In this thesis, the conditions of using the maintenance method live work at the Swedish TSO, Svenska Kraftnät has been analyzed. The study is limited to only include live work on 220 and 400 kV. The live work method is a type of maintenance that can be done, on lines or stations, even though they are still energized. The purpose of this thesis has been to map the present live work situation at these levels in Sweden. The study is based mostly on interviews with people who have specific field competence with in live work but also with personnel at Svenska Kraftnät.

Background: Associated with the change in the regulations in 2009 concerning how goodwill should be handled in the acquisitions, brand valuation is increasingly recognized. Goodwill will now be identified and the brand will therefore be separated to be individually evaluated. The valuation has a problem with a number of factors that will influence the choice of method, to obtain a reliable value Aim: The purpose of this study is to examine the method used for brand valuation associated with the acquisition situations. In addition, it aims to gain a better understanding of brand valuation and its problems.Method: The study has a qualitative basis, where three key people of brand valuation have been interviewed. These work as valuation specialists at various accounting firms, this to get answers that could be compared.

AbstractThe purpose of this study is to analyse the reading- and writing-approaches: the LTG-method and the whole language-theory. The attention is to perform a comparative literate-study to distinguish their similarities and differences, and examine which one of the approaches that is most clearly anchored in the syllabus of the subject Swedish. The starting-point of the study is the questions: Which similarities respectively differences have the LTG-method and the whole language-theory? Which one of these theories is most clearly anchored in the syllabus of the subject Swedish? The study has shown that both the whole language-theory and the LTG-method can anchor in the syllabus for Swedish. However the whole language-theory has stronger hold in the syllabus, as the whole language emphasises the meaning of literature for reading- and writing-learning, and considers the pupils reflection during their learning-process and conquered knowledge-goal.

The media society of today is changing. Because of a media convergence, traditional media distributers like television, radio and newspapers have to rethink their place and their purpose in the world. This paper brings a new angle to this area of research, conveying how creativity, workflow and media convergence is related to each other. A deeper understanding of these relationships gives us a clue about how media convergence can change the practice of TV- production. In this paper, a case study at Go?kväll in SVT is presented.

During spring 2012, six students at the Royal Institute of Technology in Stockholm carried out agroup project in the field of mechatronics as part of the thesis for the bachelor degree. The resultwas a robot with active balancing and the purpose of this report is to describe the development,manufacturing and problems that arose during the project. The finished robot has two wheelsmounted in line with each other, like a bicycle. Measurement data from an accelerometer and agyroscope are used together in a complementary filter for determining the angle from the verticalplane. For balancing, a PID controller was used to control the rotation of a reaction wheel, whenaccelerating causes a straightening torque.

Traditionally, rolling mills use emulsions based on a mixture of oil and water for lubrication. Since two years ago SAPA has been using (instead of oil) a synthetic lubricant so called conditional emulsion for hot-rolling of aluminum. This lubricant is water based and homogenous at ambient temperature, but switches to a two-phase system at heating above the cloud point.This project aims to validate and if necessary modify an existing HPLC method for quantifying two out of three key components (A, B and C) in the conditional emulsion. Attempts to develop a method to quantify the pH adjusting components, X and Y were also made. These two methods are required to optimize the lubricant.Due to the complexity of the components, it has been difficult to present a method for quantification, and HPLC with ELS detection was chosen after a long series of trials.

This essay aims to investigate a rare method of marking up timber before hewing it. The method for marking up timber is by eyesight, where visual judgment and the use of a broad axe are the tools employed. The broad axe is driven through the bark and exposes the inner bark in a straight line. The method is described by a craftsperson dating back to the 1930s. There is a lack of information regarding the method.

Subclinical mastitis (SCM) is a well-known problem in the dairy sector, where it causes severe economic losses mainly due to reduced milk production. This is a problem not only in the western world but also in developing countries. Surveys from different developing countries have shown a SCM prevalence of 52.4 ? 88.6 % at cow level and 26.7 ? 63.2 % at quarter-level. To combat mastitis is important to optimize the milk production of the cow.

A large cost at the construction sites today is the labour cost of the workers. But unfortunately the worker potential is not used to full. It is not unusual to take into a count with a work-­?place-­?additional-­?time of 50% in some cases. By increasing the workers' motivation and responsibility for their tasks may reduce the time considerably, which also increases the potential for greater gains in construction projects.By using the situational leadership may the workers level of maturity develop entirely.

Habitat mapping was conducted in the main stem of River Vindelälven in the autumn of 2009 along the salmon distribution area. The aim was to estimate the quantity of potential reproduction areas, including spawning and juvenile rearing habitats. The mapping included 61 km of various stream sections along the river length of 269 km. The total area of stream habitats was estimated to 647 ha of which 396 ha (61%) were considered as either potential or optimal juvenile nursery habitats. The area of these two habitat classes were used to estimate the smolt production in the river by using electro fishing densities of juveniles (0+ per 100 m2).

Mastitis, an inflammation of the udder mainly caused by a bacterial infection, induces an increase in the somatic cell count (SCC) in milk and is consequently one of several factors affecting SCC in milk. In this literature review it is investigated whether SCC; on udder quarter, cow composite or bulk tank milk level, can be used as a quality marker with focus on milk composition in terms of the content of fat, lactose, total protein, casein and whey protein. According to this literature review the relation between SCC and milk composition is not reliable either on udder quarter, cow composite or bulk tank milk level. SCC was related to lactose, casein and whey protein on udder quarter level; lactose and whey protein on cow composite level and lactose on bulk tank milk level.

This master theses deals with different methods for automatic tuning of the existing controller for external axis. Three methods for automatic tuning have been investigated. Two of these are based on the manuell method used today. The third method is based on optimal placement of the dominant poles. Different sensitivity functions are important for this method.

Sustainable Development is often described as a balance between ecological, economical and social aspects. Between these exists a complicated interaction that creates conflicts in the planning of the landscape. We see a growing need for a functional interaction between values and interest and an understanding for different perspectives. Cooperation and dialogue are key ideas with the focus on cooperation rather than the goal. There is a lack of forum for dialogue and cooperation within municipalities where a great knowledge and competence are gathered.

In the following study the author compares two methods of teaching history, the thematic approach and a more traditional chronological approach. Aiming at distinguishing the perceived notions of strength and weaknesses of each method, from the perspective of teaching, the author uses semi-structural interviews with four teachers in order to shed light on the reasons why each method is chosen. The perceptions of the thematical and chronological method in teaching history are further compared with the result in students? grades. The result shows that the thematic method is perceived as being better at teaching the student about causality and different understandings of changes in history, which would have positive impact on higher grades.

The aim of this final thesis is to make it easier for the customer of a new designed house to get a picture of what the house will look like inside before it has been built.A method, which can be applied by any construction company who likes to visualize there buildings, has been designed and tested. One works after a regular design planning which is transformed into a three dimensional model of the house. In a rendering program, materials and surfaces are chosen for the model and then a picture of the finished product is made. The programs used for this work are ADT 2006 and VIZ Render.To evaluate the use of this method I?ve chosen to cooperate with LB-Hus which is a housing company that is specialized in building detached houses.