to work at their absolute maximum. So, how do service producing companies work to manage quality? In this essay the writers take a deeper look at the travel agency Ving, part of My Travel Northern Europe.

With increased globalization more companies are sending their employees abroad in order for the company?s survival on the market. Many studies in the field of International Business describe unsuccessful foreign assignments and the importance of intercultural support regarding expatriation. Due to the fact that company X is an international organization we found an interest in studying how the company handles their expatriation process in Sweden. This became the purpose of our study.

This Bachelor of Science thesis was carried out at Metso Panelboard AB, located in Sundsvall, Sweden. The work lasted for 10 weeks and began at the end of February 2007. Metso Panelboard is one of the leading suppliers of complete lines, single machines, engineering knowledge and after-market services to the fibreboard industries. The task involved building a 3D-model of a dryer cyclone in the CAD-program Pro/ENGINEER. A dryer cyclone is the part where the tree fibres are dried in the process of manufacturing fibreboards. Currently, it takes about two weeks to draw a dryer cyclone. By creating a 3D-model of it, which should have the functionality to be generated to different sizes, the goal is to decrease the drawing time to about 20 hours and to increase the quality of the work. This report includes the fundamental theories behind the manufacturing of fibreboards with focus on the dryer cyclone.

Partner in a close company is taxed under special rules for private companies. This is to avoid a fiscal revenue conversion. Partner as having a major influence in the company and take out what is really earned income as dividends and thus be taxed at a significantly lower rate. The purpose of the close company rules is that a partner in labor income is taxed in the same way that an employee?s income.The problem that arises when one partner in a closely held company leave a shareholders contribution to the company which aims to raise the threshold for the shares discussed in this paper.

We were commissioned by Bulten Stainless AB to identify and analyze their customer order flow. Because the company had problems with delays in the production and deliveries to the customer, the task also included investigation of how the company work with prevention and management of delays. The purpose of the project also included to identify critical factors for effective order flow in smaller workshop companies.The information about the flow and how the work takes place within the company were collected through observations on the company and interviews with the staff. This information was used to draw maps over the customer order flow and to write a description of the current situation within the company. Both strengths and weaknesses of the companies work could be identified through analysis of the present situation.

Almost every company sooner or later ends up in a more or less difficult economical situation. The reason for the economical crisis varies for each individual case but common for them all is that it is the management group that has failed in their work to guide the organisation to avoid a negative result. The next common denominator is that it is the management group that has to handle the changes in the company's environment and lead the company out of the crisis. But how can they do this and take decisions in a rational and effective way and is there warnings signals that the management group missed before the crisis was a fact? This is some of the questions that this study is going to discuss and analyze. The aim of the study is from a management perspective chart the strategic work of the company's management work when handling an economical crisis.

Thesis completed by Johan Arvidsson, Alex Rasooli and Pontus Winroth, students at master program Product development and Design at the School of Engineering in Jönköping Sweden. The project comprises 30 ECTS credits and was carried out during the semester in the autumn of 2007.It was carried out in cooperation with Eksjöverken AB, subcontractor within the truck industry with special knowledge within the area of complicated machinery construction work. Job initiators at Eksjöverken were Mats Svanberg and Kjell Nygard. Dag Holmgren was acting as a tutor from the university. The task was to develop tools for trucks, primary toolboxes but in case of time also under run protection.

The study has shown that retailers in the mid-price segment differentiate their brand through developing a strong company identity around the brand. The personality involves store atmosphere, merchandise and advertising. Larger companies have chosen to lay the responsibility on management level, which facilitates on store level. By controlling the strategies on a central level the company can make sure that the stores are steered in the direction that the company wants them to be steered in, and also that they follow the positioning-concept. The company can also devote its efforts to working with its core value, which is service.

By using industrialized building, pre-installed modules can be delivered to the construction site where they are easily mounted. This method has many advantages compared to on-site manufacturing, for example, the precision during the production process should be much higher than building each wall and floor on site. Furthermore, the quick erection procedure when using prefabricated elements and the possibility to use weather protection has the advantage of not being dependent on weather conditions, and many other factors.Masonite Beams AB is a Swedish company (a member of the Norwegian company, Byggma ASA) with a relatively new technology using light weight beams as bearing elements in the walls and a certain stiff board lamella slap which is mounted on the top of the floor structure creating an integrated stiff beam / board floor structure. The elements are flat which make it much easier to transport the elements from the factory to the building site where the building parts are easily mounted with special mounting stud.One of the main drawbacks of lightweight structure is the sound transmission. The main topic is low frequency annoyance, however the complex structural elements and their mutual sensitive connections other acoustical problems might appear.

The purpose with this work was to investigate some alternatives for an effective handling with grain, to find the most economic alternative. It is not common that moisture content is below 14% when harvesting grain in Sweden. To store the grain safe it has to be preserved in some way. I have described some of the most common systems for preserving grain in this paper. I have used the systems as a basis when I made calculations in handling the grain for a company. I have chosen a company placed in south of Sweden. The productions are crop farming and pork.

This thesis describes how a cost reduction project was done on the Packsize ondemand packing machine EM7. The cost reduction was achieved by making minorredesigns of the EM7.The project began by studying the EM7´s structure and function by working on itsassembly line. A short literature study on the subject Design for Manufacturing wasalso done.By working on the assembly line and by speaking with staff from production anddevelopment departments, a number of ideas for reducing manufacturing costs arose.Estimations of the potential cost reduction size for each proposal were done incollaboration with vendors and the purchasing department. Based on the size of the cost reduction, technical risk, impact on the assembly lineand the development time the various proposals were ranked. The two highestranked proposals were selected for further development towards finished solutions.One of the ideas that were selected to develop in to a finished solution meant thatsome of the pneumatic valves were replaced with others.

This study has a focus on brand building and brand identity. The overall idea of the study is to examine the Swedish clothing company WeAretheSuperlativeConspiracys brand building tactics and activities. WeAretheSuperlativeConspiracys, or WeSC, is a company that produces and sells streetfashion in over 20 countries and has over 1600 distributors. The company has in the recent years grown to become one of the largest in its segment. The interesting factor in WeSC´s brand building activities is the use of Weactivists.

Today, an Intranet is an important way for a company to share information. An Intranet has become a company?s way to communicate within the organisation. This communication is important, especially when the company is going through changes. In order for a project to succeed, the employees must support it.

Our purpose is to report on a few of the internal and external factors that influence a person to choose and dare to start his own company, instead of being employed. We would also like to get an insight on what is of strong importance when you establish a new company. This will be done with a theoretical and empirical study..

The manufactory industry, due to decline in profit margins, is seeking new business opportunities by moving towards servitization and value-adding services in after-sales. We have therefore conducted a case study to investigate a manufacturing company in their current transformation towards servitization. By studying the management perspective, we aimed to understand how Information Technology, by adding value, could play a role in the transformation process. This study shows that information technology can take an integrating role, by supporting new value-adding services to provider and customer, as well as a co-creating role, where both provider and customer benefits by learning from each other, in the changing work process initiated by new services. The study has also shown that Information Technology, together with organization, information and people, are crucial components in the manufactory industry?s transformation towards servitization.  Furthermore, the study has also shown that the value chain has the potential to drastically change due to the value-adding that the information technology brings to the progress of servitization..