This master?s degree project concerns the combination of a multi dwelling passive house with solar energy for the generation of electricity and domestic hot water (DHW). Different alternatives with either solar thermal systems or photovoltaic (PV) systems are compared with two reference alternatives producing DHW from electricity or district heating. The economical comparison uses a life cycle cost (LCC) perspective based on the present value of expenditures for investment, energy and annual operating and maintenance.The energy yields from the solar energy systems were calculated by hand and with simulation software. Calculation and dimensioning of PV systems were carried out with a software called PVSYST.

Aim and Hypotheses The aim of the study was to investigate how episodic hypoxia affects resting blood pressure and the acute blood pressure response in healthy older adults. The following hypotheses were formulated for analysis in the study: Blood pressure increases acutely in healthy older adults during exposure to 150 minutes of hypoxia with SpO? 80%. Resting blood pressure decreases in healthy older adults after 15 repeated exposures of 150 minutes of hypoxia with SpO? 80% over a period of three to four weeks.

The retail banks are usually looked upon as conservative. Since the launch of internet banks in the 90's they have not developed much. Meanwhile the internet is developing in a fast pace and social websites are increasing in popularity. The purpose of this essay was to investigate how internet banking will develop in the near future based on interviews, literature and trend studies. With web 2.0 techniques the internet bank could develop to help the costumers take more informed decisions regarding their economic situation.

This thesis was carried out at Atlas Copco Tools and Assembly Systems. The purpose hasbeen to develop a design tool to be used for development of new electric motors for AtlasCopcos electric nutrunners. The focus of the thesis has been to increase productivity bydecreasing the power losses in an electric tool. The productivity is defined as themaximum number of tightenings a nutrunner can perform without becoming too hot.Before starting the development of this design tool an existing Matlab script, whichcalculates the losses in a slotless electric motor, has been studied and modified torepresent the real losses in a better way. The modification has been made by performingpractical studies of different losses and then adjusting existing parameters in the Matlabscript.Because design changes in one part of a mechatronic system can lead to a decrease inperformance of another part the choice of parameters that can be changed has been madeso that other parts of the system is affected as little as possible.A study of the existing tools efficiency during an entire tightening has been made toincrease the understanding of when and where the different losses appear and to comparethe modified Matlab script with the measured values.The design tool was formed so that it executes the Matlab script, that calculates thelosses, for a number of different design options and stores the alternative which producesthe least losses.

The purpose of this case study was to examine consequences of a limited social citizenship among young adults in the refugee camp of DeHeishe in Palestine. In order to receive a profounder understanding of conditions and structures that affects young adult?s experiences of social citizenship, status in the community and practices a case study was carried out during April 2013.The data has been collected by triangulation, conducted through nine interviews, 52 survey forms and several observations in DeHeishe camp. The data was analyzed through the theoretical approach of social citizenship, intersectionality and the concept of ?empower-ment?.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

The construction process which is used today while constructing residential buildings has for along time remained unchanged. Unfortunately the development process has gone away frombecoming industrialized and instead most of the work is done at the construction site. In thisrespect this is a worse alternative because the project outcome will be more expensive and theconstruction time will be longer. Skanska?s vision is to have a process which is more like the oneused in small residential buildings which is fully industrialized.The constructing process for residential building involves more parties and therefore it becomesmore complicated.

This thesis describes how the development of a mechanical enclosure to an alarmsystem proceeded. The project was made on behalf of Inferno Light Indusec AB.The goal set to this housing would offer a home alarm in which Indusec?s uniquesound system would give the customer a new alternative on the market. They wantedto, among other things, create an aesthetically but at the same time affordable alarm.The aesthetic theme is something that is missing in today?s market.

Amongst the published literature researching wet cleaning of paper there is a limited amount of studies conducted researching the method simmering water treatment. There are even less studies conducted on how simmering water affects the paper being treated when used as a cleaning method. Despite the limited research, there are literary reviews describing the method and suggesting it as an alternative for conservation of paper with iron-gall ink. The following study will therefore be examining, the somewhat unusual method, simmering water treatment, and comparing it to one of the more common wet cleaning methods: immersion washing. This is done to compare how the different temperatures of the water affect the paper. The types of paper used in this study consists of three dyed and four undyed papers. All of the papers are new, apart from one sample originating from 1847.

Det här projektet beskriver en kortfilm som är uppbyggd som en serietidning. Genom arbetets gång har vi inspirerats av en hel del filmer och serietidningar. Alla i gruppen har agerat i filmen samt varit röstskådespelare. Största delen av filmen är inspelad i greenscreen. Effekter och redigering har sedan skett i Adobe After Effects (videoredigeringsprogram), där även bakgrunder har lagts till.

Today, some kind of laboratory results is required for around 70% of the diagnostics and follow-ups for diseases. In many of the cases the time from sampling to a result is very critical. Therefore the discussion of how to improve this situation has begun. For many analyses serum has been the routine choice for a long time but now it is disputed. After blood collection in a serum tube it is essential to wait 30-60 minutes before centrifugation and analysis of the sample, a long time for someone in an acute state.

This report describes how the system may be exposed to oscillations and how this can lead to resonance. Resonance is a phenomenon that occurs when a system is affected by external periodic oscillations with frequencies close to the system's natural frequencies. Structures subjected to resonance can risk great damage and destruction, why resonance is something that is important to take into account when designing structures. Alternative ways to counteract resonance is to supply damping in the system. Damping means that the resonance decreases instead of letting the amplitude increase.The report discusses some examples on constructions that have experienced the effect of resonance.

This report describes how the system may be exposed to oscillations and how this can lead to resonance. Resonance is a phenomenon that occurs when a system is affected by external periodic oscillations with frequencies close to the system's natural frequencies. Structures subjected to resonance can risk great damage and destruction, why resonance is something that is important to take into account when designing structures. Alternative ways to counteract resonance is to supply damping in the system. Damping means that the resonance decreases instead of letting the amplitude increase.The report discusses some examples on constructions that have experienced the effect of resonance.

The relation between copyright and the right to privacy is complex and difficulties exist in balancing the rights. Copyright should not be limited. Therefore, to ensure the economic rights of the copyright owners, must the right to privacy instead be limited whenever the two rights collide.The implementation of IPRED into Swedish Law meant a vast change as private operators are able to request information concerning a suspected infringer before as well as during a proceeding concerning an infringement of intellectual property. The chosen implementation method goes beyond IPRED?s requirements and also sanctions a lower standard of proof to grant the requested information.

Context. In today?s society we use smart cards in many areas, NFC is a smart card technology that allows contactless interaction between a reader and the tag, the tag is often in the form of a card. NFC can be used for various payment methods or as access card to a building which makes life easier. In previous studies, the technique has proven to be weak to attacks using an NFC reader connected to a computer.