Opcon Powerbox is a product developed by Opcon together with the underlying company SRM (Svenska Rotor Maskiner) where surplus heat from the industry is used through an Organic Rankine Cycle (ORC)?process to produce electricity. An ORC-process is a thermodynamic circle process in which a refrigerant is used as the working fluid. The refrigerant makes it possible for the circle process to operate at lower temperatures than the conventional Rankine process.In this master?s thesis a data analysis software for the Opcon Powerbox has been developed in which measurement data is retrieved and handled from the Opcon Powerbox.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

The current study aimed to test the public self-consciousness impact on creative performance. An experimental design was used in which 40 participants were randomly assigned to two groups, one of which was the experimental group and the other was the control group. A mirror was used in the experimental group to induce public self-consciousness among the participants while they performed creativity tests. A consequence test was used where the participant had to give suggestions for the given scenario "What would happen if everyone became blind?" which was then measured in the number of proposals (fluency).

The International Organization for Standardization (ISO) proposes vibration standards for the evaluation for machine damage due to vibration in rotational machines, where some vibration parameters are given to measure the vibrationgrade. This work evaluates the relevance of the vibration standards in hydro plants that are proposed by the ISO, and also investigates if there are methods used in other countries could have greater importance. Through statistical analysis of collected data we got a better understanding of relation among different vibration parameters, and also the importance of correct choice of the parameters for the evaluation of vibration. We have found that the vibration standards available today in hydro plants are not reliable for the judgment of vibration?s grade.

The current study aimed to test the public self-consciousness impact on creative performance. An experimental design was used in which 40 participants were randomly assigned to two groups, one of which was the experimental group and the other was the control group. A mirror was used in the experimental group to induce public self-consciousness among the participants while they performed creativity tests. A consequence test was used where the participant had to give suggestions for the given scenario "What would happen if everyone became blind?" which was then measured in the number of proposals (fluency).

This master?s thesis aims to analyze the ongoing debate in Scandinavia on research evaluation of the humanities. This field of research uses bibliometrics, quantative analysis of bibliographical units as a research assessment tool. In recent years evaluative bibliometrics has been an increasingly used method. In Scandinavia, governments have introduced new funding models for research in higher educational institutions.

The purpose of this study is to investigate whether intensive teaching of reading strategies at an individual level can affect reading comprehension for students in second grade. A quantitative method with quasi-experimental design is used. All students in the experimental class trained on reading comprehension strategies at their particular level five times each. Before and after training a reading comprehension test was made. The reference class did the same test.

Modern semiconductor design methods makes it possible to design increasingly complex system-on-a-chips (SOCs). Testing such SOCs becomes highly expensive due to the rapidly increasing test data volumes with longer test times as a result. Several approaches exist to compress the test stimuli and where hardware is added for decompression. This master?s thesis presents a test data compression method based on a modified facsimile code.

Fortum has in a pilot project installed metering equipment with wireless communication in secondary substations in Stockholm. So far, the collected data are used only in specific projects.This master thesis was carried out at Fortum Distribution AB in Stockholm during 2013. The purpose of this study is to simplify and enhance the use of data in for example network planning process, by giving suggestions on how data can be managed and giving examples of analyzes that collected data can be used for.The electricity meter which Fortum has installed is a EDMI-Mk10A which is set to measure max/average/min values with a one hour time resolution of the following parameters: voltage (per phase), current (per phase) andactive power and active and reactive energy.In order to analyze the collected data an analysis tool is required. During this thesis two customized tools in Microsoft Excel have been developed, one for sorting data and one for analyzing.One aim of the thesis is to show examples of what collected measurement data can be used for. This work shows an example of analysis of active power, power factor, voltage, occurrence of interrupts and the relationship between outdoor temperature and power.This master thesis has among others resulted in the following advice: Expand the number of secondary substations with measuring equipment.

The purpose of this Masters thesis is to examine the performance of queries that are expanded by synonyms and hyponyms from Svenskt OrdNät, the Swedish version of the Princeton WordNet. Four different types of queries were constructed: a baseline query S1, the baseline query expanded with synonyms S2, the baseline query expanded with hyponyms S3 and finally the baseline query expanded with the synonyms and hyponyms used in S2 and S3. The terms for expansion were picked by hand. The queries were executed in the Query Performance Analyser QPA, a tool used in IR education and in experimental IR research for analysing and comparing the performance of individual queries. 20 topics from the test collection GP_HDINF were chosen for the experiment.

The purpose with this thesis is to clarify how estate agents working with their marketing and marketing strategies. Our study has occured in Kalmar and we have used five different estate agents for our collection of empiric?s data. We have worked with a qualitative methodology to achieve deeper knowledge about these five company?s which have been chosen for the study.We have selected theories that suit our subject and together with the empiric data these two parts will be compared which concludes in an analysis.

The topic of this bachelor thesis is the promotion of easy-to-read fiction for 10-12 year old children in public libraries. The number of easy-to-read fiction books is increasing on the book market. This can be expected to affect the public library. The hypotheses for the study are: 1) Public libraries expose easy-to-read fiction and use it in their reading promotion activities and, 2) The acquisition of easy-to-read books and the use of easy-to-read books in reading promotion activities have increased over the last five years. A self-completion questionnaire was distributed to 44 public libraries in Sweden.

This paper describes the development of a simulation model for the ambulance flow in the Västra Götalands-region of Sweden, and an analysis tool for the output of the simulation model. The aim of the simulation model was to be able to evaluate the outcome from changes in the ambulance operations, such as a reorganization of ambulances or an increase in intensity of the ambulance calls. This evaluation is meant to serve as decision support for the strategic planning of the ambulance operations. The analysis tool was developed to visualize the abundant geographical data produced by the simulation model in a meaningful way. The simulation model was validated against historical data which showed that the dispatch time for the highest prioritized ambulance calls corresponds well with historical data.

This paper describes the development of a simulation model for the ambulance flow in the Västra Götalands-region of Sweden, and an analysis tool for the output of the simulation model. The aim of the simulation model was to be able to evaluate the outcome from changes in the ambulance operations, such as a reorganization of ambulances or an increase in intensity of the ambulance calls. This evaluation is meant to serve as decision support for the strategic planning of the ambulance operations. The analysis tool was developed to visualize the abundant geographical data produced by the simulation model in a meaningful way. The simulation model was validated against historical data which showed that the dispatch time for the highest prioritized ambulance calls corresponds well with historical data.

Business Intelligence may help organizations in making the right decisions byproviding data for analysis which can be presented to decision makers. DataWarehouse which is a central part of Business Intelligence can be built in severalways but the methods presented by Ralph Kimball and Bill Inmons are considered thetwo main methods. The solution provided by Inmon focuses on integrating the entirebusiness into one large database using relational database development. Kimballhowever proposes dimensional database modeling by creating one or more data martsand integrating these using a data bus. Previous research has shown that the quality ofa Data Warehouse can be measured through critical factors such as data quality andsystem quality.