Detta projekt handlar om att skapa en WiFi-accesspunkt på en dator där datatrafiktill och från applikationer på en smartphone kan avlyssnas. Första steget i projektetvar att skapa accesspunkten på en bärbar dator med Windows 7 operativsystemetoch att dokumentera tillvägagångssättet. Programmet Wireshark installerades sedanför att lyssna av internet trafiken mot en Android smartphone. Sista steget i projektetvar att mäta och tolka nätverkstrafik på ett antal populära "appar". En relativjämförelse gjordes mellan apparna med cache-minnet påslaget kontra avslaget..

The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.

This diploma work has been conducted for the consulting company Ramböll inUppsala, Sweden with the purpose to perform a study with the calculation programFEM Design 9.0 made by Strusoft. The aim has been to find out if it is possible to gainadvantage by utilizing more advanced 3D software for design calculations, instead ofthe traditional methods currently used in construction works.The method of approach has been to model an existing warehouse building with theprogram FEM Design, and then compare the results with those attained with FrameAnalysis and hand calculations. These results are then analyzed. An evaluation is maderegarding to what benefits can be achieved using a more advanced 3D-model.The results of the study show that the differences between the methods are not ofany significance with regard to the design of the steel frame. However in morecomplex materials such as reinforced concrete, the differences become more notable.The conclusions drawn by the authors of this study into FEM Design are that theeducation requirements of the program are higher than for simpler programs, whosepurpose are solving predetermined problems.

Denna rapport redovisar den process som utvecklingen av OTWs nya webbplats har inneburit. Jag har arbetet med att skapa en ny design av deras nuvarande webbplats där syftet har varit att skapa en webbplats där man presenterar sig själva på ett bra sätt och ställer mindre krav på redaktionellt innehåll samtidigt som man följer konventioner för branschen och målgruppen. I utvecklingen av webbplatsen anpassar jag mig efter rådande designprinciper och riktlinjer för användbarhet så att webbplatsen ska bli så lätt att använda som möjligt. Utvecklingen av prototypen har skett i mjukvaruprogrammet Axure RP. Resultatet av projektet är två interaktiva digitala prototyper i form av en mobil version samt en desktopversion.

For research purposes Saab has developed a generic mathematical model denoted VEGAS of an aircraft with a configuration similar to JAS 39 Gripen. Today parts of Gripen backup control system are used also for VEGAS making the system subject to both corporate and defense secrecy. The main objective of this master thesis is to design, verify and implement public pitch axis flight control system for VEGAS. Furthermore, simplifications regarding the design process is to be examined. Design of pitch axis flight control system for the entire flight envelope has been carried out.

Bakgrund: I konkurrens om morgondagens konsument kommer sannolikt materiella värden inte räcka till. Företag måste också kunna erbjuda immateriella värden genom upplevelser. Ett sätt att göra detta är via produktens design. Den företagsekonomiska relevansen understyrks ytterligare av det faktum att lite forskning finns kring immateriellt värdeskapande och design. Syfte: Syftet med uppsatsen är att bidra med förståelse för hur design kan tillföra immateriella värden till en produkt.

Marknaden av smarta mobila enheter blir sto?rre och sto?rre och det kan vara ett bra sa?tt att na? ut med sin tja?nst eller produkt till den breda massan genom att driftsa?tta en mobilapplikation. De applikationer som kan installeras pa? de mobila enheterna och som anva?nder sig av enhetsspecifika funktioner kallas native-applikationer och a?r bundna till en plattform. De kan da?rfo?r bara anva?ndas av de enheter som anva?nder sig av den plattformen.

The purpose of this study was to follow a research-oriented design process and to develop a design draft for a digital service that supports users to make more environmentally conscious choises in their everyday life. By following an interaction design process from start to final delivery, the study aims at creating a broad understanding of the process. Therefore, many userrelated activities were implemented in the study: eg. personas, scenarios, sketching and user testing. The project resulted in digital wireframes for an iPhone application using embedded GPS to identify and locate environmentally friendly businesses.

I dagsläget växer behovet av rätt information vid rätt plats, kontextbaserad information. Med hjälp av iBeacon kan man till en stor utsträckning förse det här behovet med en lösning. I uppsatsen undersöks användningsområden för iBeacon och idéer för hur man kan utveckla lösningar med hjälp av iBeacon. Ett koncept kommer att implementeras för att distribuera kontextbaserad information på mässor. Konceptet utvecklades till iOS och Android.

In inhalation anesthesia life-support systems are used to provide gases to the patient and to monitor important parameters. These systems are used in dynamic and stressful situations where the information-load on the operators often is significant. This thesis presents a design concept of an anesthetic system. The design goal has been to keep the information-load on the operator low with the objective to minimize confusion and error.A number of contextual inquiries were made in the operating room during surgery at four hospitals in Sweden. The goal was to understand the actual use-situations when anesthetic systems are employed.

Nowadays, packaging design is seen as a competitive tool and its importance for corporations is becoming increasingly apparent. The rivalry within homogeneous markets puts high demands on differentiation and the ability to create something more than the product itself. With this fundamental question, the soft drink industry has been examined and a case study of the brand Coca-Cola has been performed. The aim is to investigate how packaging design is used as a tool for strengthening a brand and to explore which additional values this contributes. In addition, the study observes the most important factors in the development of packaging design.A theoretical work of reference, consisting primarily of theories related to branding, design development and visual identity, has been developed to support the study.

This thesis project is based on a business idea where users can design their own t-shirt online. The project shows the first step in the development process where a prototype for a user interface is created and evaluated.The purpose of this thesis project is to answer the following question:How does one develop a user interface for t-shirt design with consideration to interaction design theories?In order to answer this question the design process began with scheduling the work at hand. The first step was to build a conceptual model based on specifications made prior to this project. This conceptual model became the foundation for the physical design.A high fidelity prototype was created using Macromedia Flash and Actionscript 2.0.

Uppsats för avläggande av högskoleexamen i Kulturvård, Trädgårdens hantverk och design 7,5 hp, 2014.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

The aim of this Master of Science Thesis is to develop guidelines and improvementsuggestions of RiNOVA Traffic AB?s dynamic speed bump. The project started with athorough pre study of the design and its function to find out how passing vehiclesaffects the dynamic speed bump. The majority part of the pre study was to createnecessary mathematical models to explain the arisen forces and strains.The results of the mathematical models gave necessary information about the designregarding weaknesses and flaws. The most critical ones where those which interferedwith the design?s performance and reliability, and therefore needed to be corrected.These problems where more thorough analysed and discussed with experts before thefinal guidelines and improvement suggestions where developed.The parts of the design that had to be redesigned were the extension springs and thebearing that enables the dynamic properties.