The main aim of this master thesis was to see the process of an interactive online reference service from idea to final product. The reference service we have studied is developed and used by the Library of the National Institute for Working Life in Stockholm, Sweden and goes by the name phibi. Our goal was to review the whole realization process from the reasons why a service like this was created, how the service was introduced and implemented inside the organisation and finally what the result and consequences were for both the library staff and for the users of the service. Phibi is designed to be a tool that fosters communication between the library staff and the remote users where the users get the opportunity to be helped with their questions by the library staff although they are not physically present in the library. To understand the process we conducted a case study with 11 interviews of the library staff, the superior and the initiator to phibi.

There have been, in some rare cases, difficulties with clamping of inserts with U-holesin their tool holder. According to the complaints, the inserts could not be properlyclamped or could fracture when clamped. A study has shown that variations inclamping behaviour are mainly depending by the position of the screw hole in the toolholder and the centering of the screw hole in the insert.The focus of this project has been the centering of screw hole in insert. It has beenshown that the screw holes are not always enough centered in the insert. Theproblem may occur after a certain step in the production, i.e.

Outdoor education is a teaching method which has several advantages to traditional classroom tuition. Its ideas have a long tradition and find support in the current Swedish curriculum. The place for the tuition is a central aspect within outdoor education. This essay aims to investigate what good places for outdoor education look like as well as discussing how the characteristics of such places can be used when designing schoolyards. Previous research shows that nature has characteristics that suit outdoor education well.

Twenty-four calves, which had not grazed previously, were divided into four groups. They were subsequently inoculated orally with either E. alabamensis oocysts, O.ostertagi/C. oncophora larvae, or both. One group remained uninfected and was used as a control.

This study examines the use of building modeling and energy simulations in the design process  of  a  building.  The  take-off  point  is  the  notion  of  energy  simulations  being needed early and throughout the building design process, and that the lack of energy simulations may be explained by the fact that they are time consuming and therefore often too expensive. A greater interoperability between software tools used by relevant disciplines,  such  as  the  architect  and  the  energy  specialist,  would  create  smoother workflows, which would reduce this cost and open up for more frequent and iterative energy  simulation  processes.  The  study  is  an  assessment  of  the  modeling  tool  Revit and  the  simulation  tool  Virtual  Environment  and  whether  they  can  create  smoother workflows, and make leeway for a more frequent use of energy simulations throughout the  design  process.  It  also  investigates  the  limitations  of  what  can  be  examined  by simulations in Virtual Environment. This will hopefully help clarify the future role of energy  simulations  in  design  processes.  The  method  is  a  trial  by  error  approach  of testing the two software tools by building and simulating a model. The results of these tests  show  that  the  workflow  is  not  optimal  (and  therefore  time  consuming)  for frequent  and  iterative simulations  throughout the  design  process,  but  it  also  reveals some  great  possibilities  of  what  can  be  performed  with  these  two  powerful  tools  at hand.  Further  development  with  regards  on  platform  independency  of  the  building information  model,  including  seamless  exporting  and  importing,  seems  necessary  to strengthen the future role of energy simulations..

Since the 1990?s the Swedish school system has undergone major and recurring structural reforms. Two of the most comprehensive changes has been the shift of primary schools as an integral part of the welfare state to the responsibility of the municipalities as well as the introduction of free school choice for the students. Through two months of participant observations and semi-structured interviews this thesis seeks to answer the question of how these reforms has come to effect the work of teachers in a medium sized public school in a small municipality in the outskirts of Stockholm. Earlier research has shown that public schools in socio-economically vulnerable areas are disadvantaged due to the reformation of the school system (Beach & Sernhede, 2011; Östh, Andersson, & Malmberg, 2013).

The main aim of this master thesis was to see the process of an interactive online reference service from idea to final product. The reference service we have studied is developed and used by the Library of the National Institute for Working Life in Stockholm, Sweden and goes by the name phibi. Our goal was to review the whole realization process from the reasons why a service like this was created, how the service was introduced and implemented inside the organisation and finally what the result and consequences were for both the library staff and for the users of the service. Phibi is designed to be a tool that fosters communication between the library staff and the remote users where the users get the opportunity to be helped with their questions by the library staff although they are not physically present in the library. To understand the process we conducted a case study with 11 interviews of the library staff, the superior and the initiator to phibi.

The aim of this master thesis is to study the reliefs of a Romanesque tombstone from 1130 AD, with the intention to form a plausible understanding of their meaning. During the course of the investigation, my main focus will be on collecting materials of an iconographical and historiographical nature, as they appear in previous studies. I will also use performative analysis when examining the tombstone. Consequently this thesis can be seen as a survey of history and place; early Christian iconology as well as the experience of the viewer. As a result, the 900-year-old tombstone will not only be seen as a memorial in this text, but also as a performance of one man?s faith and as representing the core message of the early Christian church.The tombstone is a rarity in Swedish art history and well worth a closer examination.

This thesis work includes studies and simulation how magnetization of the translator in a linear generator for wave power can be automated. The translator is the moving component in the generator that is "dressed" with permanent magnets. The translator is magnetized with rectangle-shaped permanent magnets that are today's strongest permanent magnet type of neodymium-iron-boron (NdFeB).Eight equivalent metal sheets are mounted around the translator. The plates have milled tracks where 106 permanent magnets per sheet are mounted. Today the assembling of the magnets is done by hand, which is a very tedious and time-consuming work.  This project presents investigations about the automation of the translator magnetization theoretically and simulation results are preformed in ABB's robot simulation software RobotStudio. Even robot-held tool was designed that enables the robot to be able to magnetize the translator in a simple manner.  The investment cost is roughly 1.5 million SEK. With an economic life-time of five years, the investment costs are estimated to 24000 SEK / month.  According to the calculations, this project is very motivated to implement, as it provides savings up to 17 000 SEK per translator which is 10.2 million SEK assuming that the robot cell is operating at full speed the whole year.According to this thesis work the result is a 4x9 meter cell with two industrial robots of the type ABB IRB6650S.The cycle time to magnetize one translator was calculated to about 10 hours.This prototype of project can possibly be implemented in a full-scale production line and performed according to the calculations and simulations presented in the report. Further work is suggested to improve the tool.Lyssna .

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

This report was made for the company HordaGruppen AB to investigate how information security was handled. This report fits in the Master program of Internet Technology at School of Engineering in Jönköping University in Sweden.The question at issue was how you protect your information against different threats. One question was how to make an information security policy and which guidelines you can follow in the Swedish Standard, SS-ISO/IEC 17799:2000.Another question was to investigate the information sources at the company and which threats there are against it.The work begins with a presentation about information security for the chief of information and the chief of quality in the company. The next thing was to do a survey of as thing are at present with a tool from Länsteknikcentrum called ?Infosäkpulsen?.

To create a profitable and competitive business an important factor today is a well-functioning logistics. Through effective internal material flows effective logistics can be achieved. Unnecessary handling and movement of materials is a waste which affects the internal material flow. These wastes should be identified and eliminated as much as possible to improve the internal materials handling and through that achieve a more efficient business. At Fagerhults Belysning AB, where professional lighting systems are developed, manufactured and marketed, a new inventory has been built and changes in the assembly has been made during the past year.

In public relations and marketing, lawsuits traditionally connote crisis. The purpose of this study is to explore the design and critical considerations concerning risks and opportunities when companies voluntarily initiate lawsuits with the partial aim to get publicity in the mass media. In the following paper, the communicative aspects of two such Swedish cases in the European Court of Justice are studied?a large corporation challenging the Swedish monopoly on gambling and a small company challenging the government on their restrictions for individuals to import alcoholic beverages. The case studies have been conducted through interviews, analysis of legal acts and press articles.

The purpose behind this work was to investigate whether I could from a practical approach to create desire for mathematics among students in primary schools. I wanted also to find out how students feel about their current mathematics teaching. By introducing an equation game, and interviewing students to find out their perception of their mathematics teaching, I was able to answer my questions. What I came to was that through a practical and laboratory work, I could create an enjoyable educational opportunity in mathematics. Then during the interviews I also learned that students had not a pre-determined negative attitude towards mathematics.

The following essay aims to determine what textbooks and teaching media educators in the county of Västerbotten use when teaching the relation between religion and science. Based on educational science theory and through analyzes of factual texts, the teaching materials was examined to determine how much focus they put on the thematic of religion and science. The result shows how the different teaching materials affect this thematic differently. The main conclusion is therefore that students in Sweden could, depending on the teaching materials used in their education, be taught by different standards to reach the same requirements..